Topic: Project Phoenix update 12/5/2014 (Read 107817 times)

chubz · « **Reply #150 on:** January 13, 2012, 10:10:33 AM »

sooooo this is where you been hiding out

Ntrain2k · « **Reply #151 on:** January 13, 2012, 10:15:06 AM »

Quote from: chubz on January 13, 2012, 10:10:33 AM

sooooo this is where you been hiding out

sooooo this isn't a noob post

crxvtec91 · « **Reply #152 on:** January 13, 2012, 09:42:16 PM »

Quote from: Ntrain2k on January 13, 2012, 10:15:06 AM

Quote from: chubz on January 13, 2012, 10:10:33 AM
sooooo this is where you been hiding out

sooooo this isn't a noob post

Pun go make a intro post! Heres how its done

; http://www.realhomemadeturbo.com/forum/index.php/topic,16649.0.html

crxvtec91 · « **Reply #153 on:** January 20, 2012, 11:27:51 PM »

I think we need a few more pictures!

The start of a new manifold, Weird tech flanges, piping, and traction bar setup.

Plan is to make a true twin scroll manifold, with the 12cm hotside I should be able to make full boost almost 1k sooner. Only one way to tell.

And my friend baller tool box, yes thats a 32" tv, yes there is a loud system in it, and yes it is all hook up to a computer!:bigok:

HiProfile · « **Reply #154 on:** March 01, 2012, 07:14:46 AM »

lol, and here I was pumped getting $50 off a clearance 11-drawer chest that was $150.

crxvtec91 · « **Reply #155 on:** March 01, 2012, 04:13:15 PM »

Quote from: HiProfile on March 01, 2012, 07:14:46 AM

lol, and here I was pumped getting $50 off a clearance 11-drawer chest that was $150.

Shit I have a $100hf box

His box is WAY to baller for me!

crxvtec91 · « **Reply #156 on:** April 30, 2012, 12:31:37 PM »

Well it looks like a while since I last updated this post so lets get to it. I been busy getting stuff done and staying away from the computer in order to do so.

I had strip the interior of the car to clean out the glass and the layer of dirt from setting.

Oh damn we got a problem

Blood, sweat and lots of f bombs hahaha

Well onto the good stuff, new twin scroll manifold.

Then came this

Love sparks!

Doing work

Oh yea

Front in on.

Thats it for the weekend.

crxn · « **Reply #157 on:** May 14, 2012, 09:46:16 PM »

This rex has been through some engines/setups

crxvtec91 · « **Reply #158 on:** May 14, 2012, 10:56:30 PM »

Quote from: crxn on May 14, 2012, 09:46:16 PM

This rex has been through some engines/setups

A bunch just keeps getting better and better!

crxvtec91 · « **Reply #159 on:** May 15, 2012, 03:28:04 PM »

I been slacking on updating this build thread but no slacking on working on the car. Walbro 400 is in, its funny because the stock crx pump is bigger

. Also converted the whole car to -6an. Enough talk, pic time!

This is how much I had left from the 12' i bought.

With the fuel setup the traction bar was up. Open the wholes up from 1/2" to 5/8"

5/8 Inch Chromoly Swedged Tubes and hiem joints

Long bar and brackets

Mock up

Fully welded

Little black paint

Forgot to added I rewired the pump to boost power to it with a relay. Hoping to get more done this weekend.

ratcityrex · « **Reply #160 on:** May 15, 2012, 07:11:44 PM »

Just a heads up. You cant use just the tow hook bolt holes for the traction bar. It will tear them right the fuck out. You will also need to weld on a bracket or something on each and to use at least 1 of the bolt holes that the factory crossmember uses.

crxvtec91 · « **Reply #161 on:** May 15, 2012, 11:00:52 PM »

Quote from: ratcityrex on May 15, 2012, 07:11:44 PM

Just a heads up. You cant use just the tow hook bolt holes for the traction bar. It will tear them right the fuck out. You will also need to weld on a bracket or something on each and to use at least 1 of the bolt holes that the factory crossmember uses.

that's all I have to do, but later on. I remember seeing you do that.

crxvtec91 · « **Reply #162 on:** May 21, 2012, 12:24:55 PM »

Time for some updates!

92CXyD · « **Reply #163 on:** May 21, 2012, 12:43:57 PM »

Nice will this be the first D in the 500bhp RHMT range?

crxvtec91 · « **Reply #164 on:** May 21, 2012, 12:51:18 PM »

Quote from: 92CXyD on May 21, 2012, 12:43:57 PM

Nice will this be the first D in the 500bhp RHMT range?

I think it will make 500hp off boost at around 35psi, then the 120shot

boosted 00 black si · « **Reply #165 on:** May 24, 2012, 07:12:00 PM »

do work!!!!!!!!!!!!!!!!!!

crxvtec91 · « **Reply #166 on:** May 25, 2012, 09:09:36 AM »

Quote from: boosted 00 black si on May 24, 2012, 07:12:00 PM

do work!!!!!!!!!!!!!!!!!!

Trying, going to see if I can get everything done this weekend with the exclusion of the new manifold.

Gold DA9 · « **Reply #167 on:** May 29, 2012, 01:05:54 PM »

Cant wait. My hatch wont be done, so the accord will be there. What numbers did Catsman BMW make again? Cause i have to beat that.

crxvtec91 · « **Reply #168 on:** May 29, 2012, 01:07:08 PM »

Putting in work, UPDATE TIME!

New filter and line

Oem rail coverted to -6 in and out

Cant leave it like this

Rhmt Fowee FTW

Charge piping done

Almost there!

boosted 00 black si · « **Reply #169 on:** May 29, 2012, 08:18:51 PM »

o yeaaaaaa

crxvtec91 · « **Reply #170 on:** May 30, 2012, 12:59:08 PM »

Quote from: boosted 00 black si on May 29, 2012, 08:18:51 PM

o yeaaaaaa

Putting in some work today hope all it goes well.

crxvtec91 · « **Reply #171 on:** May 31, 2012, 08:17:44 AM »

Time for some more work! Put in about 1 hour making this;

Thats it for now.

Gold DA9 · « **Reply #172 on:** May 31, 2012, 01:00:59 PM »

need more!!!!!

crxvtec91 · « **Reply #173 on:** May 31, 2012, 01:04:30 PM »

Quote from: Gold DA9 on May 31, 2012, 01:00:59 PM

need more!!!!!

Its getting there!

Gold DA9 · « **Reply #174 on:** May 31, 2012, 03:28:22 PM »

Quote from: crxvtec91 on May 31, 2012, 01:04:30 PM

Quote from: Gold DA9 on May 31, 2012, 01:00:59 PM
need more!!!!!

Its getting there!

i know. Cant wait to see it in person.

crxvtec91 · « **Reply #175 on:** May 31, 2012, 05:06:06 PM »

Quote from: Gold DA9 on May 31, 2012, 03:28:22 PM

Quote from: crxvtec91 on May 31, 2012, 01:04:30 PM
Quote from: Gold DA9 on May 31, 2012, 01:00:59 PM
need more!!!!!

Its getting there!

i know. Cant wait to see it in person.

I need to see if my friend will have time to weld the manifold soon, im running out of time....

jdmhatchracer94 · « **Reply #176 on:** June 01, 2012, 01:22:02 AM »

What size fittings u use for the fuel rail?

crxvtec91 · « **Reply #177 on:** June 01, 2012, 08:57:48 AM »

Quote from: jdmhatchracer94 on June 01, 2012, 01:22:02 AM

What size fittings u use for the fuel rail?

http://www.summitracing.com/parts/EAR-991945ERL

This was the fitting I used, it had the right thread pitch, on the other side of the rail I had to cut, drill, and tap for it.

crxvtec91 · « **Reply #178 on:** June 07, 2012, 05:04:49 PM »

Looks like my maifold should be done by this weekend lets see if I can fire her up!

boosted 00 black si · « **Reply #179 on:** June 09, 2012, 05:33:37 AM »

do work

News:

Author Topic: Project Phoenix update 12/5/2014 (Read 107817 times)