Topic: POST RIPPER VIDS HERE!!! (Read 77139 times)

ApexSilver06MR · « **on:** September 13, 2009, 01:10:26 PM »

boosted? all motor?

post that shit up. we will keep this like that wax your wilson thread. any useless chat will be deleted.

no random videos you find on youtube or anything.

i want to keep this for RHMT nogs, or friends, so dont search youtube for turbo civic and post it....

Here is Joe's (dr. d series)

http://s5.photobucket.com/albums/y198/DrDSeries/?action=view&current=6f866053.pbr

http://s5.photobucket.com/albums/y198/DrDSeries/?action=view&current=f81b4fdf.pbr
your welcome.

also here is a car that chris tuned back in 2004

250HP ALLMOTOR h22 Crx Testrun
Worlds first h2b. Stock bottom end h22 9500 rev limiter tuned on zdyne by my dumbass. Back in 2004. Car was laying down 11.70's in full street trim driving around vegas.

88dx · « **Reply #1 on:** September 13, 2009, 10:36:13 PM »

I havent had a car worth doing ripper vids in 2 years

Ripper vid on teh bike
http://www.vholdr.com/node/34691

colt45 · « **Reply #2 on:** September 13, 2009, 10:50:22 PM »

Best Rappers Alive, Not Lil Wayne

ratcityrex · « **Reply #3 on:** September 14, 2009, 08:05:32 PM »

Random Hero's dads 4 door

Random Strike's tt 5.0

Ghost Si...... I think this is him???

My 1st turbo setup on the dyno stock d16a6 w/ ihi rhb5 with stock exhaust over the rear axle. Choking it to 175whp/179tq @ 5k

BTW it was about 30* outside when we were getting ready for the shop to open so I sat in my car with it running for 30min, so thats all built up condensation in the exhaust. It rains on randy.....lol

Teg2boo · « **Reply #4 on:** September 15, 2009, 12:25:45 AM »

Not a very good ripper, but its a video. Car is faster now I have to make another vid.

Integra 90 Precision turbo SC34, DSM 450cc stock internal

brine04 · « **Reply #5 on:** September 15, 2009, 12:43:50 AM »

http://videos.streetfire.net/video/c57107da-051f-4c12-92fa-9b0b0020ba23.htm?ref=1333f303-61c2-47e1-bb1e-6947b2931a06 Little one tire fire Levi filmed. Actually only 5psi not 10. Would creep to 10 at the top of 5th.
http://videos.streetfire.net/video/b5221909-b379-4599-ba5d-9b0b0031c0ff.htm
Fucking around with the 5psi spring in and some shitty basemap we scaled for 880's car obviously makes no power.

danz · « **Reply #6 on:** September 15, 2009, 12:50:56 AM »

11.80, d16a6 holset

Dans Honda Civic EF SOHC Non Vtec Turbo - 11.80

Urban Indian · « **Reply #7 on:** September 15, 2009, 12:52:13 AM »

Urban Indian · « **Reply #8 on:** September 15, 2009, 01:09:08 AM »

Stock LS dsm 450 GT35R

Civic turbo - 2nd gear burnout

400 Bad Request

Turbo+Civic+burnout+-+2nd+gear

<a href="http://videos.streetfire.net/video/Turbo-Civic-1201-113_184047.htm"><img src="http://px5.sfstatic.com/thumbs/0000/04/74/184047.jpg"/><br>Turbo Civic 12.01 @113</a>

http://s154.photobucket.com/albums/s248/Urban_Indian/?action=view&current=637f9c28.pbr

Turbo+Civic+LS+11.75+%40+115mph

END OF THE LS

Turbo+Civic+LS+Carnage

2.0L GSR HX52 424whp/267ftlbs

Corey · « **Reply #9 on:** September 15, 2009, 03:48:11 AM »

my old CRX.

Corey's Turbo CRX

ApexSilver06MR · « **Reply #10 on:** September 15, 2009, 11:15:24 AM »

this is damills car. he isnt very active

Stock b20 turbo civic 4 door on 5 pounds 13.4 @ 106 mph

look who this is

Built H22A 9:1 Holset H1C Turbo Civic

glustic · « **Reply #11 on:** September 18, 2009, 02:11:07 AM »

My buddies evo rs, and my bosses sl 55 amg
http://www.youtube.com/watch?v=q0oPML2NoiA

In car

http://www.youtube.com/watch?v=Y3Z_DwAqRdw

turbo4life · « **Reply #12 on:** September 18, 2009, 03:46:27 PM »

hey my niggaz no more diry b16 melted piston dew to not solders injetor wires and one came a little loose

so i got a drity ls in it for now rips better than the last on

14-to 12 psi boost

quality sucks ass!!!!! sorry

enjoy RHMT NOGS

SHOUT OUT TO MY pop yo lock NIGGA JAY
VID 00087

chris · « **Reply #13 on:** September 18, 2009, 05:49:44 PM »

Quote from: Corey on September 15, 2009, 03:48:11 AM

my old CRX.

Corey's Turbo CRX

nice

lsone_chevelle · « **Reply #14 on:** September 24, 2009, 07:52:28 PM »

Heres 2 of my buddies. The S10 is a built 6.0l 88mm under the bed, nitrous, a2w, meth. Fucking rad. Went 9.38@153 4000lbs, 2 12" subs, ac, power windows, locks, etc.

The notch is a junkyard built 6.0l with twin 70mms, meth. Went 9.53@148 full interior and weak 60 foots.

LS1 S10

http://www.youtube.com/user/n2ovolvo#play/all/uploads-all/2/CqQvX0uj1tk

Zeniceguycrx · « **Reply #15 on:** September 25, 2009, 09:57:17 AM »

FILE0207

widebody93 · « **Reply #16 on:** September 27, 2009, 08:39:03 PM »

N/A

Edgewater with a fucked up trans cables

2-Step set way too high on autocross slicks

New Manifold from Eville140

12.84 on Holset with a leaking manifold:ebay:

Next season hopefully I'm not working 70+hrs a week

danz · « **Reply #17 on:** October 03, 2009, 06:37:52 PM »

slayed my personal best

11.3 @ 120mph

Turbo EF SOHC Non-VTEC D16A6 Holset goes 11.366 @ 120.70 in the quarter mile

chris · « **Reply #18 on:** October 03, 2009, 08:35:14 PM »

Quote from: danz on October 03, 2009, 06:37:52 PM

slayed my personal best

11.3 @ 120mph

Turbo EF SOHC Non-VTEC D16A6 Holset goes 11.366 @ 120.70 in the quarter mile

Colt cam seems to of made a huge difference. Half second difference

chris · « **Reply #19 on:** October 03, 2009, 09:02:31 PM »

What does colt charge for d16a6 regrinds?

soontobeDA · « **Reply #20 on:** October 04, 2009, 09:28:14 PM »

slow teg:( 8psi
i fail at trying to make it show up instead of a link

tony's Turbo stock LS 40-120

turbohf · « **Reply #21 on:** October 04, 2009, 09:46:09 PM »

how about some NA B20VTEC? slight reverse roll into second till i figured i was out of camera view lol

danz · « **Reply #22 on:** October 04, 2009, 11:28:04 PM »

Quote from: chris M on October 03, 2009, 08:35:14 PM

Quote from: danz on October 03, 2009, 06:37:52 PM
slayed my personal best

11.3 @ 120mph

Turbo EF SOHC Non-VTEC D16A6 Holset goes 11.366 @ 120.70 in the quarter mile

Colt cam seems to of made a huge difference. Half second difference

What does colt charge for d16a6 regrinds?

its around $300 CAD. not really cheap but the results speak for their self.

chris · « **Reply #23 on:** October 05, 2009, 01:12:53 AM »

Not really that pricey thats the going rate for most cam grinding except delta. Either way it looks like a totally different setup with the new camshaft. Fuckin rips with that colt.

lsone_chevelle · « **Reply #24 on:** October 10, 2009, 01:12:05 PM »

turbo sundance on 14lbs

100 1431

100 1431

hotrex · « **Reply #25 on:** October 14, 2009, 09:52:12 PM »

my old ef hatch. ls on 11psi

http://smg.photobucket.com/albums/v691/maddog2020/?action=view&current=000_1749.flv

http://smg.photobucket.com/albums/v691/maddog2020/?action=view&current=000_1747.flv
http://smg.photobucket.com/albums/v691/maddog2020/?action=view&current=000_1748.flv

Urban Indian · « **Reply #26 on:** October 14, 2009, 11:45:26 PM »

10 88 @ 124mph 27-29 psi 8500rpm

Turbo Civic GSR 701hp 459ft lbs 35psi

foumer · « **Reply #27 on:** October 15, 2009, 10:20:20 AM »

My all motor shit back in 2006. Too bad I dont have a video when it ran 11.6 with some help of NOS.

12sec all motor civic

jchrm80 · « **Reply #28 on:** October 16, 2009, 01:12:57 PM »

crx missin gears like a cool.

rudebwoy · « **Reply #29 on:** October 18, 2009, 03:06:49 PM »

autobahn
autobahn

2 of my latest vids speedo pegged 3rd to 5th after that my trannsmission was ruined. tore up 4th and 5th.
was boosting 21 psi on e85

News:

Author Topic: POST RIPPER VIDS HERE!!! (Read 77139 times)

chris

chris

chris

chris