Topic: ~~~~~~~~~~~Blown turbo seals 9/15/10 Ratcityrex's B18a1 Build 296hp/289tq NO56k (Read 165486 times)

ratcityrex · « **Reply #150 on:** August 31, 2009, 12:34:32 PM »

Quote from: malichite on August 31, 2009, 12:21:59 PM

That blade sucked ass. I just ordered a new one though. Should be cutting like butter

Dialed!!! It will be a few weeks b4 I can make it back down. I'm in a wedding this weekend, and then next weekend I have to put a new roof on my in-laws house. So maybe the 19th if your not doing anything?

ratcityrex · « **Reply #151 on:** August 31, 2009, 07:05:51 PM »

Well hear are a few pics of the new stuff I just got from chris m

74 taper boar down to 68mm tb compared to stock 58mm

70-68mm spacer plate

Ported b18b intake

And last but not least. Down the throat of the bitch

chris · « **Reply #152 on:** August 31, 2009, 10:50:45 PM »

Glad to see everything made its way safe. That manifold got 4 cans of the finest super tech carb cleaner

88dx · « **Reply #153 on:** September 01, 2009, 01:06:09 AM »

AJ u should trade me TB's i know u want the BLING BLING polished TB and id gladly have a satin finished one :yes:

Rob.K · « **Reply #154 on:** September 01, 2009, 06:49:47 AM »

wicked build, well done. I have to ask though, where's the porn? this is rhmt, pron is a must for a great build thread like this!

Teg2boo · « **Reply #155 on:** September 01, 2009, 09:54:49 AM »

Quote from: Rob.K on September 01, 2009, 06:49:47 AM

wicked build, well done. I have to ask though, where's the porn? this is rhmt, pron is a must for a great build thread like this!

The whole thread is fapping material!

ratcityrex · « **Reply #156 on:** September 01, 2009, 11:37:44 AM »

Quote from: Rob.K on September 01, 2009, 06:49:47 AM

wicked build, well done. I have to ask though, where's the porn? this is rhmt, pron is a must for a great build thread like this!

GTFO of my thread with your gay ass tire streaching homo ways the last thing I want is someone who dose this to there tires

Tell me how ofton do you have to change out wheel bearings in your car?

malichite · « **Reply #157 on:** September 01, 2009, 11:41:14 AM »

Rob.K · « **Reply #158 on:** September 01, 2009, 01:43:36 PM »

Quote from: ratcityrex on September 01, 2009, 11:37:44 AM

Quote from: Rob.K on September 01, 2009, 06:49:47 AM
wicked build, well done. I have to ask though, where's the porn? this is rhmt, pron is a must for a great build thread like this!

GTFO of my thread with your gay ass tire streaching homo ways the last thing I want is someone who dose this to there tires

Tell me how ofton do you have to change out wheel bearings in your car?

post porn and make it a real hmt build thread, don't play fucking games.

chris · « **Reply #159 on:** September 01, 2009, 01:44:58 PM »

who wants rob k banned?

RHD DC2 · « **Reply #160 on:** September 01, 2009, 02:08:45 PM »

I enjoyed this thread until i read robs un-needed ish :yes:

very nice build ratcity.

Lowerit · « **Reply #161 on:** September 01, 2009, 02:33:03 PM »

Guy with 43 posts and wheel strech faggotry telling guy with 2700 posts of awesomeness what to do?

HuH?

That's for telling us it's RhMt... we knew... did you?

keep the pics coming.

malichite · « **Reply #162 on:** September 01, 2009, 07:29:36 PM »

Quote from: chris M on September 01, 2009, 01:44:58 PM

who wants rob k banned?

Yes, the remove all of this Rob.k faggotry from this more then fapping thread.

Joseph Davis · « **Reply #163 on:** September 01, 2009, 08:20:00 PM »

We made our point, get the thread back on track.

ratcityrex · « **Reply #164 on:** October 01, 2009, 01:54:35 PM »

I hard wired my fan on the other day.....lol
Thats all Ive done with it in the last month....lol

This Saturday I plan on putting in some hours in the garage working on the car.

ApexSilver06MR · « **Reply #165 on:** October 01, 2009, 01:59:34 PM »

Quote from: chris M on September 01, 2009, 01:44:58 PM

who wants rob k banned?

me!!!!!!!!!!

Teg2boo · « **Reply #166 on:** October 01, 2009, 03:19:19 PM »

Quote from: ratcityrex on October 01, 2009, 01:54:35 PM

I hard wired my fan on the other day.....lol
Thats all Ive done with it in the last month....lol

This Saturday I plan on putting in some hours in the garage working on the car.

Its not the only thing you've done, you cleaned your garage. It counts! Stay motivated!

ratcityrex · « **Reply #167 on:** October 03, 2009, 11:30:26 PM »

Got the new intake/spacerplate/tb on today. ;D
Drained coolent, put 170* thermistat in, fixed leak on rad(sensor was just loose $:-\$ ), got
all the lines hooked up fuel/vac.

So tomorrow i just have to go get some 3/8" line for my brake booster and mod my throttle cable braket to fit on this obd1 intake mani, and set up my tps/idle blade fill the radiator burp the system move my o2 sensor to my headder insted of behind my leaky doughnut at
the end of the hedder...lol and check everything else out.

Towdogg · « **Reply #168 on:** October 03, 2009, 11:45:44 PM »

Post the results......Those TB's help alot....

ratcityrex · « **Reply #169 on:** October 03, 2009, 11:54:18 PM »

I would like to find a dyno local that would let me do a pull or two for less than a testical and a kidny in price. I would like to see how much more power it makes and where it makes it.

malichite · « **Reply #170 on:** October 04, 2009, 10:49:36 AM »

A1 down here in PO will let you get on for $50 and then 10 per pull after that

ratcityrex · « **Reply #171 on:** October 04, 2009, 09:57:50 PM »

Well tb/plate/intake combo is the shit!!! Throttle response is wild!! Chirped the tires 2 time just trying to leave from a stop normal....lol Gona have to get use to driving it. That and its the smoothest this motor has ever ran. Pulls the most on decell ive ever had on a honda motor. 26+ in on vac in decel. The new thermostat did just what i thought it would. Lowered temps by about 10* now when im sitting at a light at full temp im right about 200ish b4 the radiator. I havent hooked up the laptop to see what it is after the radiator. Im sure its somewhere around 170ish. So i didnt hamer on it yet, ive got to do a little tuning, but i do still have a slight 3rd gear grind above 5k. I was hoping new trans fluid would have helped, it did on second but not 3rd. So this week im gona try and get the intercooler end tankes finished and try and get the cams and valvecover and catch can in.

All in all it felt good to mark a few things off the list.

jdmhatchracer94 · « **Reply #172 on:** October 04, 2009, 10:54:29 PM »

lookin good man keep it goin on I will have mine done some day.

ratcityrex · « **Reply #173 on:** October 04, 2009, 11:38:01 PM »

Thanks man. Little by little ill get this thing knocked out. Its just taking me forever.

chris · « **Reply #174 on:** October 05, 2009, 01:27:34 AM »

Glad your happy with the results.

jdmhatchracer94 · « **Reply #175 on:** November 23, 2009, 11:02:01 PM »

any updates?

ratcityrex · « **Reply #176 on:** November 23, 2009, 11:41:19 PM »

no updates, just working 6-3 6days a week, and the 1 day off and 3-5 days after work im working on other peoples cars for extra cash. seems like everyday i have someone asking me to change all there fluids on there car or do a timing belt or a clutch. All I know is the winter is when everyones cars break down and the cant afford shop prices. But i work for $20-25 an hour and they are fucking pumped. I figure after the first of the year I will be back to the car, im so close to the end its not funny. Im figuring somewhere around feb/march i will be contacting mr. black man LEED himself for some tuning love. I would love to max this fucking turbo out. Im thinking boost sbould be all in by 3200-3500rpms and pull like a son of a bitch till 6500ish

88dx · « **Reply #177 on:** November 24, 2009, 12:22:59 AM »

sounds like you need to drink more and tell everyone else to fuck off :yes:

ratcityrex · « **Reply #178 on:** November 24, 2009, 12:30:15 AM »

Fuck that holmes, i be makin me some moneyz!!! =) it will all slow down in about a month and a half. Then i will drink beer and work on the car!

BangBusMaster · « **Reply #179 on:** November 24, 2009, 12:58:56 AM »

I'm ready for this slut.

News:

Author Topic: ~~~~~~~~~~~Blown turbo seals 9/15/10 Ratcityrex's B18a1 Build 296hp/289tq NO56k (Read 165486 times)

chris

chris

chris