:::RHMT::: Real Home Made Turbo
General Category => Fabrication => Topic started by: weirtech on April 23, 2009, 01:56:26 PM
-
this is going on a local drift car i am sponsoring this year. his current setup is an ebay manifold that is starting to crack, so i made a jig to replace the manifold but would allow him to run all the other components. we will slowly upgrade the rest of the kit as well.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi47.photobucket.com%2Falbums%2Ff161%2Fweirtech%2FFab%2520for%2520Nissan%2FDSCN0088.jpg&hash=5e8e53757ac87b4c8fe8b58f8d9ed2f997578431)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi47.photobucket.com%2Falbums%2Ff161%2Fweirtech%2FFab%2520for%2520Nissan%2FDSCN0093.jpg&hash=f5f03db153cb3cdde9a63bd31b2dd5d50b44fc27)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi47.photobucket.com%2Falbums%2Ff161%2Fweirtech%2FFab%2520for%2520Nissan%2FDSCN0094.jpg&hash=9d77a033c3c65f7e4b8cce11af4142c4e8e64a7e)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi47.photobucket.com%2Falbums%2Ff161%2Fweirtech%2FFab%2520for%2520Nissan%2FDSCN0097.jpg&hash=a18a76914e2ccb54027f27ccee2de7ef530acdea)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi47.photobucket.com%2Falbums%2Ff161%2Fweirtech%2FFab%2520for%2520Nissan%2FDSCN0099.jpg&hash=7f76f49471f449e80f8624ab0e0cbd34b8339c6d)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi47.photobucket.com%2Falbums%2Ff161%2Fweirtech%2FFab%2520for%2520Nissan%2FDSCN0100.jpg&hash=b4e7580d393b83a0c6f6c82e7700981da4c88d05)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi47.photobucket.com%2Falbums%2Ff161%2Fweirtech%2FFab%2520for%2520Nissan%2FDSCN0087.jpg&hash=bb1979426da21cc29dd5f43066145e70749f75ca)
-
That logo is fucking sweet. Oh yeah, the manifold too.
-
Once again that some really good work. ;D :yes: :noel:
-
mint
-
I like KA24s.
-
beautiful work Aaron!! There are some runners that are really close. :o Well done as usual!
-
i had a ka24e in my stanza, fuck yes
-
i had a ka24e in my stanza, fuck yes
FUCK YEA, i picked up a 90 stanza, 5 speed for 200 bucks, it needed a fuel pump. went back the next day with a 100 dollar one from vatozone and drove the bitch away. i used to bounce that thing off the rev limiter like it was my job. then some dumb bitch pulled out infront of me and totaled it. all was not lost, i got a 1600 dollar insurance check for a car i had 400 bucks in, and then i bought my first eg
anyway, shit looks tits as usual. check your pm too
-
looks like trouble at the spaghetti factory, bitchin manifold. i take it that is suppose to be an equal length runner type manifold? time to turn up the awesome!
-
thanks.
it isn't supposed to be equal length. i didn't measure the runners afterward. i think there might be about a 2-3 inch variance. besides, equal length is just a big hype catch phrase for most... equal length does not mean equal flow.
-
thanks.
equal length is just a big hype catch phrase for most... equal length does not mean equal flow.
Jeez Aaron .... youre SO wrong ... just ask all the "intrawebb experts" and "google mechanics" ....... ::)
Its also IMPOSSIBLE to make more the 250 hp on a log manifold ;)
-
I like KA24s.
Iono, my firend's KA24 doesn't want to run any more. No matter what we do to the chip, it still gets WAY too much fuel. Its almost like all injectors fire for each individual pulse, that's all I can guess.
That looks way better than his manifold though. His is some really goofy shit.
-
I like KA24s.
Iono, my firend's KA24 doesn't want to run any more. No matter what we do to the chip, it still gets WAY too much fuel. Its almost like all injectors fire for each individual pulse, that's all I can guess.
Setup? When did the problem manifest?
-
I like KA24s.
Iono, my firend's KA24 doesn't want to run any more. No matter what we do to the chip, it still gets WAY too much fuel. Its almost like all injectors fire for each individual pulse, that's all I can guess.
That looks way better than his manifold though. His is some really goofy shit.
fuck you jeff
first post, not that it applies in this thread buuuuuuuut
this is jeff, aka hiprofile
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fxs125.xs.to%2Fxs125%2F08126%2Feaster_porn494.jpg&hash=3c248ea7f9df8fe2861e58ee9e41f9887cbcdc71)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Flesbiantuna.com%2Fteen-lesbians-8.jpg&hash=99a0031c56a20176d53e421956beefbe02360581)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.exclusivepussy.com%2Frss%2FLTH35000890%2Fl_h_rss002.jpg&hash=fc0694d0040a6a23eaa0f993e24a6cd38b3df5fc)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.melissamidwestnude.com%2Fimages%2Fmelissa-midwest-lesbian-sex.jpg&hash=03401f7285330ee4db0c2e0d792b8c9427106355)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fpromo.stunners.com%2Fpic%2F0812shawnalenee%2F%3Fid%3D116301%3Bp%3D2&hash=6c10b646553d27eec9b81007201ff6d3390e92af)
here is my goofy shit, sorry its not up to your standards jeff
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg23.imageshack.us%2Fimg23%2F3906%2Ftmp1455.jpg&hash=2f593edcca1534f96aeb29c5fdaa0a0fa4c5ab6c)
-
this is jeff, aka hiprofile
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fxs125.xs.to%2Fxs125%2F08126%2Feaster_porn494.jpg&hash=3c248ea7f9df8fe2861e58ee9e41f9887cbcdc71)
So what if I like to wear bunny suits? Your mom doesn't look like she minds... :noel:
Get your car running and you can have a "proper" intro thread. I'm sure the nogs here would love to see your car too. :yes:
-
hopefully this week buddy
turbo comes wednesday, so I will put it all back together and hope those o rings were the only issue
-
Weirtech- Any chance you do RB20 manifolds? or know people who do?
-
not off hand. where are you located? there is a good chance i can recommend a fab shop local to you.
aaron
-
Weirtech- Any chance you do RB20 manifolds? or know people who do?
What turbo? What style manifold?
-
not sure on the turbo size or style. Just looking whats out there. Located in Philadelphia PA. Thanks.