Topic: NOW WITH TWIN TURBO LQ4 ACTION~~~~~~~~~~~ 1966 RAT CITY RED ROCKET!!!~~~~~~~~ (Read 155802 times)

dvst8r · « **Reply #660 on:** February 20, 2015, 04:39:45 PM »

Some fence post outta graft up nice to those manifolds...

ratcityrex · « **Reply #661 on:** February 20, 2015, 04:52:46 PM »

I got some 2" galvanized water pipe. I'm gonna weld it up and try and kill myself with poison gas.

dvst8r · « **Reply #662 on:** February 20, 2015, 04:57:26 PM »

Quote from: ratcityrex on February 20, 2015, 04:52:46 PM

I got some 2" galvanized water pipe. I'm gonna weld it up and try and kill myself with poison gas.

Satin coat buffs off with a flapper disc pretty easy.

ratcityrex · « **Reply #663 on:** February 20, 2015, 04:59:47 PM »

Just gonna hit it with the grinder and a sanding disk, and then ware my respirator while I mig it up.

dvst8r · « **Reply #664 on:** February 20, 2015, 08:17:18 PM »

Quote from: ratcityrex on February 20, 2015, 04:59:47 PM

Just gonna hit it with the grinder and a sanding disk, and then ware my respirator while I mig it up.

Leave a door open too and you will be good.

ratcityrex · « **Reply #665 on:** February 23, 2015, 11:35:55 AM »

Ordered up a throttle body coupler and t bolt clamp last night. Put in a jew offer on a intercooler. I guess I'll see if my sweet talking the seller works. Once I get those, I'll set up the intercooler and see what I have to do about my radiator. Have a feeling it's not gonna work, but worst comes to worse, I'll order up a rad from speedway.

ratcityrex · « **Reply #666 on:** February 24, 2015, 04:55:09 PM »

Went by my local pacific/central welding store today. Checking o see if they had any drop/remanence Of 2" sch40. Had about a 2' piece laying in the corner. Needless to say I walked out with it for a whopping $3.55 so I'm gonna take this galvanized bullshit back to home depot and get my $20 back. Also order up my intercooler today. Dude didn't take my jew offer, but counter offered and still sold it to me for $30 less then anyone else on ebay.

ratcityrex · « **Reply #667 on:** February 26, 2015, 01:54:00 PM »

ok, So.........

So this is the intercooler I ordered. Will be here next week. Got it on ebay. It was $175 buy now or offer. So I offered $130 and he counter offered $155 shipped. So I snagged it.

Ordered a 1.5 to 1.75 90* coupler to come off my Chevy lower rad hose,

Then I ordered 2 of these 1.5 90* couplers to snake the rest of the lower hose to the thermostat housing.

Picked this upper 2005 suburban radiator hose at my local auto parts store to test fit. If it looks like it will work im gonna take it back and order it on online for 1/2 the price of the local jew auto parts stores.

Here is the throttle body coupler I ordered from Squeeze performance. I also ordered a 3.75" t bolt clamp. If you use the couplon code "sloppy" you get like 25% off. and free shipping on orders over $20. Got the coupler and clamp for like $21 shipped

Hope all this shit shows up by Monday so I can figure out what else I need to order up for hoses.

ApexSilver06MR · « **Reply #668 on:** February 28, 2015, 03:26:02 AM »

Holy shit. A ton of progress. Looks good AJ. I need to come to the meet this year.

highroller54 · « **Reply #669 on:** March 02, 2015, 01:12:59 AM »

What are you doing to the meat now?

ratcityrex · « **Reply #670 on:** March 02, 2015, 01:35:20 AM »

Well my intercooler will be here tomorrow. I spent yesterday rotatilling my back yard. So I have to finish up the rest of it up.

So later on this week I should hopefully get some time to get the intercooler mounted up and then see what the fuck I'm gonna do with the radiator. Once the rad plumbing is done I can then get the exhaust manifolds finished and the turbos mounted and the charge pipes and exhaust done.

ratcityrex · « **Reply #671 on:** March 04, 2015, 04:19:39 PM »

So it looks like I'm gonna drop my radiator off at a shop local to me to have them move the top hose outlet on the rad from the pass side to the drivers side. It will make a whole bunch more room for me to run my charge pipes. Guy is only gonna charge about 20-30 to move it over and plug the old hole. Once I get that back I can then start mock up of my charge pipes and where I need the turbos and all the bullshit. Until then it's a hurry up and wait kinda thing.

ApexSilver06MR · « **Reply #672 on:** March 04, 2015, 10:37:56 PM »

Looking good Holmes.

jdmhatchracer94 · « **Reply #673 on:** March 04, 2015, 10:48:16 PM »

both my hoses run on the pass side

ratcityrex · « **Reply #674 on:** March 05, 2015, 12:57:44 AM »

So I think on monday I'm gonna try to set my intercooler up and see where I'm at as far as fitment goes. And then I can start fucking with charge pipes.

Ntrain2k · « **Reply #675 on:** March 05, 2015, 08:52:08 AM »

Don't know if your interested, but....

http://ls1tech.com/forums/parts-classifieds/1773638-2-ls7-cam-shafts.html

ratcityrex · « **Reply #676 on:** March 05, 2015, 10:15:44 AM »

Not for this build. For the next one maybe.

Random Hero · « **Reply #677 on:** March 06, 2015, 01:33:19 PM »

ls7 cam would make horrible power with his setup. everything about it is wrong.

ratcityrex · « **Reply #678 on:** March 06, 2015, 02:04:09 PM »

Well, I'm cutting out of work early today to drop my radiator off at a local shop to have him move the top hose outlet on the radiator from the drivers side over to the pass side. Here is how close it is right now. It only about 3" away.

Hope to have it back by Monday so I can start fitting up the intercooler, charge pipes and turbo placement. Then I can tac weld up my shit for the exhaust manifolds and really start buttoning it up.

turbohf · « **Reply #679 on:** March 06, 2015, 03:23:38 PM »

sweet. progress...

ratcityrex · « **Reply #680 on:** March 06, 2015, 08:43:36 PM »

Well fuck. Took it to the guy and he said it's gonna leak. Said it's falling apart inside and that it would cost $500 to remake it. Said fuck all that noise. So I'm going to probably pick up a radiator on ebay. Fuck!!!! More money I didn't want to spend. This is the one I'm looking at. It's for a early mustang.

http://pages.ebay.com/link/?nav=item.view&id=201299496129&alt=web

ratcityrex · « **Reply #681 on:** March 09, 2015, 06:28:44 PM »

Well I decided to not pull the trigger on the new radiator just yet. So I figured I would start mock up of the intercooler.

Intercooler is pretty good sized

turbohf · « **Reply #682 on:** March 09, 2015, 07:17:49 PM »

looks like you need to do some more trimming. gonna be awesome. got a pic of it a little further back?

ratcityrex · « **Reply #683 on:** March 09, 2015, 09:09:06 PM »

I have to trim out for the silicone couplers, I'm going to pull the grill and the front bumper assembly tonight and get my Depth set then I'll order up my couplers. but before I do that I'm going to dig through my bucket that I have of extra couplers

ratcityrex · « **Reply #684 on:** March 11, 2015, 01:39:54 PM »

So here is the intercooler bolted in. I pushed it as far forward as I could before hitting the grill. I was able to gain about a extra 3/4" over what I thought I was going to.

So in the picture you can see the bolts that hold the intercooler on are a little long. I got some that are even longer and I'm going to drill holes in the radiator flange and mount the radiator on the same bolts. That way I don't have to make any crazy brackets that hold the rad in place.

highroller54 · « **Reply #685 on:** March 16, 2015, 03:31:30 PM »

Run yet?

ratcityrex · « **Reply #686 on:** March 16, 2015, 09:55:09 PM »

Quote from: highroller54 on March 16, 2015, 03:31:30 PM

Run yet?

Lol goal is to make it move under its own power by next summer....lol as much as I would like this summer It might be a stretch.

ratcityrex · « **Reply #687 on:** March 17, 2015, 07:00:04 PM »

Well....

Intercooler Installed for final fit

baller shims (washers stacked and then wrapped in electrical tape to hold them together)

Extra long bolts to mount my radiator on

radiator mounted

Upper coolant radiator hose made

now I just need to wait for the rest of my silicone couplers to show up and I can cut the rest of the radiator support out for my charge pipes.

ratcityrex · « **Reply #688 on:** March 19, 2015, 05:10:06 PM »

My charge pipe couplers showed up. I ordered the wrong fucking silicone 90Â° couplers that come off the turbo. Fuck!! Needed 2, 2"-2.5" 90Â° and I ordered 2"-2.25" 90Â° and other than that, all my employees are quitting at work. Have a feeling that my 2 hours a week that I have to work on the car are gone for a while.....lol fuck me!!

ratcityrex · « **Reply #689 on:** March 19, 2015, 05:58:49 PM »

And the dumb asses on ebay sent me 2" 90Â° couplers instead of 3". Well, I guess I can start mocking up my turbo manifolds. And sump my gas tank.

News:

Author Topic: NOW WITH TWIN TURBO LQ4 ACTION~~~~~~~~~~~ 1966 RAT CITY RED ROCKET!!!~~~~~~~~ (Read 155802 times)

Author Topic: NOW WITH TWIN TURBO LQ4 ACTION~~~ 1966 RAT CITY RED ROCKET!!! (Read 155802 times)