Topic: RHMT DYNO MEET WA NOW WITH POLL DATE (Read 14901 times)

d112crzy · « **Reply #60 on:** March 11, 2009, 08:17:43 PM »

hook me up with an H trans nigger.

QikEnuF · « **Reply #61 on:** March 11, 2009, 08:18:47 PM »

j.h.christ · « **Reply #62 on:** March 11, 2009, 08:20:01 PM »

holy shit

hatchboy · « **Reply #63 on:** March 11, 2009, 08:20:32 PM »

Quote from: bigdaddyvtec on March 11, 2009, 08:15:45 PM

Okay, maybe ill actually give it to you... Fuck the top bidders, obviously they coild have afforded to get one anyways.... and should have

Deal, getting in the sexpedition as we speak. Be there in two hours.

bigdaddyvtec · « **Reply #64 on:** March 11, 2009, 08:24:55 PM »

Quote from: d112crzy on March 11, 2009, 08:17:43 PM

hook me up with an H trans nigger.

That I can do, Yo have monies???

d112crzy · « **Reply #65 on:** March 11, 2009, 08:39:00 PM »

How much?

1Fast68 · « **Reply #66 on:** March 11, 2009, 11:27:27 PM »

Quote from: d112crzy on March 11, 2009, 08:39:00 PM

How much?

7.5 hookers from Pac Hwy should suffice for negotiation purposes

bigdaddyvtec · « **Reply #67 on:** March 11, 2009, 11:28:54 PM »

Quote from: d112crzy on March 11, 2009, 08:39:00 PM

How much?

say 400

ratcityrex · « **Reply #68 on:** March 12, 2009, 05:38:39 PM »

Quote from: Jordy53 on March 11, 2009, 07:02:32 PM

How about May 9th Its a saturday?

Any weekend except the 1st-3rd and the 8th-10th. Ill be in mexico getting shitty drunk bitches!!!!

d112crzy · « **Reply #69 on:** March 12, 2009, 07:59:21 PM »

Don't drink the water and unless you know it's good.

Jordy53 · « **Reply #70 on:** March 14, 2009, 08:55:49 PM »

Does anyone have a location hammered down yet?

hatchboy · « **Reply #71 on:** March 14, 2009, 09:06:55 PM »

Need location and date so i can make sure im not flying/working that day...

Random Hero · « **Reply #72 on:** March 14, 2009, 09:20:18 PM »

I'm going to speak with bob @ drift office on monday and see what deals I can pull for the end of may.

hatchboy · « **Reply #73 on:** March 14, 2009, 09:34:13 PM »

Quote from: Random Hero on March 14, 2009, 09:20:18 PM

I'm going to speak with bob @ drift office on monday and see what deals I can pull for the end of may.

damn, well i won't be there then. End of may and i will be back in the sand box. Yall better make it good, and take plenty of panty ripper vid so i have something to watch in the sand box!

losesomethinbra · « **Reply #74 on:** March 14, 2009, 10:18:04 PM »

Goddamn a dyno meet needs I need to do some more work.. Havent done shit since the last dyno

Buckaroo Banzai · « **Reply #75 on:** March 15, 2009, 05:07:00 PM »

Quote from: hatchboy on March 11, 2009, 02:54:41 AM

Anyone know how to do fiberglass?

I do, what exactly are you needing done?

bigdaddyvtec · « **Reply #76 on:** March 15, 2009, 05:08:29 PM »

Trying to button everything up today minus the DP to exhaust situation.

hatchboy · « **Reply #77 on:** March 16, 2009, 12:26:32 AM »

Quote from: Buckaroo Banzai on March 15, 2009, 05:07:00 PM

Quote from: hatchboy on March 11, 2009, 02:54:41 AM
Anyone know how to do fiberglass?

I do, what exactly are you needing done?

Just a 2 inch by 2 inch area fiberglassed onto my fender that broke off during shipping...

Quote from: bigdaddyvtec on March 15, 2009, 05:08:29 PM

Trying to button everything up today minus the DP to exhaust situation.

Pics or it didn't happen brian.

hatchboy · « **Reply #78 on:** March 16, 2009, 12:27:17 AM »

WASHINGTON(God's Country.Where HMT was founded)
1fast68 - Seattle
5thGenlx - Bellevue
70Challenger - Seattle
86crxZ6T - Mount Vernon
88dx - Bellingham
90boostedteg - Bellingham
91' LS-VTEC - Yakima
Abaz - Everett (The Creator)
D112crazy - Yakima
Ba4turbo - Auburn
Beerbongskickass - Longview
Bigdaddyvtec - West Seattle
Blacksi - Everett
Boostforlife - Kent
Buckaroo Banzai - Tacoma
Colt45 - Tacoma
Eghatch95 - Yakima
Fastspec2 - Vancouver
hatchbox90 - Tri Cities
Hatchboy - Battle Ground/Oak Harbor
Hondawagonsts - Spokane (Spocompton)
J. H. Christ - Kirkland
Jacer63 - Graham
jdmhatchracer94 - Graham
Jeffsciv23 - Yakima
Jordy53 - Oak Harbor
Kenny Rogers - Kitsap
Leed - Bellingham (Tuner Extrordinare)
Losesomethinbra - lynwood
Malichite - Port Orchard
Niko360 - Oak Harbor
Perfek360 - Longview
Random Hero - Kent
Ratcityrex - Paulsbo
Runsfromdacops - Federal Way
Ryan89crx - Pasco
Salesmonkey -
ScorpioMK - Lynwood
TurboHF - Everett
VadimkaG - Auburn

Check the fuck in for the meet/

ratcityrex · « **Reply #79 on:** March 16, 2009, 12:42:35 AM »

Do we have a date locked down yet?

Random Hero · « **Reply #80 on:** March 16, 2009, 12:59:07 AM »

I'm trying to take care of that tomorrow after work.

I can do fiberglass anything. Thats what I do everyday.

ratcityrex · « **Reply #81 on:** March 16, 2009, 01:04:06 AM »

Quote from: Random Hero on March 16, 2009, 12:59:07 AM

I'm trying to take care of that tomorrow after work.

Right on, Hope it works out and everyone showes up.

BTW, Did you get a payment from your insurance company for you shop yet? Hope you get a check that will cover your loss.

hatchboy · « **Reply #82 on:** March 16, 2009, 01:05:27 AM »

Quote from: Random Hero on March 16, 2009, 12:59:07 AM

I'm trying to take care of that tomorrow after work.

I can do fiberglass anything. Thats what I do everyday.

then help me out ya fucker.

Random Hero · « **Reply #83 on:** March 16, 2009, 01:07:50 AM »

Quote from: ratcityrex on March 16, 2009, 01:04:06 AM

Quote from: Random Hero on March 16, 2009, 12:59:07 AM
I'm trying to take care of that tomorrow after work.

Right on, Hope it works out and everyone showes up.

BTW, Did you get a payment from your insurance company for you shop yet? Hope you get a check that will cover your loss.

Got a check for the shop only, and it was about 25k under what its going to cost to rebuild it (maxed out the coverage)

They told us to get all the snap on bills and tool bills together and pictures of the trashed ones and mark down everything.

Including toolbox's its 38600 so far, and we have yet to sift through all the tools.. Our business insurance told us to not touch anything else after we got a lawyer involved, they weren't trying to cover anything.

ratcityrex · « **Reply #84 on:** March 16, 2009, 01:10:18 AM »

Man that sucks. Dealing with insurance companys and lawyers sucks. My dad is still going through fighting with the two of them over a clame thats 1 1/2 years old.

bigdaddyvtec · « **Reply #85 on:** March 16, 2009, 01:20:35 AM »

Front end back on.
Redid the fuel return from the rail to the regulator.
Bosch 044 installed, wired and plumbed.
Noggle wired to ECU for high boost goodness.
Boost solenoid wired.
Tranny filled.
New plug installed for ect sensor.
Chargepiping all done (just left it like it was Josh, I liked how it looked to... I figured out a way to get the air ratchet on the top clamp easy).
Front suspension tightened up (New lower ball joint)
Wheels back on

Just need to get the feed lline done (I need to get the back end in the air too and dont have 2 more jackstands- Just need to trim the line to length, install the tank AN fitting, clean it and final tighten), then drive the car to Marcus' for the final DP to exhaust fab. I have the 4" flex, and 4" Vbands...

You ready nig???

\

Lets do this.

Drift office sounds good.

malichite · « **Reply #86 on:** March 16, 2009, 01:23:20 AM »

Quote from: bigdaddyvtec on March 16, 2009, 01:20:35 AM

Got any better pics of this crazy ass manifold? That shit is looking good.

Random Hero · « **Reply #87 on:** March 16, 2009, 01:27:20 AM »

Looks better and you saved time

bigdaddyvtec · « **Reply #88 on:** March 16, 2009, 01:31:08 AM »

yessir

BoostForLife · « **Reply #89 on:** March 16, 2009, 01:33:03 AM »

Damn, drift office does sound good.
20minutes for me to walk there, or 5 minute drive on a car.
Hopefully my del sol will be painted and sold by then, and the ZC Crx will get boosted.
I'm down and will come to at least watch if a turbo car won't be in my possesion at that time. My brother will be down if he finishes his beastly integra by then.

News:

Poll

What date should the dyno day be

Author Topic: RHMT DYNO MEET WA NOW WITH POLL DATE (Read 14901 times)

QikEnuF

BoostForLife