Well I told u all I blew the bitch up
![Cry :'(](https://realhomemadeturbo.com/forum/Smileys/classic/cry.gif)
with a shit tone of boost and a lot of tire smoke (and no oil because of a clogged oil pickup)
Well I had the TT rods resized
New block and re filled
bored out 30 over
decked perfectly flat
micropolished crank
notched block
all new race bearing speced out for each pleace in the engine, nothing standard all precision
And friday the new custome made 9.0:1 flat top JE pistons just showed up.
The bottem end will be together this week, now I have to decide whaqt Im going to do with the head. I think it will just be a stock rebuild with new valves and springs.
[http://size=20pt]----------------------------------------------------------------------------------------------[/size]http://www.youtube.com/v/bJPg-xqyW40"
this is the sticker it came with its fucking awsome
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg204.imageshack.us%2Fimg204%2F2521%2Fdscf0022wo0.jpg&hash=14771219346ed957d7a135755f166ed0228c2bb0)
then this is the new turbo
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg205.imageshack.us%2Fimg205%2F6507%2Fdscf0014vc7.jpg&hash=b407fa6112a1daec6635a9f40b46e48556d23ef7)
and then this is the mani its going on
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg409.imageshack.us%2Fimg409%2F2407%2Fdscf0023xx2.jpg&hash=d2513188ca7b20b273db2ebafccf4b64e713f503)
:6update
ok well some up date picks here
after doing all this stuff to the bottem and I took the head into school to clean it up. After that I was looking at it a figured if I have pulled it apart to clean it I might as well do the valve seals, but If I do the valve seals I might aswell do a full valve job? So now am waiting for a head gasket kit. Acura wanted 7.86 or that a peice(X 16), fuck that. Kit off ebay comes with full head gasket set(including valve seals)for 50 shiped.
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg133.imageshack.us%2Fimg133%2F7781%2Fdscf0069if4.jpg&hash=eb383ec2a40f282c46b2eb824c27c3f386a83d91)
on top of that I was able to weld the steel to the cast housing some exspensive rods. pre-heated areas, welded, place fire blanket over after to keep the heat in. work perfect and bolted back to the turbo.
befor
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg262.imageshack.us%2Fimg262%2F5310%2Fdscf00101dx.jpg&hash=832e8180b1eaea40022f5adf4c4363b066a1727a)
after
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg133.imageshack.us%2Fimg133%2F223%2Fdscf0070qk2.jpg&hash=043975e0256646c384392fc4a0e8e0434d628411)
will make a nice mandrel 3" downpipe with the matching flange
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg261.imageshack.us%2Fimg261%2F3101%2Fdscf0073gj3.jpg&hash=96dbec22aea4aaa0b184366bebe04efddc8069d1)
and the filled block
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg132.imageshack.us%2Fimg132%2F1127%2Fdscf0072hn7.jpg&hash=6e8fddbd4c23411d6f1ef1748b69683059f6e471)
march 26 update
got my pro seal rings today aswell as my new tail lights
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg90.imageshack.us%2Fimg90%2F1135%2Fdscf0079dt6.jpg&hash=235d8bbdc81b31584320ed4e10898fcf5c29ecac)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg86.imageshack.us%2Fimg86%2F6650%2Fdscf0080hl0.jpg&hash=5a7df4a472086790e21ab7a16b66f07711b9997f)
update apr 20
engine is together now! :6
had to cut out a shit load of block and even shave the turbo to make the Mack truck turbo fit and still keep the full size rad but we did it! hopefully will have it in the car next weekend and on the street in 2 or 3 weeks
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg337.imageshack.us%2Fimg337%2F1355%2Fdsc00012vc2.jpg&hash=f45903895db806cfb048e9106dcb957898202f14)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg62.imageshack.us%2Fimg62%2F411%2Fdsc00030ec2.jpg&hash=faa12d2345397f3d070a4bb3b942a3a9216a7377)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg337.imageshack.us%2Fimg337%2F7135%2Fdsc00031sg5.jpg&hash=53fbf27273a3b8a60fae7ea33fd065b134deb777)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg62.imageshack.us%2Fimg62%2F4853%2Fdsc00027ik0.jpg&hash=13ef4dbed182cadcdfaf51d0b61f82c16fd3f97c)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg478.imageshack.us%2Fimg478%2F3121%2Fdsc00022ad0.jpg&hash=38f2e281334d0cd84a39eac9c0fc2eb7f86bf103)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg337.imageshack.us%2Fimg337%2F2813%2Fdsc00021ms4.jpg&hash=f97d72261c84daaf0007be69af01d1b006689e64)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg389.imageshack.us%2Fimg389%2F3531%2Fdsc00015hv0.jpg&hash=4d1151648c0458f92e64b09602d2494822273e3c)
update apr 29Well we went to install the engine today and had nothing but problems.
Joe started and ended the day doing the body work, hed did a realy good job so far.
me, WOT, Rishis, josh went towork on the engine. got the cluctch setup in, its so tight its bending the bracket its atached to. tranny on and we got the coilovers in, engine n but not finished. it was a pretty good day all and all.
at around 6pm I figured all the guy had worked there ass's off all day and where happy to do it so it was time for a brake. we hit up thease hardcore twisty roads, a good 40min drive through 40km turns at 120 in the 2 crx's and the sir hatchback. after a nice cruz through there WOT got into it with a built Type R(N/A built) and just wooped his ass. the guy was thinking WOT had a "K20 swap" but must off been put to shame finding out that it was just a b16a1.
heres some pics
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg403.imageshack.us%2Fimg403%2F628%2Fdscf0087ee5.jpg&hash=b9e10221c8f67f4306ed61591b9ad34ebbd47726)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg82.imageshack.us%2Fimg82%2F9555%2Fdscf0093gg0.jpg&hash=accfd9311d69431d050eb8dd6c795f0bb313c5bf)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg402.imageshack.us%2Fimg402%2F2176%2Fdscf0094jb9.jpg&hash=b3be30b88157e3537ec4fa8fc483e4a03aa7a7fc)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg168.imageshack.us%2Fimg168%2F7042%2Fdscf0095rs1.jpg&hash=866d0e0a486c04b18c985454eceecb801b7447dc)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg168.imageshack.us%2Fimg168%2F2498%2Fdscf0098ef2.jpg&hash=628bc277729181f5641a5934e993b0135dd969f3)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg82.imageshack.us%2Fimg82%2F3048%2Fdscf0100zk6.jpg&hash=4e9dab3ec77f7f0f1cfb0bc086533ef109e1016f)
and the end of the day
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg82.imageshack.us%2Fimg82%2F3527%2Fdscf0099zy7.jpg&hash=b9042c924c1a756b22f884eda9a354fa6686b5e5)
Thanks guys you all helped a lot
update july 7well this is the problem
I never told anyone but I striped on of the head bolts in my build
![Cry :'(](https://realhomemadeturbo.com/forum/Smileys/classic/cry.gif)
I said fuck it Iv gone this far this bitch is gonna run, and she did just fine, untill I hit 11.5psi and the head gasket let go right where that bolt goes. so I pulled the head off and put in a helicoil and shes ready to go back together.
I seen one on ebay for 90+20 shipping to canada but dont know if it will be here in time or if I should just do a copper spray again? guess I have no choice but to do the copper spray again
JULY 17 2007Well she was running and I did get a video of her running but its not the greatest
(Will be here soon/today)
I already changed the head gasket and put in 10 1/2" grade 11 capscrews to hold the head down and also uped the head TQ to 60ft/lbs from 47
all I have to do now is new plugs and re set the timming, and put the doors on and paint the bitch
here is the wastegate, just came in today
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg401.imageshack.us%2Fimg401%2F4568%2Fdscf0003is6.jpg&hash=fe5e9aaeab2a2e0aab55f933439a082099ae54ad)
Just got the internal back from the shop today
TT rods with a mad hook up from creig
JE forged pistons
held together with B series larger wrist pins
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg92.imageshack.us%2Fimg92%2F8098%2Fdscf0004hr1.jpg&hash=fa29e039bdfc9db04e20e8510417a86974ba8352)
well here is a couple of new pics, still waiting on snap on for the cyl honer so I can put the shit together.
(still have to do all the head work that y its ugly still)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg162.imageshack.us%2Fimg162%2F4060%2Fdscf00129rs.jpg&hash=aa4a07f14a76ad64ec7fd23e5ef807ddf1a27229)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg262.imageshack.us%2Fimg262%2F5310%2Fdscf00101dx.jpg&hash=832e8180b1eaea40022f5adf4c4363b066a1727a)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg261.imageshack.us%2Fimg261%2F3381%2Fdscf00162zc.jpg&hash=03a77ff592725d5e2366564cc2f7ae5c9f360e62)
]
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg106.imageshack.us%2Fimg106%2F9885%2Fdscf00126ij.jpg&hash=c5fee7414f3afbdd2a8045882795bfb7a44a096a)
[/
Well this weekend killer D spent yet another day fine tuning my baby. I guess after we got his turbo kit up and running he felt like giving back.
The Engine will be finished by this friday now(not the one in the pic)
The tranny is at the tranny shop for a full rebuild(all oem parts), and the new High speed/good gas milage on highway 5th gear.
fender is pretty mutch finished, the drv door is almost finished aswell
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg247.imageshack.us%2Fimg247%2F7125%2Fdsc00143fj7.jpg&hash=ce410d7fd7abd9296e34466c7d966aa521c3010e)
drv side Q panel is finished
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg132.imageshack.us%2Fimg132%2F4778%2Fdsc00144ui4.jpg&hash=262002123edc113d9b4f727e5e4c54416d3a2e98)
antenna and roof lines shaved
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg441.imageshack.us%2Fimg441%2F9217%2Fdsc00145ly4.jpg&hash=df9066f9752dd1aa9043ddc0b237cc78d7d36dd8)
rears all cleaned up, spoiler mounts still there(I love my rice)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg247.imageshack.us%2Fimg247%2F8425%2Fdsc00146pa9.jpg&hash=a5f1e09d1735cff850ac269ac3a7baabd1932a26)
and the money shot
once again, my car with no engine in it
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg247.imageshack.us%2Fimg247%2F6315%2Fdsc00147lc4.jpg&hash=976a44a9cf02d8b21b18b3a319cd0656fefb0469)
Sunday has come and gone
We left hamilton @ 6:30 to head up north to the car, We worked our ass's off a;; day
Joe and Joe have finished off the body work acept for a full car 320grit sand be for primer next weekend.
Rishi and I got the tranny/Engine setup built and installed and started to install the turbo setup aswell.
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg144.imageshack.us%2Fimg144%2F2193%2Fp1000284vu9.jpg&hash=7fb437ef7c492ea29568ed77ac05306fd0a59594)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg144.imageshack.us%2Fimg144%2F4090%2Fp1000285gx5.jpg&hash=fe0efdb9e28e02cb36353e46868762e0eb3a0880)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg525.imageshack.us%2Fimg525%2F1382%2Fp1000286av3.jpg&hash=2f40bccef5e932aeeb6f295f4774f7b579fb36e7)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg144.imageshack.us%2Fimg144%2F3110%2Fp1000290qt2.jpg&hash=449c5bc9c59e22c95f5077ae230abdc56e7ef1a0)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg525.imageshack.us%2Fimg525%2F4673%2Fp1000291gp0.jpg&hash=b2ffa41271dd0b8bd821866bdc14876e7468f794)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg525.imageshack.us%2Fimg525%2F2064%2Fp1000292vn0.jpg&hash=5b61a16ae7c26c62170a3fd401ce87f74f1adbda)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg340.imageshack.us%2Fimg340%2F7056%2Fp1000293sp9.jpg&hash=b4d6fa0a6fb09c802f384c22ff118816f0317bbc)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg144.imageshack.us%2Fimg144%2F3018%2Fp1000294uy5.jpg&hash=b2067ec628e76137f1d7c0da4bbac11d4bde566f)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg525.imageshack.us%2Fimg525%2F4310%2Fp1000301ga6.jpg&hash=5b0093a3d5ce2160dd344f364f71b3ab082a4ffe)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg340.imageshack.us%2Fimg340%2F5395%2Fp1000288xr4.jpg&hash=dbfbd4c5a1e3807f2e5c06e9f548bf5187b5ded0)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg340.imageshack.us%2Fimg340%2F6980%2Fp1000299oh8.jpg&hash=0968fae76a656846ac687922fc5b897f7bdcd2a6)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg144.imageshack.us%2Fimg144%2F1218%2Fp1000298mf4.jpg&hash=65c5226edccc2b0618dbf3fd8b41e09d81d7d851)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg525.imageshack.us%2Fimg525%2F351%2Fp1000297sc1.jpg&hash=8ca14616392e43651a0bb9a0d4d26e159099e138)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg525.imageshack.us%2Fimg525%2F2576%2Fp1000296uo2.jpg&hash=06e0c095aeeb176f2d0f835b0220f4f28f6d69c1)
![](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg340.imageshack.us%2Fimg340%2F8048%2Fp1000300ko6.jpg&hash=0d0630bb3d81ded26547b2af25973c6cf3d959ca)