:::RHMT::: Real Home Made Turbo

General Category => Forced Induction => Topic started by: 4door89 on June 05, 2012, 08:33:26 PM

Title: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 4door89 on June 05, 2012, 08:33:26 PM: I'm doing a custom turbo location in me EF and need a manifold made to order.

I'm looking for quality work, and willing to pay for it.

Pics of the setup...

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff11%2Fjclaudio81%2FThe%2520Ron%2520Burgundy%2520Civic%2FIMAG0192.jpg&hash=340280e6535943539e8c4d2abd9dc3b536f3f6e3)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff11%2Fjclaudio81%2FThe%2520Ron%2520Burgundy%2520Civic%2FIMAG0196.jpg&hash=68b8ef2823b248d7f50d15bf5e22b8aab8934567)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff11%2Fjclaudio81%2FThe%2520Ron%2520Burgundy%2520Civic%2FIMAG0204.jpg&hash=f3dd61e9d1ab1e3f7977782297be8b3423363561)
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: Ntrain2k on June 05, 2012, 08:41:18 PM: http://www.realhomemadeturbo.com/forum/index.php/topic,25.0.html (http://www.realhomemadeturbo.com/forum/index.php/topic,25.0.html)

Look there, learn, follow example.

You might get some advice then.
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 4door89 on June 05, 2012, 09:00:22 PM: Sorry, i forgot guys...

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fp2.junkysex.com%2Fthumbs%2F1%2F0753%2F1225664_1.jpg&hash=138dab15c6e1de74aea049b4233d2d6d061a144a)
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 4door89 on June 05, 2012, 09:02:08 PM: I was on this site years ago.

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fp2.junkysex.com%2Fthumbs%2F1%2F0371%2F15027_1.jpg&hash=1173665037ca4ec10c7495440f28491bde25aaac)
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 4door89 on June 05, 2012, 09:14:33 PM: (https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff11%2Fjclaudio81%2FThe%2520Ron%2520Burgundy%2520Civic%2FIMAG0190.jpg&hash=5e3998ca9310fba3722eca8a00013aafee019409)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff11%2Fjclaudio81%2FThe%2520Ron%2520Burgundy%2520Civic%2FIMAG0194.jpg&hash=262477bcdacb9b52b7cb40725c23d84d33bf732d)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff11%2Fjclaudio81%2FThe%2520Ron%2520Burgundy%2520Civic%2FIMAG0199.jpg&hash=c68d951677dc39de2a91646581c49ae002a19d27)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff11%2Fjclaudio81%2FThe%2520Ron%2520Burgundy%2520Civic%2FIMAG0213.jpg&hash=aaf9c835f1dbea6e335535f553a3ecf8ea0bdc75)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff11%2Fjclaudio81%2FThe%2520Ron%2520Burgundy%2520Civic%2FIMAG0228.jpg&hash=6afec267f6f28c095e020f001fc54de626c4cc3e)
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: rawr on June 05, 2012, 10:14:58 PM: I see why you might want your turbo there to make your charge pipe routing easier, but that seems like it would turn the manifold into a mess.

Short ram ftw?

Also normal porn pls.
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: malichite on June 05, 2012, 11:08:51 PM: Thats a cute little turbo. Why the cluster fuck "custom" shit to get that little thing all the way down there? Your lack of porn upsets me by the way! One fat chicks tits porn do not equal.
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: crxvtec91 on June 06, 2012, 09:37:36 AM: CoryR and Csaddict are the CT fab nogs, BUT i havent seen coryR post in forever and David doesnt do to much fab work now a days.
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 92CXyD on June 06, 2012, 09:48:09 AM: Quote from: crxvtec91 on June 06, 2012, 09:37:36 AM
CoryR and Csaddict are the CT fab nogs, BUT i havent seen coryR post in forever and David doesnt do to much fab work now a days.

Hotrex is another in your area :noel:
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 4door89 on June 06, 2012, 08:35:42 PM: Quote from: malichite on June 05, 2012, 11:08:51 PM
Thats a cute little turbo. Why the cluster fuck "custom" shit to get that little thing all the way down there? Your lack of porn upsets me by the way! One fat chicks tits porn do not equal.

Long story short, I'm an asshole and thought a custom radiator and support would be a cool idea.

That turbo should be good for a reliable 400+ and that's what I'm looking for out of this setup.

And please excuse my selection of porn. I was high as fuck when I posted and thought it would be funny. I apologize for my crimes against humanity.
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: dvst8r on June 06, 2012, 09:48:37 PM: PM hotrex, he should have something for you.
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: malichite on June 06, 2012, 09:50:36 PM: That is a pretty slick radiator. What did it come from?
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 4door89 on June 06, 2012, 10:05:56 PM: It's a volks scirocco core with custom endtanks. Dual pass
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: DasPoop on June 07, 2012, 12:20:58 AM: i vote hf manifold with a drop pipe. with all the setups on this site you cant think of anything? seriously now i mean we have such fine manifolds as this(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi700.photobucket.com%2Falbums%2Fww3%2Fih8rice%2FP1020335.jpg&hash=3686629e63d05ddfd5dd3ddcbdb205476614b53f)
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 4door89 on June 07, 2012, 12:51:50 AM: Ha. Dat vas un good von.

I'm looking for something just a little classier than that fine piece right there...
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: jdmhatchracer94 on June 07, 2012, 01:42:23 AM: This is rhmt we dont do fuckin classy. We do cheap and dirty thats what gets it done.
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: turbob16hatch on June 07, 2012, 01:51:06 AM: $250 buy it

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi71.photobucket.com%2Falbums%2Fi123%2Fmattgroshong%2FIMG_20110823_223809.jpg&hash=020cb3de155ed1a910b80a31a65cb13982b5a8b1)
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: ryan89crx on June 07, 2012, 02:31:47 PM: Quote from: jdmhatchracer94 on June 07, 2012, 01:42:23 AM
This is rhmt we dont do fuckin classy. We do cheap and dirty thats what gets it done.
A lot of people have forgotten HMT's roots :-X
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: rawr on June 07, 2012, 05:08:52 PM: Quote from: turbob16hatch on June 07, 2012, 01:51:06 AM
$250 buy it

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi71.photobucket.com%2Falbums%2Fi123%2Fmattgroshong%2FIMG_20110823_223809.jpg&hash=020cb3de155ed1a910b80a31a65cb13982b5a8b1)

worth it for 250 then do something else with your rad setup
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 4door89 on June 07, 2012, 09:59:12 PM: I need something like this...

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi31.photobucket.com%2Falbums%2Fc351%2Fresponse916%2Fturboheader103.jpg&hash=df050a2943fee8ba38a39a2b21acde83db4e7df2)

Its getting to the point that I'm about to start buying some pipe... My only concern is time/material wasted. I need to stop being a pussy...

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fthesexreports.files.wordpress.com%2F2012%2F04%2Fteen-pussy.jpg&hash=db124e2edd6e11129758b9f9970a94dac4a961b1)

WOW that's got a clean shave!!!
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 4door89 on June 07, 2012, 10:05:41 PM: Quote from: ryan89crx on June 07, 2012, 02:31:47 PM
Quote from: jdmhatchracer94 on June 07, 2012, 01:42:23 AM
This is rhmt we dont do fuckin classy. We do cheap and dirty thats what gets it done.
A lot of people have forgotten HMT's roots :-X

I did cheap and dirty already...

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff11%2Fjclaudio81%2FThe%2520Ron%2520Burgundy%2520Civic%2F0317091519.jpg&hash=488b77ec5ec5ea23176d3fc09402fdf34f091e1a)

I'm trying to be like the Jeffersons...

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fkastatic.com%2Fi2%2Ftv%2F5887.jpg&hash=c606d4532a1e585bceaff9f435c811e529361645)

I'm moving on up bitches...
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: NoPistons! on June 12, 2012, 01:12:24 PM: Because that manifold is really going to help that small as fuck turbo all legit like?

Buy a mig and some weld els and go for it. Hobart 140 or something. China freight if you're a cheap fuck like i am. Trust me, you will FIND shit to weld with it thus making it pay for itself in no time.
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 4door89 on June 12, 2012, 01:46:22 PM: (https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff11%2Fjclaudio81%2FIMAG0243.jpg&hash=b6fd2f7a14f557f553985b7bea0c92a7f74039a5)

The welder is not the problem. This is what I have at home now. I'm the kind of guy that knows when he should bring in experience. Experience = Quality work. To go through all the cost of material, to have it wasted on a stupid rookie mistake on my part is a risk I don't want to take right now.

I've done exhausts and downpipes before with plenty of popcorn for all to enjoy. I want something better for the manifold.
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: crxvtec91 on June 12, 2012, 02:35:39 PM: You can do as I did, tack weld what you need and get it finish welded by someone else.
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 4door89 on June 12, 2012, 02:54:06 PM: Ok so I'm gonna buy some sch10 SS els from ace...

Maybe BMC for flanges? I know there's beef...
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: rawr on June 12, 2012, 06:32:44 PM: just buy mild steel
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 4door89 on June 12, 2012, 06:39:29 PM: It's cheaper to do SS.
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: rawr on June 12, 2012, 07:04:43 PM: It is but mild is way fuckin easier to weld
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: turbob16hatch on June 12, 2012, 09:28:14 PM: Less posting more welding. we don't care what you make shit out of or where you buy the material.

btw, you do realize there are like 50 places that make manifold for hondas right?
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 4door89 on June 12, 2012, 09:39:12 PM: What filler rod would you guys use to weld a mild flange to 304?
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: turbob16hatch on June 12, 2012, 10:25:35 PM: google?
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: rawr on June 12, 2012, 11:37:55 PM: er304 you can use pretty much anything, though. 316 is too wet and flows too quick if you're slow as fuck like me.
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: malichite on June 12, 2012, 11:44:16 PM: 308L
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: The_Beave on June 13, 2012, 12:08:27 AM: 309 to weld mild to 308 or 304 stainless.

You can also use 316, but that is REALLY expensive.
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 4door89 on June 13, 2012, 12:37:44 AM: A lot of dudes are sucking 309L's dick on this site...

http://cr4.globalspec.com/thread/6367 (http://cr4.globalspec.com/thread/6367)

309 it is...

I have stainless wire in my lincoln right now...

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pussy-1.com%2Fwp-content%2Fuploads%2F2009%2F03%2Fpussy-licking.jpg&hash=b561ef7557add30d69332b1decdfe8fae18c990c)
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 4door89 on June 13, 2012, 02:38:45 AM: http://www.airgas.com/browse/productDetail.aspx?Category=248&product=AVE59192 (http://www.airgas.com/browse/productDetail.aspx?Category=248&product=AVE59192)
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 92CXyD on June 13, 2012, 09:42:18 AM: Quote from: The_Beave on June 13, 2012, 12:08:27 AM
309 to weld mild to 308 or 304 stainless.

You can also use 316, but that is REALLY expensive.

Too bad the foundry I work at pours 316 and 316l once/2wks right now, I want to try and make a pattern and corebox to make manifolds.
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 4door89 on June 13, 2012, 01:39:56 PM: What type of shapes and sizes do you guys make? Everything?
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 92CXyD on June 13, 2012, 01:42:57 PM: Quote from: 4door89 on June 13, 2012, 01:39:56 PM
What type of shapes and sizes do you guys make? Everything?

We pour casting, usually 4" to 16" turbine pump impellers, and some bodies and volutes.

We are a brass/bronze foundry but we are getting major customer demand for 316L/316 castings. :noel:
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: DasPoop on June 13, 2012, 09:50:38 PM: russ you know you have to make a killer ballin brass or bronze compressor housing :P
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 92CXyD on June 13, 2012, 09:59:33 PM: Quote from: DasPoop on June 13, 2012, 09:50:38 PM
russ you know you have to make a killer ballin brass or bronze compressor housing :P

Yeah but it will weight twice the aluminum comprossor, unless I do a CDA958 then it will be a little closer aluminum. :noel:
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 4door89 on June 13, 2012, 10:27:51 PM: I'd buy that for a dollar!
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: rawr on June 13, 2012, 11:44:30 PM: Quote from: 4door89 on June 13, 2012, 12:37:44 AM
A lot of dudes are sucking 309L's dick on this site...

http://cr4.globalspec.com/thread/6367 (http://cr4.globalspec.com/thread/6367)

309 it is...

I have stainless wire in my lincoln right now...

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pussy-1.com%2Fwp-content%2Fuploads%2F2009%2F03%2Fpussy-licking.jpg&hash=b561ef7557add30d69332b1decdfe8fae18c990c)

That site is filled with durkas who appear to be engineers.

Never trust a durka, never listen to an engineer.
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 4door89 on June 13, 2012, 11:56:30 PM: (https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.aljazeera.net%2Fmritems%2Fimages%2F2005%2F5%2F9%2F1_539522_1_34.jpg&hash=c5eb3bd3d362586090618fc5ad06d6644cd3ae54)
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 4door89 on June 17, 2012, 01:40:04 PM: Looks like Corey is going to be doing my manifold. Hes got a couple more projects to bang out then I'm up. Cant wait for that shit be done.

Now my only question is, how high compression am I going to do on stock sleeves/bore with pistons and rods.

My goal is 350hp.

Stock B16 Head, ITR cams, 70mm TB, port matched skunk2 IM, 650cc Precision injectors

T3_T4E-Standard Bearing- H61 compressor wheel- Dry- Dynamic- Stage 5 turbine wheel- Standard .63 a/r turbine housing

I'm going to try to build boost as soon as possible. And I would like a power band with emphasis on low-mid range.

I know what "GOOGLE" says, I am simply thinking out loud...
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: malichite on June 18, 2012, 07:45:05 AM: Quote from: The_Beave on June 13, 2012, 12:08:27 AM
309 to weld mild to 308 or 304 stainless.

You can also use 316, but that is REALLY expensive.
Meant 308. Been a while sense I was welding in the garage. 308 is all I run.
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 4door89 on June 18, 2012, 06:52:19 PM: Wait i thought 309 was preferred for mild to stainless.

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff11%2Fjclaudio81%2FIMG00037-20090901-1200.jpg&hash=557d3747f1679e04f1031b422e9c7b0f811005b7)
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 4door89 on June 18, 2012, 09:00:35 PM: T3 blanket from siliconeintakes.com $50

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff11%2Fjclaudio81%2FThe%2520Ron%2520Burgundy%2520Civic%2FIMAG0613.jpg&hash=1f7bebcf7c08433364def151afedc73e7003ee46)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff11%2Fjclaudio81%2FThe%2520Ron%2520Burgundy%2520Civic%2FIMAG0614.jpg&hash=279d55fafe48879c863a4f6d8b0e3bd0299ec246)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff11%2Fjclaudio81%2FThe%2520Ron%2520Burgundy%2520Civic%2FIMAG0615.jpg&hash=dd21c76df804d5b4310641f1adead5d583571810)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff11%2Fjclaudio81%2FThe%2520Ron%2520Burgundy%2520Civic%2FIMAG0616.jpg&hash=2328f0cd3b4c77338634a436806ee28575b3de62)
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: turbob16hatch on June 21, 2012, 12:50:17 AM: Quote from: 4door89 on June 17, 2012, 01:40:04 PM
Looks like Corey is going to be doing my manifold. Hes got a couple more projects to bang out then I'm up. Cant wait for that shit be done.

Now my only question is, how high compression am I going to do on stock sleeves/bore with pistons and rods.

My goal is 350hp.

Stock B16 Head, ITR cams, 70mm TB, port matched skunk2 IM, 650cc Precision injectors

T3_T4E-Standard Bearing- H61 compressor wheel- Dry- Dynamic- Stage 5 turbine wheel- Standard .63 a/r turbine housing

I'm going to try to build boost as soon as possible. And I would like a power band with emphasis on low-mid range.

I know what "GOOGLE" says, I am simply thinking out loud...

low-mid range with a 61mm stg 5 .63 turbine. on a b series. hahahahahahaha Really dude? You ever been in a turbo b series car?

Seriously you need to take a big look at your plan and change everything about it. You just wrote out a recipe for a power band from 6000-9000 rpm. efficient cam, efficient intake/tb, efficient turbine. who in the hell gave these as suggestions?
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 4door89 on June 21, 2012, 09:34:43 AM: is the turbine too big? Even with 10:1 or 10.5:1???
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: ratcityrex on June 21, 2012, 01:23:41 PM: If your only going for 350 and semi quick spool I would have tried to go with a simple 50 or 57 trim.
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 4door89 on June 21, 2012, 01:42:22 PM: That's what I've had forever. Trying to use what i already own. I also want some room for more down the road.

Oh well.

I might be getting a STR intake manifold for $250 for my built GSR head.
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: rawr on June 22, 2012, 04:39:02 PM: The powers going to hit you in the face. It should be fun.
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 4door89 on June 27, 2012, 02:37:42 AM: Some pics of the old setup...

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff11%2Fjclaudio81%2FThe%2520Ron%2520Burgundy%2520Civic%2FIMG_2304.jpg&hash=5b27a1181c547dcdd02592d84fc24c9c3aff9b45)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff11%2Fjclaudio81%2FThe%2520Ron%2520Burgundy%2520Civic%2FIMG_2305.jpg&hash=acb3398cb8c76df499c1ccd47c5700a992f77a95)

So one night, i think i was high... I decided to extend my dump out passed my oil pan.

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff11%2Fjclaudio81%2FThe%2520Ron%2520Burgundy%2520Civic%2FIMG_2301.jpg&hash=4788358ad77f7cb2bdaf791d7c97f531be80eb21)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff11%2Fjclaudio81%2FThe%2520Ron%2520Burgundy%2520Civic%2FIMG_2299.jpg&hash=473a09fe790a889f8fcab3ee8126814200955fbc)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff11%2Fjclaudio81%2FThe%2520Ron%2520Burgundy%2520Civic%2FIMG_2298.jpg&hash=ab74d46b744ff96042625e908967e6053f43ca00)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff11%2Fjclaudio81%2FThe%2520Ron%2520Burgundy%2520Civic%2FIMG_2300.jpg&hash=a9139cdff7b20d4e7c0065d2c1fc679114bcf033)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff11%2Fjclaudio81%2FThe%2520Ron%2520Burgundy%2520Civic%2FIMG_2309.jpg&hash=6a1f95ed68640939e8551f2110ed2423fe169f86)

Only problem is, it only lasted about 2 weeks. I guess with all the weight, that bitch broke from the weld on the wastegate flange.

Scarlett Johansson is a whore!!!

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fmikesneed.files.wordpress.com%2F2011%2F09%2Fscarlett-johansson-naked-pictures-01-2011-09-14.jpg&hash=e3377b8eb7631929dab724220756b37e02d8e1d5)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2F4.bp.blogspot.com%2F-AZd8suldMyk%2FTnZpNkNqB5I%2FAAAAAAAAAVc%2FTGJNjs4YyZo%2Fs1600%2Fscarlett_johansson_naked_leaked_nudes_2.jpg&hash=5fdf0b4f360e47e6a49c3e5c1be7247816ce2942)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fdk3rv6hblwrlz.cloudfront.net%2Fwp-content%2Fimages%2Fscarlett_johansson_ass.jpg&hash=29757e8c64c3673498878a0b8c5a058f110607f8)
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: HiProfile on July 01, 2012, 12:00:40 AM: BLOX log manifold, two t3 flanges, two 45* elbows (aluminized steel tube). Run the outlet of the manifold down & over to the turbo and enjoy.
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: d-rail on July 06, 2012, 10:54:44 AM: I didn't feel like reading your whole post but get ahold of eville. He does baller shit at a crazy price. He's like a cheaper whore without the payback and with customer service.
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: ratcityrex on July 06, 2012, 02:49:49 PM: Quote from: d-rail on July 06, 2012, 10:54:44 AM
I didn't feel like reading your whole post but get ahold of eville. He does baller shit at a crazy price. He's like a cheaper whore without the payback and with customer service.

TRUTH!! Rocked out a splog for me for dirty cheap!
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: 4door89 on July 09, 2013, 12:33:42 AM: I went a completely different route.

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi44.photobucket.com%2Falbums%2Ff11%2Fjclaudio81%2F20130708_221500_zps52d6e998.jpg&hash=1bb58b8d82685ec9e96927bcbe3b52a2d88a30c0)
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: ratcityrex on July 09, 2013, 12:44:39 AM: Kinda reminds me of spikers old mani
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: HiProfile on July 10, 2013, 12:56:19 AM: Even the car color...except with less homo. ;DDD
Title: Re: I need a custom manifold in CONNECTICUT! civic EF!!!
Post by: Joseph Davis on July 10, 2013, 10:49:13 AM: Why you'd seek out that spaghetti mess without pairing the cylinders is beyond me.