:::RHMT::: Real Home Made Turbo

General Category => General Discussion => Topic started by: 7808 on October 25, 2015, 03:28:10 AM

Title: would a HF winch work as a hoist
Post by: 7808 on October 25, 2015, 03:28:10 AM

i know hf sells a 120v hoist, but i was there recently and the "2500lb atv winch" was on sale for 59. i think it might be 49 soon. i picked one up and a 20$ 225cca mower battery which i was planning on hooking up to a charger or somthing. i might still return it but i was thinking i could either mount it to my garage wall to yank dead cars in , and with a pulley or snatch to a beam across the the rafter and use it as a lift, or mount it up in the rafter as a engine lift. i figured i could also weld up a trailer hitch mount and use it that way too, if i ever needed it portable. which i probably wouldnt. but i have used my car several times to yank people out of snow or rip out fugly landscaping.

i thought of using it to lower down a home furnace i got into my rafters but it was a real whore. and then keep it around because i recenty gave the cherry picker back to a neighbor.

would this work for this stuff? it has a wireless remote with in/out buttons. im not sure how the whole release works, if it has a brake or will hold a load mid air or not. obviously i wouldnt trust it to climb under it holding somthing .

Title: Re: would a HF winch work as a hoist
Post by: HiProfile on October 31, 2015, 01:12:32 PM

If the winch has some sort of a brake or power reverse, it should work. W/o a brake it will work as long as it it's reeling in. I had the plastic-cased winch from Northern pull a dead prelude onto a trailer no issue, and that was with a crappy car battery that I bought reconditioned while in sub-zero temps.

I can't say it will dead-lift 2500lb, but it should lift more than you can. The down side to most electrical hoists is when they're on/off controls. It's like trying to drive a finish nail with tractor-trailer.

Title: Re: would a HF winch work as a hoist
Post by: 7808 on November 01, 2015, 02:54:39 AM

i can push a 3000lb car by my self on flat ground, so i figured this thing can dead lift about 3-400lbs maybe lol. ill give it the benefit of a doubt it can lift more than me if its made to pull a atv out of mud or whatever

Title: Re: would a HF winch work as a hoist
Post by: HiProfile on November 08, 2015, 04:16:49 PM

3 ppl weren't enough to push a prelude up onto the trailer but the cheap winch did it, albeit slowly. Mine is probably the weakest model too.