Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Lowerit]

this is what dreams are made of.

[92CXyD]

I see problem with welds.

Great looking exhaust there and it is cheap and I like cheap. ;D :yes: Jew

[ratcityrex]

I see problem with welds.

Whats wrong with them?

[88dx]

I see problem with welds.

Whats wrong with them?

No flux birdshit 

[ratcityrex]

I see problem with welds.

Whats wrong with them?

No flux birdshit 

did you not see that I welded the alel back? Here you go, here is your bird shit slug trails

[92CXyD]

I see problem with welds.

Great looking exhaust there and it is cheap and I like cheap. ;D :yes: Jew

Dude my engrish sux.

 I meant I do not see problems with the welds.   ;D

[d112crzy]

That shits way too clean for flux. Fail.


:p

[Urban Indian]

I dont know how loud it will be with just the resonator, but I have a feeling that sometime this summer I will be picking up a magnaflow and having new exhaust welded up from the axel flange back because I dont realy like how it turned out. Might end up stuffing another resonator instead of the magnaflow behind the axel.

My car has just the one muffler. I had some Dynamax Bullits but they were not SS and Dave wouldnt weld them on it......... But all in all I like the way it sounds.


I like your exhaust, not a big fan on the way it turns down. Reminds me of that fat speed factory Kid and his crazy uber JDM pump gas car



Keep it up nigger

[ratcityrex]

and having new exhaust welded up from the axle flange back because I dont realy like how it turned out.

I like your exhaust, not a big fan on the way it turns down.

Im not a huge fan of the way it turned out ether. From the axle back that is. Must be because I was just using left over parts and pieces to make it. I think the side exit through the rear bumper is where its gona be done. I hate how the crx's have the muffler that runs all the way across the back and then exits on the other side of the car. And Im not gona do some stupid ass staight pipe from the rear axle over to the other side of the car at a 45* angle. It looks like brown rice every time I see that done!! CHING CHONG MEOW!!

[Urban Indian]

I seen that.



I agree regaurdless

[glustic]

He did alot better job than that shop could ever do. Fuck there $200  bullshit

[ratcityrex]

Well today was a good day. Got most of the last few things done. Got my exhaust from ryan on sat. Looks bitchen by the way. Then today I re-did the wg dump tube because the one I had was hitting the downpipe, and it had been cut and reused about 4 times so the pipe had all kinds of cuts and welds.....lol

So here is the new one, Im gona just call this one the snake..............






But it fits good.






I cut about 3/16" off of each downpipe bolt so it wouldent bottom out in the turbo. I fitted up my feed line to see how I was gona run my feed.

So tomorrow im gona bolt up my turbo and my exhaust and run my hot side chargepipe, disconect the line to my pcv valve coming from my black box and cap it, then run a t from my intake run a vac line to my bov and my wg. Then I need to burn a new chip and set my boost cut at 1.5lbs untill I get my catch can and my baffles set up for my valve cove.

[glustic]

Sick ass shit!!!!

[bigdaddyvtec]

I sense the Nog is strong with this one

[malichite]

I love your snake, errrr. nice pipe, fuck no way to say it without sounding gay.  Looks Hot!!!!

[ratcityrex]

YOU fag!!!    :yes: Stay away from it. The last thing I want to do is catch you messing with my snake!!

[glustic]

YOU fag!!!    :yes: Stay away from it. The last thing I want to do is catch you messing with my snake!!

You would like it AJ don't deny it

[ratcityrex]

It runs!!!!! Well kind of. Boost control is with my right foot due to the wg not having a line ran to it, and the bov dosent work eather, because it to dosent have a line ran to it. And air filters??? Who needs them, Not me because mine dosent fit....lol So the plan for tomorrow is to get some RIGHT sized t's and run vac lines to my wg, and bov. The Im gona get some window screen to put over my inlet for the time being, Untill I can get the right silcone bend to make my air filter work. And boy the exhaust is real thumpy with the deltas and 3" with no muffler! 

[jdmhatchracer94]

why wait homedepot open till 11pm get that shit done

[fishinfool88]

I see what you did there, and I like it.

[ratcityrex]

why wait homedepot open till 11pm get that shit done

Only open untill 10 up here, and fuck that Im spent after busting ass all afternoon in the garage. I had an elivated heart beat all afternoon in the garage. I was running from one side to the other just trying to bust this out today and not skimp/cut corners(and im fucking fat). Got it most of the way done, enugh to drive to work tomorrow anyways.

I see what you did there, and I like it.

and whats that?

[ApexSilver06MR]

im still waiting 4 a call back

[ratcityrex]

I called and you let me go to voicemail  Ill call you tomorrow nig!

[chris]

Hell yeah ;D.

[malichite]

Lets go get some rippers!!!! 

[Teg2boo]

Lets go get some rippers!!!! 

this!

[Joseph Davis]

Boost control is with my right foot due to the wg not having a line ran to it

AWARD THIS MAN ONE INTERNET

[crxvtec91]

Love the full size rad!

[ratcityrex]

Lets go get some rippers!!!! 

this!

One the roads dry up and Ive gotten all the little shit done I will!

[Teg2boo]

Lets go get some rippers!!!! 

this!

One the roads dry up and Ive gotten all the little shit done I will!

Yeah, be careful on wet road cause b18+10psi and dirty 4th = spinning tire at 120km/h

Winter tires don't help too