:::RHMT::: Real Home Made Turbo
General Category => Forced Induction => Topic started by: Towdogg on March 11, 2009, 01:08:26 AM
-
This is my ride!
94 EX
Z6 block and head
75mm Vitaras and Tuner Toys rods
Acl bearings
All new seals
Napa oil and water pump
Stock head
Evansperformance .57 trim turbo
.063 reducer for oil feed
Steel braided oil lines
Ex/Si tranny
Junk XTD clutch
Crome Street tuned by illpooh (SOON)
440cc injectors
2.5bar moto mapp
CDM wastegate
CDM mani
2.5 Charge pipes that need redoing
2.5 Full exhaust
I am sure that I am forgetting something! :(
What kind of power should I be making with this set up? (Need bigger injectors)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2FGodlovesHMT007.jpg&hash=aa94720c2e6b850bfc7ea7f12caf9a834e83a93f)
This picture has the small turbo still....
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2FDaily003.jpg&hash=1a59a650cbb1ca38ab6f723056e4c8b6c1158037)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2FEFEG010.jpg&hash=0c4ced0a922e855ada6ac0a09fc1395f8a4d1dfc)
Posted up with Rosarios Old hatch
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2Fls006.jpg&hash=17bcb95d344d2c6a742e164e9f5d2cb8f718d1a3)
Phat fives
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2F94coupe006.jpg&hash=dbb0849d6b3f5804927700d8e4a2a5a7030b1b89)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2Fchuckspics034.jpg&hash=72b2cf16f3b701e499fca1b73a91649955921179)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2Fchuckspics044.jpg&hash=6ce1130483d3dd0e65eaab6b42ff61976b4483a7)
Old Days
-
So fresh and so clean clean my street tunes break trannys :somb: style
-
Its OK!
I have 5 in my basement! ;)
Lets do this!
-
lol hopefully sat night dep on weather BTW 300 hp 210 Tq
-
pretty nice car, ripper vids?
-
ripper vids
:yes: its a d-series only thing its ripping is that long ass driver side axle :yes:
-
lol hopefully sat night dep on weather BTW 300 hp 210 Tq
:noel: will be smoked
pretty nice car, ripper vids?
No tune yet so she sits in the driveway waiting!
-
If you know how to launch, you wouldnt have to worry about snapping axles
-
ripper vids
:yes: its a d-series only thing its ripping is that long ass driver side axle :yes:
I'll check my purse, I might be able to slap some new axles in there..... Both sides are hurt..
-
If you know how to launch, you wouldnt have to worry about snapping axles
well if you know something we all dont do a write-up on it lets get this site started.
-
your talking about snapping axles, pre-load the tranny for less breakage
-
I think his is making an inside joke cause my axles are fucked. :-\
-
well...then...lol Nevermind.
-
well...then...lol Nevermind.
I said I THINK.
Your bulid is looking good. But your ass needs a better camara.. :P
-
yeah, like I said in my thread, Im a broke SOB after ordering all these parts
-
Yea i was 1/2 Joking
-
lol go figure, I come out lookin like an ass
-
looks like a car straight from HT
*runs and hides*
-
looks like a car straight from HT
*runs and hides*
You better run and hide! >:(
;D
-
No it doesnt cause he actually built it himself :?:
-
No it doesnt cause he actually built it himself :?:
PWNED
-
lol fuck HT
-
Towdogg, pm me whenever you go to NEDW, eventually you will notice me. I cant wait to see this setup. :noel:
-
If your patient you should be able to score a h1c holset on ebay for under 150 shipped.
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2FNewsetup003.jpg&hash=d772ee273640a21c8a88006e393494ffab5d10b3)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2FNewsetup004.jpg&hash=9126f53ac981c8ae530b445de101fb723437cce3)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2FNewsetup001.jpg&hash=bb4bc12c62276f555861adc022185c77061652cd)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2FNewsetup002.jpg&hash=1697f564a894afb406809500164e609a4764b06c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2FNewsetup005.jpg&hash=a2127415cdcf9c93014c9909457ab87a29815fe8)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2FNewsetup006.jpg&hash=d95f202c50a26ccd8528eb8f57699de4479870ff)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2FNewsetup007.jpg&hash=3adaf719b785a39aee74e3be4c49b3b6e1d26bf3)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2FNewsetup008.jpg&hash=19f29ba4ab99d2ea8c06a5cc2b624a1d8ee57291)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2FNewsetup009.jpg&hash=a1b355f5d533f230a5a46c23d1784f77bb634c10)
More pics
-
Holy shit dude. Fix all those wires.
-
Holy shit dude. Fix all those wires.
I havent cleaned up the bay yet! I'm gonna do spray on bed liner and clean up those wires soon...
I have to do better charge pipes! I don't think those will hold 20 PSI
-
nice project. Damn I miss my black coupe :'(
-
I like the way wires are running around like a chicken with no head. ;)
-
I cant wait to tune this mother fucker
-
I cant wait to tune this mother fucker
I can't wait ethier!
-
Do you have any problems with the wideband sensor being that close to the turbine?
Every thing I've read says try to be 3' from the turbo.
-
I moved it back since I put the bigger turbo on.... I heard it was 12-14 inches back from the exhaust turbine.. :-\
Any other input on that? Anyone?
-
Any trouble with the .57 trim? Its a ching chong turbo correct? Just curious because I thought about buying one until I get back to work (laid off) and can afford a 30r. thanks
-
Any trouble with the .57 trim? Its a ching chong turbo correct? Just curious because I thought about buying one until I get back to work (laid off) and can afford a 30r. thanks
Street tuning will go down today! :noel: :yes: So I do know yet!
Its an evansperformance CDM .57 trim My buddy paid $210 and I gave him my old .42/.48 and $135 for it!
It looks nice!
-
Tuning tonight ;D
-
Street tuning will go down today! :noel: :yes: So I do know yet!
Its an evansperformance CDM .57 trim My buddy paid $210 and I gave him my old .42/.48 and $135 for it!
It looks nice!
How did the tuning go?
Street tuned on 9psi
Feels pretty good
Pulls hard as fuck compared to the old 1.5
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2FTune010.jpg&hash=933f187c2765078feb2e59a99eeada9b2f774a9c)
Mark setting shit up! (Mark is lilpooh21186)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2FTune011.jpg&hash=0a00dd5b51a9bd4b83545f90cc7cda9ddb95c830)
ECU
I'll try to get a Vid later...... Tonite!
-
Red X fix the car pulls nice for low boost :yes:
-
Update! ;D
After illpooh hooked me up with a street tune on 9 psi so that I could still drive the car daily. I needed to do some things to get it ready for 20psi. I got Autozone lifetime warrenty axles and installed them already.
Illpooh also gave me an apexi world sport muffler that needed some work but I made it work...
It sounds good and its quiet..
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2FNewwheels005.jpg&hash=9f5118e6f4c687c7857c261cb4a3c903cc6b41ae)
I also got some GSR blades that I have wanted for a long time!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2FNewwheels001.jpg&hash=d2e9d969eaf3c4008d203ede3bf223caedf2ebeb)
Next things on the list are Axle seals and a clutch...
I also have the full ES kit but haven't put it in cause I hear its alot of work and I'm lazy when its cold out. :-\
-
Fucking nice your integra! ;)
Seriously I like your car, it was my third choice for a new car!
-
Rippers or Fail :evil:
-
Rippers or Fail :evil:
Come film that shit!!!!!!! :yes:
-
Rippers or Fail :evil:
Come film that shit!!!!!!! :yes:
Damn seein your pics and shit is making me want to strap up my shit now!!!!!!! I need a fucking ecu, hulog, ectune, boost solenoid, and ostrich and my shit is ready! FUCK!
-
Rippers or Fail :evil:
Come film that shit!!!!!!! :yes:
def i wanna put a youtube vid up of that cars that i have tuned.
-
Took some pics today, here they are....
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2FQuad350033.jpg&hash=d76dcb357ef06be27f1a7e3a56a40a122be5b946)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2FQuad350034.jpg&hash=1cba0f8ac53142a25b285e3209aab67a7511ba53)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2FQuad350035.jpg&hash=327ccb3866c1cb9fd2e5c417302daa8033ebcf7f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2FQuad350038.jpg&hash=7229ad14114eb53575a2d1d55c95abc38d03be84)
-
Lookin' good. :yes:
-
nice
-
black coupes ftw :noel:
what ems is it tuned on?
-
Street tuned on Crome Pro at 9 psi... Its fun!
-
9 pounds? shit not even turning ya out. I demand 15 at least.
-
damn... turn it up to at least 10 pounds.
well you should at least get dirty seconds with it at 9 pounds..
shit looks good man...
the dirty b20 is rockin 15 pounds all day
-
Gotta do a few things before I turn it up.... Trust me I am going for 20psi when I get my shit together..
-
lookin good! blacked out the intercooler I see. haha you must have like 6 sets of spare rims by now
-
damn that things looking good blurr thoes plates though :somb: steal shit
-
Do get any traction with your shit lowered that much? I mean it looks cool, but your 60' on the track arent gona be shit!! Looks nice, jut need to rase it about 2" and it would be sleeper as shit!
-
nice love that dump tube :noel:
-
Looks good on the blades
did a O0 or :somb: weld your dp/Dump with a battery an jumper cables :?:
RHMT for sure
-
haha ^^^
-
When to the track with my car and ran a 14.1 as my best time...I suck at driving on the track....
60ft was 2.4.....
I also added a Gsr TB and rc 550cc injectors
Retuned by Lilpooh again....
I'll try to get the vids up..........
-
When to the track with my car and ran a 14.1 as my best time...I suck at driving on the track....
60ft was 2.4.....
I also added a Gsr TB and rc 550cc injectors
Retuned by Lilpooh again....
I'll try to get the vids up..........
What was your mph?
-
When to the track with my car and ran a 14.1 as my best time...I suck at driving on the track....
60ft was 2.4.....
I also added a Gsr TB and rc 550cc injectors
Retuned by Lilpooh again....
I'll try to get the vids up..........
What was your mph?
104.8
-
When to the track with my car and ran a 14.1 as my best time...I suck at driving on the track....
60ft was 2.4.....
I also added a Gsr TB and rc 550cc injectors
Retuned by Lilpooh again....
I'll try to get the vids up..........
What was your mph?
104.8
With that mph you should push into the low 13's if you had some traction/better driving. Do you have anti-lag setup?
-
It's hard to launch on street tires *spin spin spin*.... if rosario and towdogg get together and throw some money in, drags will def put both of them in low 13's no problem...its hard trying to go up to NE Drag way and do good runs when you have a 2.5 hour drive each way and only get 4-5 runs each time
-
yea it was running great breaking diffs and all id like to see 13.5 O0
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2FTrackday016.jpg&hash=93babc4bf4fce1b922a0d4a6fb0ba761a7777f35)
:yes: More!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2FTrackday019.jpg&hash=0fca33e2628266452c556528fd1699c28950d1ba)
13.5's will happen......Seat time
-
Wtf is with the hood? Are the arms bent?
-
Tryed to get the wastegate to clear better........ I also beat the shit in with a hammer, thats how that dent got there.... Shit is gonna go back to normal soon..... I'm NOT madtyteJDM! :P
-
Sweet, looks fun. On street tires wheelspin pwned me also. :-\
-
Tryed to get the wastegate to clear better........ I also beat the shit in with a hammer, thats how that dent got there.... Shit is gonna go back to normal soon..... I'm NOT madtyteJDM! :P
I thought the hood was like that to dissipate heat from the engine bay like I've heard before. :)
-
Tryed to get the wastegate to clear better........ I also beat the shit in with a hammer, thats how that dent got there.... Shit is gonna go back to normal soon..... I'm NOT madtyteJDM! :P
I thought the hood was like that to dissipate heat from the engine bay like I've heard before. :)
i did for the ek worked great
-
yeah a lot of people do that to help keep shit cool, im diggen your car was really looking for a eg hatch but coupes are starting to grow on me and they seem to be popping up every were hella cheap,,,maybe its a sign haha :yes:
-
Coupes are the new hatch! These :mexi: mother fuckers up here have used up all the hatches or want a milli for them........
-
milli a milli milli milli a milli a milli I got so many girls like I’m Michael Lowry O0
-
Sweet setup man. ;)
-
Sweet setup man. ;)
Thanks man!
Car weight is 2560 with me in it....
-
Time for a clutch.......Everytime I hit full boost It shoots up in rpm and no move move like it did before...
-
lsd motor sport
-
New clutch on the way........
My buddy finally posted the vid of my best run so far.....
I'm going to the track Oct. 24th
13.5 or tranny on the ground
-
Chuck Runs 14.1 (http://www.youtube.com/watch?v=WJmysUGpVyU#normal)
-
yea that run was tits sticky's or fail. what clutch?
-
lsd motor sport
6 puck sprung
-
LSD or nothing at all. Mike FTW!!!!!!
-
hell yea chuck doing things rite ill see you at the track
-
that thing is a pile of feces out of the hole.
-
hell yea chuck doing things rite ill see you at the track
Shit! See you in a few weeks for another tune..... Also if you wanna help me play with the suspension cause I switched to the coilovers 450 in the rear and 350 in the front...
-
that thing is a pile of feces out of the hole.
aknowledge my critisizm nigger
-
that thing is a pile of feces out of the hole.
aknowledge my critisizm nigger
Seat time bitch.... car is rasied up now its gonna do better.... Go to import wars on oct 24th.....
-
up at epping? maybe ill just have to make sure im tuned on 116 and come up there and fist fuck your anus
-
yea epping is the spot hopfully they prep the track nicly
-
Mark, your going right....
-
yea debating wether to take my hatch or not.
-
New clutch is here...... Putting vitara motor back in this weekend.....
-
chuck CALL me i sent u a PM my phone crashed i need yo cell again
-
why the fuck are you never there when im at epping? never seen your car run before.
epping=win due to sea level but fail on track prep
next time you go give me a PM nika, ill do the same for you
nice setup and ok run, just keep working on the launch
-
Oct 24th I'll be at epping..........
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2Fzzz111001.jpg&hash=98123018b0ab7d199a6f600fac44260e8eab0ffb)
New clutch LSD Dragger 6 puck sprung.....
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2Fzzz111002.jpg&hash=287df7e67a7bd74c4c980212e5293925e8e9ae5e)
Just repping the real
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2Fzzz1002.jpg&hash=b09ddcf25bd71691a09b6ed481081fb7a380a9e5)
Got rid of the stainless lines for the gangster hard lines
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2Fzzz1004.jpg&hash=fbcb55a995837d32a6873258fb80363420c2bedd)
Purp....
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2Fzzz1001.jpg&hash=b0ded5cae29d5bc0a86b791514ec0c6f31fba5a6)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2Fzzz1003.jpg&hash=3e53c0569b9adec015d5b7b244ce19b3c2893397)
Under hood Oil pressure gauge
Take a look at my rHMT style Black box mod..... Gonna be sweet....
-
Gangsta Gangsta
-
I'm taking notes from this build. :yes:
-
Working up the motovation to go outside and finsh my charge pipes.......Its 40 dergrees out and windy..... Fuck I need a garage... :-[
Pics to come....
-
i would come up to help but i got homecoming football game shits gna b cold
-
Working up the motovation to go outside and finsh my charge pipes.......Its 40 dergrees out and windy..... Fuck I need a garage... :-[
Pics to come....
24 hour storage units are great places to work on your car :yes:. There is your garage for like 75 bucks a month
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2Fzzz1113002.jpg&hash=ad25c020fc49206e69385f7b95c062efdbea0d20)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi331.photobucket.com%2Falbums%2Fl475%2Ftowdogg520%2Fzzz1113001.jpg&hash=ceff8a35485a7e8f96edfb23d50b091dae6030fc)
-
looks fucking baller man, ill see you on the 24th im hunting down a tranny right now, i keep blowing stock diffs!!! :(
-
I just got street tuned on 10 pounds...... Ya boy..... Got some bugs to work out then we are goona shoot for 18ish or whatever my 550's can give...
Big thanks to Mark for the nearly free street tune and follow up tune to come.....
-
I just got street tuned on 10 pounds...... Ya boy..... Got some bugs to work out then we are goona shoot for 18ish or whatever my 550's can give...
Big thanks to Mark for the nearly free street tune and follow up tune to come.....
nice glad to hear it worked out well. GL on the high boost tune, im swapping my tranny, hopefully tomorrow, i should be able to meet you at BOTI on the 24th at epping
you need to paint rhmt on your FMIC so we know where to congregate. i will be a late arival like 3-4pm
-
looking like rain out on saturday
want to post-pone the RHMT meet to wednesday?
no rain and we wont have to wait 5 hours to get a run in, friday and meets its a long ass line to get a run in. wed can do 4-5 per hour or more
-
I didn't go..... Fuck the rain....
People are talkingabout going next sunday......