:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

RHMT DIY Hub Dyno?!?!? check it. (link)

Pages: 1 2 [3]   Go Down

Author Topic: 02 WRX HY-35  (Read 24108 times)

SiFlyBy

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 329
Re: 02 WRX HY-35
« Reply #60 on: September 28, 2010, 06:58:52 AM »
Quote from: HiProfile on September 28, 2010, 01:39:37 AM
Is the flange just warped like Johnny's mind after the man's microwave bombardment?

Also, Aero said that full-closed was too restrictive. IIRC the trucks use it as a sort of exhaust brake. Another thing is the stock hoeslut actuator is set for much more than 15psi. You'd be better off with the WRX's stock actuator.

I think the gasket is fucked after being reused 11teen times.  ::)

The actuator that I have rigged up on it came from a HX35 I think and opens the rack fully by about 15 psi. That is without exhaust pressure pushing on it.

Let me make it clear: This will happen again, likely next spring after I get bigger injector, ditch the Turbulence Generator Valves in the lower intake, move the MAF to before the turbo into a 4" housing(sorry JD, but I like MAF better with VGT, I think you do too though) and get a new set of synchros
Logged

hot coolant eats carbon, like a nigger eats chicken.

accordepicenter

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 68
Re: 02 WRX HY-35
« Reply #61 on: September 30, 2010, 04:29:55 PM »
Its def a good thing you got rid of the ching chong wg.  Turbosmart stuff is pretty good. 
Logged

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: 02 WRX HY-35
« Reply #62 on: September 30, 2010, 04:37:07 PM »
Quote from: accordepicenter on September 30, 2010, 04:29:55 PM
Its def a good thing you got rid of the ching chong wg.  Turbosmart stuff is pretty good. 

My CDM wastegate is fine..... As long as it works who gives a fuck?
Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: 02 WRX HY-35
« Reply #63 on: September 30, 2010, 04:40:11 PM »
Quote from: glustic on September 30, 2010, 04:37:07 PM
Quote from: accordepicenter on September 30, 2010, 04:29:55 PM
Its def a good thing you got rid of the ching chong wg.  Turbosmart stuff is pretty good. 

My CDM wastegate is fine..... As long as it works who gives a fuck?


Quote from: glustic on September 30, 2010, 04:37:07 PM
My CDM wastegate is fine..... As long as it works who gives a fuck?


Quote from: glustic on September 30, 2010, 04:37:07 PM
As long as it works who gives a fuck?

Quote from: glustic on September 30, 2010, 04:37:07 PM
As long as it works
Logged

SiFlyBy

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 329
Re: 02 WRX HY-35
« Reply #64 on: September 30, 2010, 08:25:40 PM »

Quote from: glustic on September 30, 2010, 04:37:07 PM
My CDM wastegate is fine..... As long as it works who gives a fuck?

Quote from: SiFlyBy on September 27, 2010, 10:03:35 PM
CDM WG was creeping boost like a motherfucker.
Logged

hot coolant eats carbon, like a nigger eats chicken.

h2a

  • Guest
Re: 02 WRX HY-35
« Reply #65 on: September 30, 2010, 08:51:48 PM »
 ;D have a nice day rain sucks
« Last Edit: September 30, 2010, 08:54:32 PM by h2a »
Logged

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: 02 WRX HY-35
« Reply #66 on: September 30, 2010, 10:51:13 PM »
Shane.  Despite CSaddict's vouching for you (past tense at this point, I'm sure) I can envision myself getting drunk and IP banning you, then denying it was me if anyone asked.

I don't expect everyone to be e-cool if they are cool IRL, and I notice you've cut down on hostile posts when shitfaced/off your meds/by your kids, but I get the feeling shit's not settled on your end.  Find some stability, dude.  You're a long way off from being banned - that's not the issue - but people really don't know what to say when you post.
Logged

turbob16hatch

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2080
Re: 02 WRX HY-35
« Reply #67 on: September 30, 2010, 11:06:14 PM »
Quote from: carkrazed on September 30, 2010, 11:02:06 PM
Fuck all those fags that are givin you shit for your sweet ass whitey bends and your migged goodness. Who gives two shits if the intercooler is ching chong, bar and plate...is bar and plate...and always superior to tube N fin.

Shit looks good. Its cool to see someone actually doing something to a wrx besides ordering parts and bolting them on.

Please stfu. quit generalizing everything. fuck core density or shit any sort of quality in general.  :?:
Logged

SiFlyBy

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 329
Re: 02 WRX HY-35
« Reply #68 on: September 30, 2010, 11:13:55 PM »
I can vouch that this interfooler is inded a good one. I have not seen intake temps rise more than 10 degrees and pressure loss throught the system is about 1.5 psi total.
Logged

hot coolant eats carbon, like a nigger eats chicken.

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: 02 WRX HY-35
« Reply #69 on: October 01, 2010, 12:12:30 AM »
Quote from: carkrazed on September 30, 2010, 11:12:58 PM
Quote from: turbob16hatch on September 30, 2010, 11:06:14 PM
Quote from: carkrazed on September 30, 2010, 11:02:06 PM
Fuck all those fags that are givin you shit for your sweet ass whitey bends and your migged goodness. Who gives two shits if the intercooler is ching chong, bar and plate...is bar and plate...and always superior to tube N fin.

Shit looks good. Its cool to see someone actually doing something to a wrx besides ordering parts and bolting them on.

Please stfu. quit generalizing everything. fuck core density or shit any sort of quality in general.  :?:

Not if the core is very large, and it's a street car.

I have seen overheating problems from doing that, though.  Be careful of blocking the radiator.  Sometimes you *have* to buy a nice core, depending on the vehicle.

Unless your aiming for huge horsepower, does it really fucking matter?
Logged

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: 02 WRX HY-35
« Reply #70 on: October 02, 2010, 10:33:51 PM »
Quote from: SiFlyBy on September 30, 2010, 08:25:40 PM

Quote from: glustic on September 30, 2010, 04:37:07 PM
My CDM wastegate is fine..... As long as it works who gives a fuck?

Quote from: SiFlyBy on September 27, 2010, 10:03:35 PM
CDM WG was creeping boost like a motherfucker.

As stated my WG is fine, I know your cdm is fucked.
Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7369
Re: 02 WRX HY-35
« Reply #71 on: October 02, 2010, 10:37:39 PM »
My cdm gate works great. Its been on 4 differant turbo setups and Ive had it for 5 years. Holds 22lbs without any problems. And i have no creap or spike. Maybey its one of the OG cdm ones b4 the tooling went to shit.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

SiFlyBy

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 329
Re: 02 WRX HY-35
« Reply #72 on: October 04, 2010, 01:40:07 PM »
Its probably more due to the fact that I had to make a fire ring for it. Which ended up being about a 1" hole instead of a 1.5" or 38mm hole. Either way the new Turbosmart shit looks baller and works very well. The BOV doesnt flutter the way the POS SSQ did, it just blows off.
Logged

hot coolant eats carbon, like a nigger eats chicken.

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: 02 WRX HY-35
« Reply #73 on: October 06, 2010, 02:37:16 AM »
Quote from: SiFlyBy on October 04, 2010, 01:40:07 PM
Its probably more due to the fact that I had to make a fire ring for it. Which ended up being about a 1" hole instead of a 1.5" or 38mm hole. Either way the new Turbosmart shit looks baller and works very well. The BOV doesnt flutter the way the POS SSQ did, it just blows off.

Lol, I love how this shit always gets out.


Aj, where did you get your wg?
Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

SiFlyBy

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 329
Re: 02 WRX HY-35
« Reply #74 on: October 06, 2010, 07:56:18 AM »
Quote from: SiFlyBy on September 27, 2010, 10:03:35 PM
I decided on some higher quality parts. CDM WG was creeping boost like a motherfucker in 3rd,4th, 5th gears. Im sure it didnt help that I had to make the fire ring since I either used ot lost the one it came with.

I stated that fact in that on the last page in the Turbosmart shit post.
Logged

hot coolant eats carbon, like a nigger eats chicken.

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: 02 WRX HY-35
« Reply #75 on: October 06, 2010, 10:01:56 AM »
Quote from: SiFlyBy on October 06, 2010, 07:56:18 AM
Quote from: SiFlyBy on September 27, 2010, 10:03:35 PM
I decided on some higher quality parts. CDM WG was creeping boost like a motherfucker in 3rd,4th, 5th gears. Im sure it didnt help that I had to make the fire ring since I either used ot lost the one it came with.

I stated that fact in that on the last page in the Turbosmart shit post.

Yeah, I dont like to read through all the bs. Basically reading pwns me
Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

SiFlyBy

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 329
Re: 02 WRX HY-35
« Reply #76 on: October 06, 2010, 03:28:00 PM »
Quote from: glustic on October 06, 2010, 10:01:56 AM
Quote from: SiFlyBy on October 06, 2010, 07:56:18 AM
Quote from: SiFlyBy on September 27, 2010, 10:03:35 PM
I decided on some higher quality parts. CDM WG was creeping boost like a motherfucker in 3rd,4th, 5th gears. Im sure it didnt help that I had to make the fire ring since I either used ot lost the one it came with.

I stated that fact in that on the last page in the Turbosmart shit post.

Yeah, I dont like to read through all the bs. Basically reading pwns me


Thats ok, I just like to look at  the pretty pictures too.  ;D
Logged

hot coolant eats carbon, like a nigger eats chicken.

ApexSilver06MR

  • RealHomeMadeTurbo's "pee wee"
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9872
  • RealHomeMadeTurbo Resident Cocksmith!
Re: 02 WRX HY-35
« Reply #77 on: October 06, 2010, 04:53:51 PM »
Quote from: SiFlyBy on October 04, 2010, 01:40:07 PM
Its probably more due to the fact that I had to make a fire ring for it. Which ended up being about a 1" hole instead of a 1.5" or 38mm hole. Either way the new Turbosmart shit looks baller and works very well. The BOV doesnt flutter the way the POS SSQ did, it just blows off.


sell me the homemade fire ring sir
Logged
pee wee for the size of my p..........

Nor*Cal Spoolin'#039#039 Nig Nog

SiFlyBy

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 329
Re: 02 WRX HY-35
« Reply #78 on: October 06, 2010, 10:00:48 PM »
Quote from: ApexSilver06MR on October 06, 2010, 04:53:51 PM
Quote from: SiFlyBy on October 04, 2010, 01:40:07 PM
Its probably more due to the fact that I had to make a fire ring for it. Which ended up being about a 1" hole instead of a 1.5" or 38mm hole. Either way the new Turbosmart shit looks baller and works very well. The BOV doesnt flutter the way the POS SSQ did, it just blows off.


sell me the homemade fire ring sir

Are you fucking serious? You did catch the parts about boost creep in higher gears right? Im talking solid 15 psi in 1,2 and easily creeping past 22 in 4th. If you really want it, I guess you can have it. Ill PM you.
Logged

hot coolant eats carbon, like a nigger eats chicken.

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: 02 WRX HY-35
« Reply #79 on: October 07, 2010, 06:24:03 PM »
Jay wants a RHMT cock ring.
Logged

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: 02 WRX HY-35
« Reply #80 on: October 07, 2010, 08:07:28 PM »
Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: 02 WRX HY-35
« Reply #81 on: October 07, 2010, 08:18:26 PM »
Logged

SOHCKLR657

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 420
  • D-Series 10LBS Will Turn Ya Out!
Re: 02 WRX HY-35
« Reply #82 on: October 07, 2010, 08:47:25 PM »
Quote from: Joseph Davis on October 07, 2010, 08:18:26 PM
Quote from: glustic on October 07, 2010, 08:07:28 PM
Quote from: Joseph Davis on October 07, 2010, 06:24:03 PM
Jay wants a RHMT cock ring.
Quote from: Joseph Davis on October 07, 2010, 06:24:03 PM
Jay wants a RHMT cock ring.
Quote from: Joseph Davis on October 07, 2010, 06:24:03 PM
Jay wants a RHMT cock ring.
Quote from: Joseph Davis on October 07, 2010, 06:24:03 PM
Jay wants a RHMT cock ring.
Quote from: Joseph Davis on October 07, 2010, 06:24:03 PM
Jay wants a RHMT cock ring.
Quote from: Joseph Davis on October 07, 2010, 06:24:03 PM
Jay wants a RHMT cock ring.
Quote from: Joseph Davis on October 07, 2010, 06:24:03 PM
Jay wants a RHMT cock ring.
Quote from: Joseph Davis on October 07, 2010, 06:24:03 PM
Jay wants a RHMT cock ring.
Quote from: Joseph Davis on October 07, 2010, 06:24:03 PM
Jay wants a RHMT cock ring.
Quote from: Joseph Davis on October 07, 2010, 06:24:03 PM
Jay wants a RHMT cock ring.
Quote from: Joseph Davis on October 07, 2010, 06:24:03 PM
Jay wants a RHMT cock ring.
Quote from: Joseph Davis on October 07, 2010, 06:24:03 PM
Jay wants a RHMT cock ring.
Quote from: Joseph Davis on October 07, 2010, 06:24:03 PM
Jay wants a RHMT cock ring.

Quote from: glustic on October 07, 2010, 08:07:28 PM
Quote from: Joseph Davis on October 07, 2010, 06:24:03 PM
Jay wants a RHMT cock ring.
Quote from: Joseph Davis on October 07, 2010, 06:24:03 PM
Jay wants a RHMT cock ring.
Quote from: Joseph Davis on October 07, 2010, 06:24:03 PM
Jay wants a RHMT cock ring.
Quote from: Joseph Davis on October 07, 2010, 06:24:03 PM
Jay wants a RHMT cock ring.
Quote from: Joseph Davis on October 07, 2010, 06:24:03 PM
Jay wants a RHMT cock ring.
Quote from: Joseph Davis on October 07, 2010, 06:24:03 PM
Jay wants a RHMT cock ring.
Quote from: Joseph Davis on October 07, 2010, 06:24:03 PM
Jay wants a RHMT cock ring.
Quote from: Joseph Davis on October 07, 2010, 06:24:03 PM
Jay wants a RHMT cock ring.
Quote from: Joseph Davis on October 07, 2010, 06:24:03 PM
Jay wants a RHMT cock ring.
Quote from: Joseph Davis on October 07, 2010, 06:24:03 PM
Jay wants a RHMT cock ring.
Quote from: Joseph Davis on October 07, 2010, 06:24:03 PM
Jay wants a RHMT cock ring.
Quote from: Joseph Davis on October 07, 2010, 06:24:03 PM
Jay wants a RHMT cock ring.
Quote from: Joseph Davis on October 07, 2010, 06:24:03 PM
Jay wants a RHMT cock ring.

:D
Logged

Holy mother of all that is cheesy and burgery, Sohclikr... YOU ARE A FAT FUCK YOU FAT FUCK.

 88 4DR DX... You Will See... D15B Powered Where'#39#39s My Powder, Come On Wit It! http://www.quizmasters.biz/Pub%20Genius/Mr_Men/Characters/Mr%20Rude_01.png

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Re: 02 WRX HY-35
« Reply #83 on: October 09, 2010, 07:17:57 PM »
Quote from: Joseph Davis on October 07, 2010, 06:24:03 PM
Jay wants a RHMT cock ring.

Quote from: SiFlyBy on October 04, 2010, 01:40:07 PM
ended up being about a 1" hole


Aren't they intended to fit snug?
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: 02 WRX HY-35
« Reply #84 on: October 10, 2010, 12:42:18 AM »
Quote from: HiProfile on October 09, 2010, 07:17:57 PM
Quote from: Joseph Davis on October 07, 2010, 06:24:03 PM
Jay wants a RHMT cock ring.

Quote from: SiFlyBy on October 04, 2010, 01:40:07 PM
ended up being about a 1" hole


Aren't they intended to fit snug?

Jays wife tells me his dick is about 1/2 inch diameter, so it will be way too big
Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK
Pages: 1 2 [3]   Go Up
« previous next »