Topic: UI's 703hp Purple beast - She is injured (Read 267767 times)

widebody93 · « **Reply #810 on:** April 09, 2010, 11:52:34 PM »

Nice trick with the string to keep track of the parts...Noted for future reference fo sho...
And is that string you yanked out of your sis/gf LOL

I kid I kid :yes:

Urban Indian · « **Reply #811 on:** April 10, 2010, 12:22:16 AM »

You are so classy widebody.

Cleaned all the parts, but the bearings on the diff. Was going to assemble it tonight but I decided I should go out with the nurses instead. Life is hard

Minor Threat · « **Reply #812 on:** April 10, 2010, 02:42:09 AM »

Your camera takes nice pictures.

Urban Indian · « **Reply #813 on:** April 10, 2010, 06:39:32 AM »

Put together and balling in 2 hrs before I went out.

malichite · « **Reply #814 on:** April 10, 2010, 11:21:50 AM »

Hotness!

bigdaddyvtec · « **Reply #815 on:** April 10, 2010, 11:45:41 AM »

Dont forget to stake the nut on the end of the countershaft....

What the hell, Its just going to go BOOM anyways..

:yes:

malichite · « **Reply #816 on:** April 10, 2010, 11:47:44 AM »

At least it isn't fucking purple.

bigdaddyvtec · « **Reply #817 on:** April 10, 2010, 11:49:16 AM »

Quote from: malichite on April 10, 2010, 11:47:44 AM

At least it isn't fucking purple.

Yet, The shiny nigger DID say he fucking PAINTED half of the tranny... I cant wait to see that shit... HAHAHHA

malichite · « **Reply #818 on:** April 10, 2010, 11:49:54 AM »

I'm sure is absurd in some way shape or form. He may be fucking polishing that by hand to.

Urban Indian · « **Reply #819 on:** April 10, 2010, 12:46:19 PM »

I will have to sand down the bottom part of the case so who knows.

I fucked up the race on the one diff bearing putting it on. I thought it should have went down farther than it did. Now I need to pull that bearing and throw on another one. Good thing I ordered 4 :yes:

widebody93 · « **Reply #820 on:** April 10, 2010, 01:08:28 PM »

Yeah I do the same with bearings and seals.. Always order a few extra just incase. Meh I'mz not classy but my standards in females are higher than crack whores, but recently below that bar rat stage. LOL... Current girl is hot IMO, and she treats me well.

You replacing the input shaft seal on that trans?

bigdaddyvtec · « **Reply #821 on:** April 10, 2010, 03:13:35 PM »

If youre not a moron, take your time... DONT FORCE SHIT, and think... You dont need a bunch of shit you dont need... As fopr Snitchniggers female choice... It strikes nme odd he is still in denial,, I mean I love crack whores, but he was married to one for years and didnt see it coming, or going.... Maybe he didnt see her cumming at all???

PICS OF NON SHINY COMPRESSOR OR IT DIDNT HAPPEN

crxvtec91 · « **Reply #822 on:** April 10, 2010, 03:29:50 PM »

Moar pic's!

widebody93 · « **Reply #823 on:** April 11, 2010, 01:03:47 PM »

Brian she never done drugs, she was just turned into a bar rat after marriage.. Who cares anyways, thats old news, now on to the next one.

Urban Indian · « **Reply #824 on:** April 11, 2010, 02:30:50 PM »

Quote from: widebody93 on April 11, 2010, 01:03:47 PM

Who cares anyways, thats old news, now on to the next one.

Why do you care? Stop talking about her and leave it alone. Don't be a faggot Jeremy.

malichite · « **Reply #825 on:** April 11, 2010, 03:34:15 PM »

So, uh, when do we get pictures of this compressor housing and painted tranny?

ratcityrex · « **Reply #826 on:** April 11, 2010, 03:35:06 PM »

I do not wish to see pics of trannys

malichite · « **Reply #827 on:** April 11, 2010, 03:35:44 PM »

As long as it isn't NA Mike style trannys.

Urban Indian · « **Reply #828 on:** April 11, 2010, 03:56:05 PM »

Left is painted cast alum. right is just pressure washed and degreased

HOW TO USE A PROPER TOOL IMPROPERLY

worked though

Broken race and new bearing

malichite · « **Reply #829 on:** April 11, 2010, 03:59:02 PM »

Case actually turned out pretty bitchen.

Urban Indian · « **Reply #830 on:** April 11, 2010, 04:04:54 PM »

I am going to wait until the whole thing is together and wire wheel the bottom part. Then light sand them both for the respray.

That and I think I am going to paint my engine bay. But we will see how much time I end up having

malichite · « **Reply #831 on:** April 11, 2010, 04:12:04 PM »

Were running out of time quickly. Shit, at least you are farther along then me. My shit is all still in the car.

Urban Indian · « **Reply #832 on:** April 11, 2010, 04:15:51 PM »

Lol there isnt really much to do.

In comparison with other years of this rush.

My motor is put together and I have 3 trannys I am bringing down. Its not like everything else isnt together and ready to be put back into the car. Just ascetics and shit are left

highroller54 · « **Reply #833 on:** April 11, 2010, 04:58:48 PM »

Quote from: Urban Indian on April 11, 2010, 03:56:05 PM

HOW TO USE A PROPER TOOL IMPROPERLY

fucking awsome, I just use two small prybars but watch the speed sensor gear.

widebody93 · « **Reply #834 on:** April 11, 2010, 05:00:28 PM »

Quote from: Urban Indian on April 11, 2010, 02:30:50 PM

Quote from: widebody93 on April 11, 2010, 01:03:47 PM
Who cares anyways, thats old news, now on to the next one.

Why do you care? Stop talking about her and leave it alone. Don't be a faggot Jeremy.

Sir a rarely mention her unless roastbeef is brought up.. Thats the extent... Levi you still have the same number?

And I always just took a grinder and cut the old bearing off, only if it was fucked to begin with....D-Rail I think still has my kit....hmmm going to call the nog and see whats up

Urban Indian · « **Reply #835 on:** April 11, 2010, 05:32:47 PM »

Bearing press takes 5 minutes

4minutes of that is setting it up

my number will never change. Same number for 8 years

danz · « **Reply #836 on:** April 11, 2010, 06:31:39 PM »

go buy some 6.5" 1/2in bolts.

makes using the puller a lot easier.

bigdaddyvtec · « **Reply #837 on:** April 11, 2010, 06:43:03 PM »

Levi. PLEASE stay away from paint , polish, or any kind of anything you can nigger up... The case looks OK, wait till its in the car and gets all skanky again (you know what your people do to pretty stuff... lol) and you need to clean it.... TRUST me you will, and you wontr ber able to simply brake clean it (simple green dont work well all the time)...

SHoulda asked, i would have shared some case ckleaning tips with you. You ever seen mine? notice how they are ALWAYS blingy??

My firast tranny was painted. It was a mistake.

malichite · « **Reply #838 on:** April 11, 2010, 07:27:23 PM »

care to share said tricks large nog?

Urban Indian · « **Reply #839 on:** April 11, 2010, 08:09:44 PM »

Forgot a little something that I need to measure speed................ Put it on and repressed the bearing.
Also sent my stock diff with trevor to have him weld that bitch up. Will be going in the spare tranny.

News:

Author Topic: UI's 703hp Purple beast - She is injured (Read 267767 times)