:::RHMT::: Real Home Made Turbo

General Category => Engine Management => Topic started by: 88dx on March 08, 2009, 11:05:57 PM

Title: Digi-Key Part #'s 4Bar MAP Sensors
Post by: 88dx on March 08, 2009, 11:05:57 PM: Anyone know the Part #'s for the 3/4 Bar Map sensors on Digi-key?
Title: Re: Digi-Key Part #'s
Post by: lilpooh21186 on March 08, 2009, 11:31:56 PM: thats what im looking for J/E wants Crack money for a gm 3bar
Title: Re: Digi-Key Part #'s
Post by: jeffsciv23 on March 08, 2009, 11:49:27 PM: all i could find

http://rocky.digikey.com/WebLib/Motorola/Web%20Data/MPX4250A,%20MPXA4250A%20SERIES.pdf (http://rocky.digikey.com/WebLib/Motorola/Web%20Data/MPX4250A,%20MPXA4250A%20SERIES.pdf)
Title: Re: Digi-Key Part #'s
Post by: jeffsciv23 on March 08, 2009, 11:57:30 PM: found this 3 bar

http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=MPXH6300AC6U-ND (http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=MPXH6300AC6U-ND)
Title: Re: Digi-Key Part #'s
Post by: 88dx on March 09, 2009, 12:18:00 AM: Quote from: jeffsciv23 on March 08, 2009, 11:57:30 PM
found this 3 bar

http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=MPXH6300AC6U-ND (http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=MPXH6300AC6U-ND)
The pic dosent show the Circuit board I wonder if you have to buy that separate?
Title: Re: Digi-Key Part #'s
Post by: turbohf on March 09, 2009, 12:39:41 AM: the board is a xenocron part.... :-\
Title: Re: Digi-Key Part #'s
Post by: turbo4life on March 09, 2009, 01:51:11 AM: i got the part numbers for 2 bar and 2.5 bar and 3 and 4 bar map sensor holla nogs
Title: Re: Digi-Key Part #'s
Post by: d112crzy on March 09, 2009, 02:27:25 AM: Just post them up nagger.

Would be awesome if they were doing the free map sensors from freescale again. :noel:
Title: Re: Digi-Key Part #'s
Post by: 88dx on March 09, 2009, 02:28:04 AM: Quote from: turbo4life on March 09, 2009, 01:51:11 AM
i got the part numbers for 2 bar and 2.5 bar and 3 and 4 bar map sensor holla nogs
post them up
Title: Re: Digi-Key Part #'s
Post by: jeffsciv23 on March 09, 2009, 02:38:21 AM: Quote from: d112crzy on March 09, 2009, 02:27:25 AM
Just post them up nagger.

Would be awesome if they were doing the free map sensors from freescale again. :noel:

yeah i doubt that will never happen again
Title: Re: Digi-Key Part #'s
Post by: Joseph Davis on March 09, 2009, 08:58:36 AM: Freescale (Motorola) no longer sends free samples of any chips to generic email addresses, unless you pay shipping which exceeds what the chips could be purchased for + shipped from Digikey. I tried to get some 1815's the other day and was denied. :(
Title: Re: Digi-Key Part #'s
Post by: dvst8r on March 09, 2009, 10:06:44 AM: JD what do you mean by Generic email addresses? If I send from my work email would they?
Title: Re: Digi-Key Part #'s
Post by: shadow on March 09, 2009, 03:22:05 PM: shit i found.

http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=MPXH6400AC6T1CT-ND (http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=MPXH6400AC6T1CT-ND)

http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=MPX4250AP-ND (http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=MPX4250AP-ND)

http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=287-1010-ND (http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=287-1010-ND)
Title: Re: Digi-Key Part #'s
Post by: HiProfile on March 10, 2009, 03:54:43 AM: I'm going to free you nogs from Xeno-domination of the Freescale (not motorola, n00bs) MAP sensors. I'll try to post a new DIY to make your own MAP using the stock housing. I already have five special edition PINK omni 4bars, so I'll probably make a 3bar. Madmax did the original write-up, but the pics weren't all that great. Anyways, here's the google cache on it. If it doesnt' work, google "madmax motorola sensor" and click "cached" right below the URL.

http://209.85.173.132/search?q=cache:ZY9NJ4evngYJ:www.homemadeturbo.com/forum/index.php%3Ftopic%3D74311.msg879279+madmax+motorola+sensor&hl=en&ct=clnk&cd=1&gl=us (http://209.85.173.132/search?q=cache:ZY9NJ4evngYJ:www.homemadeturbo.com/forum/index.php%3Ftopic%3D74311.msg879279+madmax+motorola+sensor&hl=en&ct=clnk&cd=1&gl=us)
Title: Re: Digi-Key Part #'s
Post by: turbo4life on March 10, 2009, 02:42:41 PM: ya already beat me to it

mpx4250ap is the 2.5 bar $12.7
mpx2200gp is the 2.0 bar $9
Title: Re: Digi-Key Part #'s
Post by: HiProfile on March 11, 2009, 04:04:51 AM: mpx2200gp Is a GAUGE sensor. Gauge reads the difference between the port and normal atmosphere. Differential is the difference between the 2 ports. Everything besides ABSOLUTE is useless.

BTW search digikey for "freescale", select "Pressure" under "Sensors, Transducers" section, select "absolute" & filter, then select all voltages besides the 0-40mV. Subtract ~14.5 psi from the max pressure and that's your boy.
Title: Re: Digi-Key Part #'s
Post by: Joseph Davis on March 11, 2009, 10:03:03 AM: Quote from: dvst8r on March 09, 2009, 10:06:44 AM
JD what do you mean by Generic email addresses? If I send from my work email would they?

gmail, hotmail, yahoo. I bet an .edu address would work, so should your company.

Quote from: HiProfile on March 11, 2009, 04:04:51 AM
BTW search digikey for "freescale", select "Pressure" under "Sensors, Transducers" section, select "absolute" & filter, then select all voltages besides the 0-40mV. Subtract ~14.5 psi from the max pressure and that's your boy.

Good tech, you n00bs better eat this shit up.
Title: Re: Digi-Key Part #'s
Post by: onlyflash944 on March 11, 2009, 12:56:18 PM: i've got a .edu email thats worked for national semiconductor before. freescale dont' have shit that we can use for free samples that i've found
Title: Re: Digi-Key Part #'s
Post by: Joseph Davis on March 11, 2009, 03:56:48 PM: Freescale is what became of Motorola's IC and component branch, there's quite a bit of logic/MCU I'd like from them.
Title: Re: Digi-Key Part #'s
Post by: onlyflash944 on March 11, 2009, 04:31:19 PM: Quote from: Joseph Davis on March 11, 2009, 03:56:48 PM
Freescale is what became of Motorola's IC and component branch, there's quite a bit of logic/MCU I'd like from them.

let me know if theres a sample you want me to try to get, maybe we can work a trade out for those shift forks
Title: Re: Digi-Key Part #'s
Post by: HiProfile on March 13, 2009, 02:01:37 AM: They still offer the g-sensors last time I looked. I've already tried one on my SSI-4: give it voltage, ground, and read the output. They are instant response, and only need the extra resistors/capacitors if you want an ultra-clean output. They're the cheapest g-sensors you'll ever find (~$15 IIRC), if you can't get samples at least. :somb:

As for the MAP sensors, they range from $11-16, and usually $6 for shipping. I should have my DIY MAP Sensor write-up posted soon, so you can have a bolt-on 4bar MAP for a FRACTION of the cost of an Omni/Hondata 4bar.
Title: Re: Digi-Key Part #'s
Post by: J. Mills on March 14, 2009, 05:34:32 PM: 2.5 bar
Part # MPX4250AP-ND
Price $12.45
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=MPX4250AP-ND (http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=MPX4250AP-ND)

3 bar
Part # MPXH6300AC6U-ND
Price $14.36
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=MPXH6300AC6U-ND (http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=MPXH6300AC6U-ND)

4 bar
Part # MPXH6400AC6T1CT-ND
Price $14.36
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=MPXH6400AC6T1CT-ND (http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=MPXH6400AC6T1CT-ND)
Title: Re: Digi-Key Part #'s
Post by: ApexSilver06MR on March 15, 2009, 04:48:48 PM: you should post 28pin sockets as well....
Title: Re: Digi-Key Part #'s
Post by: Zeniceguycrx on March 15, 2009, 05:58:47 PM: Quote from: d112crzy on March 09, 2009, 02:27:25 AM
Just post them up nagger.

Would be awesome if they were doing the free map sensors from freescale again. :noel:

They want deposit money now, I tried to start it again but orig
xeno crushed us
Title: Re: Digi-Key Part #'s 4Bar MAP Sensors
Post by: 88dx on May 06, 2009, 09:26:21 PM: OK so this is the 4bar I ordered.
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=MPXH6300AC6U-ND (http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=MPXH6300AC6U-ND)

When you check out make sure you use USPS as shipping, because it is way cheaper.

And here is the spec sheet:

http://www.freescale.com/files/sensors/doc/data_sheet/MPXH6400A.pdf (http://www.freescale.com/files/sensors/doc/data_sheet/MPXH6400A.pdf)
Title: Re: Digi-Key Part #'s 4Bar MAP Sensors
Post by: BoostForLife on May 07, 2009, 01:58:49 AM: That's the correct sensor. I just did this about a month ago, worked perfect.
Practice soldering very small fucking shit before attempting to put this in.
Your car will need a retune completely.
Title: Re: Digi-Key Part #'s 4Bar MAP Sensors
Post by: Joseph Davis on May 07, 2009, 02:31:21 AM: I love 4 bar sensors.
Title: Re: Digi-Key Part #'s 4Bar MAP Sensors
Post by: 88dx on May 07, 2009, 11:49:29 PM: Quote from: Joseph Davis on May 07, 2009, 02:31:21 AM
I love 4 bar sensors.
:yes:
Title: Re: Digi-Key Part #'s 4Bar MAP Sensors
Post by: caged on May 08, 2009, 05:49:27 AM: So would these 3 bar sensors be a cheap substitute for a GM 3 bar sensor for a Haltech? or will that not work?
Title: Re: Digi-Key Part #'s 4Bar MAP Sensors
Post by: walter on May 08, 2009, 11:59:21 AM: Quote from: 88dx on May 06, 2009, 09:26:21 PM
OK so this is the 4bar I ordered.
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=MPXH6300AC6U-ND (http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=MPXH6300AC6U-ND)

When you check out make sure you use USPS as shipping, because it is way cheaper.

And here is the spec sheet:

http://www.freescale.com/files/sensors/doc/data_sheet/MPXH6400A.pdf (http://www.freescale.com/files/sensors/doc/data_sheet/MPXH6400A.pdf)

do u have any how-to for wire to stock one?
Title: Re: Digi-Key Part #'s 4Bar MAP Sensors
Post by: BoostForLife on May 08, 2009, 12:57:04 PM: How to:
http://www.realhomemadeturbo.com/forum/index.php?topic=649.0 (http://www.realhomemadeturbo.com/forum/index.php?topic=649.0)

These sensors should work with any with any EMS that has custom inputs for MAP sensor.
Title: Re: Digi-Key Part #'s 4Bar MAP Sensors
Post by: walter on May 08, 2009, 03:24:27 PM: i asked to digikey and they gave me 54$ shipped for one :?:
Title: Re: Digi-Key Part #'s 4Bar MAP Sensors
Post by: Tim on May 08, 2009, 04:01:41 PM: Quote from: walter on May 08, 2009, 03:24:27 PM
i asked to digikey and they gave me 54$ shipped for one :?:
holy shit that seems rediculous. How much would a letter be cause I plan on getting a couple more my next work order. I'll throw the fucker in an envelope and mail it to you if you want.
Title: Re: Digi-Key Part #'s 4Bar MAP Sensors
Post by: Dweezil on May 08, 2009, 04:40:20 PM: I'm putting in a digi key order in the next week or so, if people are interested I'll get a couple.
Title: Re: Digi-Key Part #'s 4Bar MAP Sensors
Post by: Joseph Davis on May 10, 2009, 02:14:32 PM: I got four 4 bars for $10 each plus ship from Digikey. IIRC Freescale's site wanted $14/per.