:::RHMT::: Real Home Made Turbo
General Category => Forced Induction => Topic started by: hatchbone on April 10, 2012, 12:29:00 AM
-
parted out the hatch from the time i got my new car till the time very thing was parted and new shit purchased was about a week (crazy good deals) so ive wanted a s2000 for a while and i finally got one its a 2001 ap1 with ap2 2.2 swap, i also took my tires from my hatch and had them mounted on the stock 16's cause traction will be a issue all these parts i have already paid for and are going to be done and on the car in the next two to three weeks im still waiting for a couple things to show up
the car
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0576-1.jpg&hash=c6787f12b94f4be814e8a280091b1b363ac5f89a)
:'(
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0516.jpg&hash=c26bede1c58b78f1f8fd999a18e6bc250c2e5c23)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0517.jpg&hash=bb9365ce697a6f29cc467a4ae0ea97f6d8cbe1b4)
my ford 8.8 rear end with eaton lsd and Richmond gear 3.96 ring and pinion and also all the custom fbm hardware to mount the rear, still waiting for drive axles from drive shaft supply should be here this week
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0562.jpg&hash=4a90277892cb0a398405673dcee2992528b2779a)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0563.jpg&hash=72190e6de4fe8895d7f9c20e2a8f14279897b512)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0575-1.jpg&hash=9cd86eac281f8eb2e000fe967c3ab6e496d7163c)
my haltec plug and play joint also got the race pack just has not showed up yet
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0574-1.jpg&hash=df14b847a05efdccd9fa13396c4baeefb662e142)
fmb shift knob for the new trans
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0573-1.jpg&hash=f7d2c393d9bb4c2c77b4c6d4fe6276365ebe6a00)
trans adapter to accept the v160 supra gear box
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0561.jpg&hash=7664e54a710ffce4679dd4861f46f0ccc0a160f1)
custom twin disk for the conversion
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0569-1.jpg&hash=68b2d497b4580e3484b0fbe04edf1c86e08b1256)
getrag v160 gearbox
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0559.jpg&hash=679c679ab108926b2e4160990920567acb87c00f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0560.jpg&hash=a33db1418e75338cfd5d1573a800870c414f23a6)
fbm shifter adapter
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0568.jpg&hash=2a42743c9cd133ce083f83ebb7195f6cbf428765)
twin fbm 340's and pump hanger
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0572.jpg&hash=338308ca0df661189935d819f6188e80970312d3)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0571-1.jpg&hash=02dbaf8145ad0ce71f0ea4f1a1bb190441eb29a2)
fbm triple core radiator and fbm mount
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0564.jpg&hash=91dff3f82213616a44a284efebcf3dc6329442e1)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0566.jpg&hash=dd32e19bc90c99a0bb93cdf3768e61e894d198d7)
fbm oil filter relocation bracket
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0570-1.jpg&hash=59d79bdc6024743eb98dc1c050888bb128801087)
for turbo i got a precision 6766jb t4 divided housing and also in the picture is my set of weld racing wheels along with the front skinnies, these are by far the dopest set of wheels i have ever owned. period
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0558.jpg&hash=e348bc8b487e96c33b8861300d6c46cb6107bbea)
fbm billet plug cover for my new vc setup
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0565.jpg&hash=83e7158a79e3881a50f5503264974270e163fc59)
stuff i cannibalized of my hatch are my 46mm waste gates, -12 fbm fuel lines fic 2150's and fbm reg also my catch can setup,along with a couple more small items
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0577-1.jpg&hash=4c17bd467e0752ac59fc875a400ae4600b1e8e07)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0578-1.jpg&hash=330717bf043fd5c3b52cb821b8415efbfb3bc61b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0579-1.jpg&hash=461a58cc2caec81baa0875c8595b0a0a52c4b5d8)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0580-1.jpg&hash=fe404e459e2ee63acaaef07cc2eaa3240080ebe6)
things not pictured cause im waiting for them to show up are drive axles, my 6point role cage and fbm 1000hp intercooler core. also i have the fbm head stud kit for the s2000 you guys know what head studs look like ,also fbm t4 divided duel 46mm turbo manifold made in house so when the cars there ill get some progress pics of that also all my piping and exhaust also in house this is just a update list the car should be back on the ground in the next two weeks
things i still need for a 700hp wheelie standing shit stomper is NOTHING lol all paid just waiting now so enjoy and i will update this thread as fast as it goes together
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F525355_328056533918724_205471836177195_894770_230250425_n.jpg&hash=9cfc03d44f386156b7955e3cf811af689f83df7a)
-
Is FBM sponsoring you, or you them? lol
Things can never be un-rhmt unless you pay someone else to do it. I wish I had the balls to drop $20k in a week. Looks good so far.
-
Living the dream, needs some more updates.
Are you guys going to race outside of Mn?
Like to to this at Bandimere outside of Denver June 9th. :noel:
-
If I had infinite money to spend....
-
I call them my official,unofficial sponsor most the 9'sec s2000 in the country run there rearendvkits along with the v160 conversion,its like the one stop s2000 in the country I'm known them for years so it was a easy decision to make who I get my parts from lj at fbm has tuned my cars for close to 7yrs now and would give the shirt off there back to help me out,I will up date this over the next week or two I'm just waiting for the Eaton LSD and my drive axles then she gonna get stripped like a nogs bike and built to beast mode , looking to run mid 9's full weight a/c and my fat ass ,hatch was fun for the past ten years but I need to see what a wheelie is all about lol ,many updates to come
-
no fuckin around.... i like it. :noel:
-
Sad to see my hatch stripped like a niggs bike but made it easy to get the parts I needed so it all works out in the end
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0581.jpg&hash=dbabf437ca8a45b609d999990ea792d17e78e885)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0582.jpg&hash=3b7f94af0618a2053c318f4e78ed33b6bc6574e7)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0583.jpg&hash=a26c51a5b3e1c9bdebbcbbaeacc81296c3059200)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0585-1.jpg&hash=1bfd258d0174e48ed4a0f3badab72c4c2a74800a)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0584-1.jpg&hash=4e7405e5877bb270748210599c1751d06891d8a6)
-
Damn that is a sick build!!!
-
Damn, did you have a rich uncle die a month ago or something? Gonna be pretty serious
-
I paid 7.5 for the car all the parts you see I paid for when the hatch got parted,I only came out a pocket like a g
-
74mm yup ,I have a pile of boxes ten feet high lol just need this LSD and axles to show up and its on
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0589.jpg&hash=99cbf6298b46911e0fe6573199483af37014edca)
-
looks like you just walked around FBM taking pics like a wedding registry... ::)
-
I hope FBM fully blew you. Prob should have put in an auto but the 6spd will be fun on the street.
-
I was to lazy to pull my Shit out the boxes but ya I did walk around and take all the pics off the wall ;DDD
-
auto trans would be dope I'm trying to best realstreet performances stock block record of 9.5 so if they can pull that Shit off I'm sure I will come close with enough seat time,if not sleeves and auto here I come lol
-
drive shaft and axles showed up today now just waiting on the lsd and ring gear and we all good for project strip down
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2Fimagejpeg_2.jpg&hash=b0d0d270f7e49c6d225204e95c4e64c49c5069cd)
-
Damn I cant wait to see more! Are you going to do anything to the motor? Maybe open the ring gaps a bit?
-
head studs and springs run the bitch till it blows then i might build it should be about 600-700 for this year if it holds together
-
It will make 600 all day especially on the e85... Not only det friendly, but cooler too.... Cant wait to see your big ass in the air like WHAT baby!
-
That be the goal
-
taking the stock wheel out and putting in my momo tuner series out the hatch and i got these so i can squeeze my big ass in and out when i get the cage in it in a couple weeks
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F3006886115204040_1.jpg&hash=cafce7e0754a539ed9f7c86a9fb872e1e1ccb5fe)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F86ef80b3.jpg&hash=5f0249ce62f4e3a7057a414766a6257eb9e21195)
-
are those just steering wheel quick disconnects? they look fancy whatever they are
-
ya they fuck ya though you have to buy the hub(black one) to bolt the quick connect to it (gold one)? why would they not just make it one piece, fuckin rape sauce it is, have to buy two pieces for one thing ???
-
Just rapin your wallet for all its worth!
-
Valve cover came today also the custom twin disk for the supra trans with hydro throw out bearing now I have it all but slicks for my drag rims lol almost there
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2Fimagejpeg_2_2.jpg&hash=26e2e9940e5d177557a99f1bf1485365a4698e0c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2Fimagejpeg_2_3.jpg&hash=25e91523ac28587833adac8936de9d5ab4de8ce3)
-
Looks like you have a long road to go.
It is one thing to have all those beautiful parts, it is another to have them installed and working in perfect order.
So how soon is these parts going to be used in anger? :noel:
-
Looks like you have a long road to go.
It is one thing to have all those beautiful parts, it is another to have them installed and working in perfect order.
So how soon is these parts going to be used in anger? :noel:
I am going to refrain from my comment. Its too easy compared to the energy to type it. O0
-
I start tomorrow should have completed in two weeks, there is a reasoni have so many parts,so I'm not the guy who has to stop when I start,as stated above only thing I need is slicks all else is here ;DDD
-
Oh ya and my 24's showed up today to donk this bitch right next to my cage ,that prob wont be in till the rest is done though
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0627-1.jpg&hash=475f789f4ba060aabdfd1136802528e62fac2097)
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0648.jpg&hash=3ae696194affd8aa39be04028711ba2728dee346)
-
My only question is hopw many and big of FBM stickers you can fit on that POS LOL :O)
-
Not one sticker,they brand there products with there logo just like any other company just so happens they stock all I need for this whore,no stickers though just engraved and painted
-
are those stickers on the valvecover?
-
Yes they are
-
Yup
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0650.jpg&hash=7a6e86f5dd2b4d776b50d67a1ce39696d702b835)
-
L19 studs to ;DDD
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0652.jpg&hash=f08e6956fbb682bd1015502accc3b46381c97ebe)
-
maybe i read that wrong, but i thought you where gonna rock a stock motor?
-
I think he means stock shortblock. So barely stock. IMO kinda silly to do if there's no prize involved, since you're already bought a shitload of expensive parts for everything else.
At least regap the rings, that would still be stock.
-
Stock block ;DDD every thing else will be built
-
Started on the trans today tomorrow the trans install will be done,all the shit is bolted up fo ig but I was go lazy to finish
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0659.jpg&hash=6226de721074bc423141ad92e25bd1633015cb81)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0660.jpg&hash=8b229a4834e562abaaa3213c69e2294e4f100237)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0661.jpg&hash=2b818d978549a9c42b7591b207291ce08e0645f1)
-
Fuck, I wish I had access to a lift. :'( looks good. In for ripper vids!
-
left the trans install alone today, i did notch the bell housing to accept the s2000 starter and just stripped the bay and pulled the head and rear end out not to bad for 3 hrs now im going shooting, head should be done earlie next week with valves, guides and seals and springs along with punching the head stud holes out bigger to accept the L19 studs, should go together fast after that cause all the drive train will be in tomorrow so only thing left is manifold fab piping and exhaust
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0666.jpg&hash=39e97d2bbc1ee679cfc447d674b32a086e8fb2af)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2Fimagejpeg_2_4.jpg&hash=5aec5fcebda0d0e8de4c4b2fa0e7a39c83832324)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0664.jpg&hash=6ceb670c2d439aa0a0ad424b616ec0eba7a96b01)
-
Damn looking good!!!
-
thanks it coming along quick whole drive line will be done tomorrow so only thing left is assemble engine back and all the manifold/exhaust shit then tune then shit stomp evos and mustangs
-
Got my wheel and quick release in today. So when the cage is in I can get my fat ass in and out
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0670-1.jpg&hash=c2e6418f9a29c71b59189b573adb71a279795501)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0671-1.jpg&hash=674e962620b031af6042d00d922e8d17ce08bfd7)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0672-1.jpg&hash=dafb94f3dfbb79a80e9c5239fd87c02b0e09e140)
-
i really need one of those for my hatch. its tough to get in with the corbeu seat, and almost impossible with the cage
-
4days for the dowl pins for my trans ??? fucking toyota, i should just turn some on the lathe
-
i would overnight them...
-
That is ?? 7 days get shipped reg I don't know what the hell they got going in at Toyota,shit prob could over night stuff over seas faster
-
no question, tell them to overnight the fuckers. i do it all the time at work. shit we overnight steering knuckles from the midwest and other odd shit.
-
26x10x15 Mickeys and 17x4.5 race master skinnies for the welds
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2Fimagejpeg_2_7.jpg&hash=1edbc1a5f9c9876ef84ab1f9029ae4d4d09428ea)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F2012-04-11_09-18-13.jpg&hash=b91cd238708885f6f7e64e8c6e3fb0f5eaa24708)
-
uber baller :noel:
-
uber baller :noel:
-
Thank you
-
There is more money in this one pic, than I have in my entire GRM challenge car. Lol
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F2012-04-11_09-18-13.jpg&hash=b91cd238708885f6f7e64e8c6e3fb0f5eaa24708)
Not knocking a higher dollar build, I just thought it was funny.
-
Duel pump hanger with twin 390's installed, Eaton LSD and richmond 3.96 gear set installed in the 8.8 rear,also all mounts bolted up ,and the 5.9 axles showed finally so should be in the car very shortly ,also got my slicks mounted up shits look way to good
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0694-1.jpg&hash=4e72acdb712c14f4725c94c751ca1195a3e7ded5)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0695-1.jpg&hash=1cbc4859d6a78738a5228b575fac9e47d3da5173)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0697.jpg&hash=f47780c0f27a28c0c2ea49aa915d12312498afc9)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0698.jpg&hash=8c26bdcb4c6dc78ca50e224f57558749ef380ff8)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0699.jpg&hash=0c14c9c3c4b0f387f840a151714a4011b8dfd7cc)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0700.jpg&hash=6e2ed84bba44e54ea458df5ba23f174a1cae264e)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0693.jpg&hash=6fe9972cb451ff8a19038469962ec29c6f13bda1)
-
Hot Damn that looks sexy!
-
Rearend install completed and while I was chillin my race pack for my heltec showed up
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0707.jpg&hash=d543809aab6e4485dd65226d667a90fe0b81d91b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0701.jpg&hash=ef84f5074b58dcc2858ee8be29c4a1b85f6a5586)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0702.jpg&hash=91230060058efea2de60bc7ee88fb8df88af16c5)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0703.jpg&hash=00f4a5a475f305a30eb600bac39ec2de99138752)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0704.jpg&hash=efac10762f9a33e923b23247fec0b6941ce5e20f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0706.jpg&hash=c59b9c402b01298165b516d066791110f6c2ad67)
-
Hot Damn that looks sexy!
thanks head will; be back tomorrow, but the turbo manifold dp and ic setup is already built so should be done very soon, with descent ripper vids to back it
-
I sometimes wish I didn't buy other toys so I could play more with another beast of a car.
Then I go play on my other toys and forget it
-
Hot Damn that looks sexy!
thanks head will; be back tomorrow, but the turbo manifold dp and ic setup is already built so should be done very soon, with descent ripper vids to back it
Damn BALLER!
-
This build gives me a chubby!
-
Trans is in here the pics
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0708.jpg&hash=98bad1211821e0286431f23a4d117e37429faeda)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0709.jpg&hash=dc024ce98f1c68bf5750604846b23d58695234ad)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0710.jpg&hash=6ac30ea1503cbbfb766efe90672b6923db6f18ba)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0712.jpg&hash=85249b164dc13fe3e5ccc1b13536313d9e8fbcce)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0713.jpg&hash=c8da49023d8fef8e93d37ff131f8d11bce8a62b0)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0715.jpg&hash=362a7ef70df22ef7a97a44a23290e841a0e2125d)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0716.jpg&hash=3fa00fdf6f4b0fe5c75c1e9366dcf9e8870e6728)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0717.jpg&hash=8884c7fef5b521615ebf2a79aad93cda3cfa7b9e)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0718.jpg&hash=3239fb873423c6f0b25cede8bd68e3431bb76a28)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0720.jpg&hash=29da81809587572e576b7ffcea7e6c1d16906d0c)
-
BALLER!
-
Wow with all these bolt-on, you make it look easy.
So is there anything you have fabricate for this build? :noel:
-
Turbo set up is about it for fab,no need for the drive line if they make kits but here is the manifold,its off a jig so I'm not sure if it counts as fab
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0731.jpg&hash=565d8bef17e0e11a096bfc49f48f965cb287fad7)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0725.jpg&hash=55b21c7df9b532cfa4c97b8406a0ea3c67843fa2)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0730.jpg&hash=40a87b1e70da5b860c09b2f6e08f203466774090)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0727.jpg&hash=190d8f4720195de6b03d700dd8cda010a0286f68)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0728.jpg&hash=0f4297b5a03f2c2ec77877f0b9a3bd85f20d0074)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0729.jpg&hash=22a1c5a76cf6836aa073bedaaf00ea96bb255e9c)
-
Head done ready for install all new fearra valves and springs
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0724.jpg&hash=0558ec6d93251bd6778aa5b5ed0b2f976cc81754)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0722.jpg&hash=5a1be4c8a92b329604d08a43cc6d2058666b6b8f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0723.jpg&hash=759810d505ddc3f4f09770a931d62fb33726ed43)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0733.jpg&hash=07905dd579b6959fbd3a138fba40be7bada3dfd0)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0734.jpg&hash=87b97248748945356cd736fc5f2ba0cbe54a4e8e)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0736.jpg&hash=479be890f38dffbf80e659683ba5b1e860042e70)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0737.jpg&hash=743e820aa4ee5dfa6b64b7f6f4ec8576550fcdf2)
-
did you just win a settlement or something?
-
i purchased the s2000 then just parted my hatch for all the parts
-
Did your hatch worth 40k$ or something? lol
-
Getting there for sure
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FS__7FEF.jpg&hash=ef59d6280e6c7989b86dc2dada6bc052fb2dba37)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FS__2901.jpg&hash=6276a623d5eb46e8903a7cb84c025504361ee09d)
-
so that looks like a yes on the heat and AC? :noel:
-
Heats going but the ac is staying ,I'm waiting on the ac line relocation kit that sends them around back of the engine instead of the side should be hidden for the most part
-
Turbo and all wiring done now just exhaust and piping left also mocked up the drag wheels,still have to install the struts to adjust ride height but you get the picture
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2Fimagejpeg_2_10.jpg&hash=9190c77eca6e767de525fa6b4ccd9db7a8f4a808)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FS__2CC1.jpg&hash=166f1ba13a06cd8a43539fe82fd864c7a5ca479b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FWP_000110.jpg&hash=b8b7899b04d0b2f1f4b92ddb2b6ebb9b5f698ada)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FWP_000109.jpg&hash=512dd906ef7ee4fea8816ee98bb5d41dc6cb8b51)
-
BADASS!!!!!
-
:noel:
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2Fimagejpeg_2_12.jpg&hash=24bad834dc2283174d02111b9d028d1a6a95dfa9)
-
damn. moving along
-
Tuning tonight
-
Dyno sheets making more than me or FUCK YOU
-
New stock block world record ;DDD
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0759.jpg&hash=6dc6555ba0faf197c417474ac74f23fa8fc0a07b)
-
NICE! Got videos?
-
might get a teaser vid till the full length comes out here is the dyno sheet of that run little breakup but made it lol
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi124.photobucket.com%2Falbums%2Fp16%2Ffullblown2k%2Fjakes2k.jpg&hash=716a85230f636fb70db86c5b91d65f52eccdc9b4)
-
teaser till the whole vid comes out
Ballistics Jake :: Stock block S2000 record (http://www.youtube.com/watch?v=Wq1et9Eoe3E#ws)
-
FUCLK that is awesome Jake!!!
CONGRATS!
You deserve it. Im impressed and need one of those turbos. I cant immagine what it would be like on my shitpile.
SUPER Impressed with how quick you guys got this shit together. I like!
How high did you rev it... TQ seems light for the power...
-
9k
-
clearing the crowds boss style lol silly noobs
lolz-lag aka anti lag (http://www.youtube.com/watch?v=rB1Rwp7VpvA#ws)
-
Ballistics Jake :: Record breaking WHP :: 800.06whp! (http://www.youtube.com/watch?v=cxOLCybSvIE#ws)
-
Bad ASS!!!! Lets see a video of this beast on the street already!
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20120924_162932.jpg&hash=57b648e973871a16e5bf440843c911ec38f21efc)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20120924_161008.jpg&hash=8de959e08ca464784dd9ef2d3884dc3431459f3b)
Should be faster
-
but why? :'(
-
With the irs suspension every time I shift the car gets mad squarely on the top end so installing a t400 with trans brake so I dont have to shift so much at the track, should help with the launch and keep the car more consistent at the track I already have the plate to bolt it to the engine now just need a custom flex plate made and figure out what stall to run on the converter, im new when it comes to stalls so any input would be greatly appreciated
-
Any vids of it on the track?
-
Found one this was a 10.2 pass with a fucked 60ft and shifting 3rd early cause I noob shifted it the day before, next day I just worked on my short track dailed the 1.44 60ft in this video down to consistent 1.36 60's, I couldn't get 9's though cause 3rd was toast at this point so was pointless to turn the power up .so after I wait two months to get the v160 rebuilt I decide to go t400 lol so this is the only vid I have car only made about 20 passes this year next year big dog style for sure
hatchbone s2k 10.2 (http://www.youtube.com/watch?v=W9B79Y2aM4o#ws)
-
Why not a glide?
What rpm do you have your launch control set at? It will be close to what you need for stall.
-
7500 I dont think it needs to be that high any more I would still like to take it out on the street I was thinking 6.5k launch with 4k stall maybe? Some were around there any ways if that would work like I said im noob auto/stall guy
-
thought you wanted to keep it manual cuz its still a street car?
-
7500 I dont think it needs to be that high any more I would still like to take it out on the street I was thinking 6.5k launch with 4k stall maybe? Some were around there any ways if that would work like I said im noob auto/stall guy
If you were to three pedal it, when could you build boost buy? When you were dynoing what rpm was peak torque at?
-
I looked at my dyno sheet on previous page but its in mph not rpm id say 5500-6000 best guess
-
thought you wanted to keep it manual cuz its still a street car?
still has ac and a radio so its a street car to me this car is about 80/20 track street to me
-
I hope FBM fully blew you. Prob should have put in an auto but the 6spd will be fun on the street.
called it
-
Touche` sir
-
I would start at about 5500rpm for a final stall speed then. Now some places when you ask for a 5500rpm stall will have it start to stall at 5500rpm and you will end up at 6500rpm+ on the trans brake, and some places will start to stall it at about 4000rpm so you end up at 5500rpm on the trans brake. I would probably start with the latter, and work from there.
I recommend pro torque converters http://www.protorque.com/ (http://www.protorque.com/) they work with a lot of turbocharged race cars, and have a good understanding of what a turbo car needs. They will probably even have a better recommendation for initial stall speed.
-
Now with a 5k+ stall could you still drive it on the streets if need be? I like to beat on bikes and spendy v8 builds via highway pulls on the occasional weekend
-
I'm sure you could, not sure how drive able it would be, but if you get too much lower you might have trouble building boost on the line.
-
This is the trans Im having built right now, has a little slimer bell housing so firewall modifications should be slim to none I hope either way shits going in ,
http://www.atfspeed.com/store/index.php?main_page=product_info&cPath=193_194_49&products_id=259 (http://www.atfspeed.com/store/index.php?main_page=product_info&cPath=193_194_49&products_id=259)
-
that seems like a really reasonable price
-
I thought so, comes with a milled down bellhousing also to fit in the supra tunnel so im hoping tunnel/fire wall modifications are slim to none
-
Damn $2500... thats more then I have into my crx.
-
Damn $2500... thats more then I have into my crx.
Or about a 1/4 of what it costs to build a race transmission for a diesel, or a 10.5 car, or ect...
-
Damn $2500... thats more then I have into my crx.
Or about a 1/4 of what it costs to build a race transmission for a diesel, or a 10.5 car, or ect...
Shit a 10g diesel race trans might be lucky to even get a convertor and valve body with it lol.
-
its about 5,500 for a totally built 48re with billet everything and triple disk converter
-
its about 5,500 for a totally built 48re with billet everything and triple disk converter
Sounds like a solid dd transmission, a 48re that will hold up to 9.51@149mph at 6800lbs, and then go sled pulling the next day is a little more money then that.
-
been a while since i updated this thing just been waiting for parts but here is what i got going so far
adapter plate showed for the t4oo
Missing link
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2Fimagejpeg_2-5.jpg&hash=9f4ec9614d97d48be4184582da08967b6e854733)
stealthmode thought he would try rwd out
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMG706.jpg&hash=512193f4f451a54185c4c989a665da32d8a57caa)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2Ffacebook_-1058673895.jpg&hash=d72b5b1c03c602fd10275a38af18983d82827fea)
-8 an trans cooler with thermostat switch for the fan
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2Fimagejpeg_0.jpg&hash=8e68f141e68897cd90c7c5cbcfc747c36bef2c49)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2Fimagejpeg_2-4.jpg&hash=3155e6749b034a7c4de56245e8553cf1d0424109)
also swooped a nice set of cf fenders just cause they were cheap sad thing is i think there heavier then my stock ones, oh well ill just have to drop a deuce before i race to make up the diff
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20121006_171425.jpg&hash=729dba5dde1b84449b2fe24723cb44b792fd8b79)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20121006_171410.jpg&hash=d9fc8cf795a69217134e7b76f41e0a37e78b193d)
had a exhaust made for the street runs cause open dp is dope but loud as shit at 10k
Only exhaust pic I got right now single 4'to duel 3' all stainless with vbands
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2Fnew8.jpg&hash=3c636e763fdf6990419f46a98e4eef228b783531)
picked up a 1000hp intercooler also, shits crazy on the car takes the whole front end up you could rock it without the bumper and shit looks way good
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20121112_163722.jpg&hash=eb6a9647e9d5515e85b7e985c5a2f5b9ff1eb4d2)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20121112_160620.jpg&hash=4fb19aa2300e8c6013c519399b4c11a02c59c06a)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20121112_160613.jpg&hash=78966e65a3d36246f7a1f88655636f08b6143981)
last thing i need to get this bitch in and done is flexplate and for atfspeed to finish my torque converter. i ended up going with a 5200 stall 10' and got a guy to make the flex out of billet as soon as the converter shows so i can take a few measurements for
it should look like this when done
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2Fsupraflexplate1.jpg&hash=75da2de84d980ab58d67e95373381244e24ced00)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2Fsupraflexplate2.jpg&hash=592c6df6c0963285b63da19ba411aca478fabb5f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2Fsupraflexplate3.jpg&hash=c919fba2ed843d1e819d2edc94122f0241cb25b1)
thats about all for now im waiting for some more shit to show up so ill keep this up to date as shit shows, i only have my build here and mine and stealthmodes forum
-
that intercooler looks badass!
-
Should work
-
should we move this to open forum?
-
your call. ill move it if you want.
-
We can move it maybe it will give the rest of the site some thing to look at
-
done. now edit the first post subject line? :-*
-
sexy im currently looking for one first mod will be turbo and rear end swap
-
DO WORK!
-
Doing it ;DDD
-
nice!! it's still runing on block stock? :o
-
Ran up untill I parked it for the rebuild, might sleeve it still kinda up in the air (funds) but ill see.here is a intake manifold fbm designed for the s2000 chassis that we are testing on my car here is tbe plastic fitment piece real one should be here shortly
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2Ffacebook_2125870699.jpg&hash=e5ca7aa0e37cee1c7805a09e33a7e9f8ef122a4e)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2Ffacebook_-1077956733.jpg&hash=9bb1571c1f5af6cde90eeaeed55f18689197ea6f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2Ffacebook_1185024560.jpg&hash=1512c72c597cdbac34ad93dd7710deea237d26b2)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2Ffacebook_-693190365.jpg&hash=f06e4049c085ddc1ea7b2badc7e4ee68c4d76cac)
-
Is that going to be cast or billet? Looks good.
-
Casted, should be a cheap option with good fi performance for the s2000 cause as of now there os not much out there for manifolds
-
wow! how it's made in plastic one? :o
-
wow! how it's made in plastic one? :o
Cmon Walter...................3D printer, lol
-
transmission showed up today at fbm,so stealthmode thought he would try rwd out
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMG706.jpg&hash=512193f4f451a54185c4c989a665da32d8a57caa)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2Ffacebook_-1058673895.jpg&hash=d72b5b1c03c602fd10275a38af18983d82827fea)
-8 an trans cooler with thermostat switch for the fan
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2Fimagejpeg_0.jpg&hash=8e68f141e68897cd90c7c5cbcfc747c36bef2c49)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2Fimagejpeg_2-4.jpg&hash=3155e6749b034a7c4de56245e8553cf1d0424109)
-
Torque conver finally showed up (6200rpm stall) and also my freshly sleeved f22 from benson
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2Fimagejpeg_0_zps59e80542.jpg&hash=26d9b223d457c42fc1e17599cd73b0c85899501f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMG_0836_zps57c59564.jpg&hash=442561c0ef0588d80dd6cb6b930d6d0c0c142f9a)
-
Finally got every thing bolted together to get the backspacing measurements for my billet flex plate today, should look like this when done.kinda excited
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20130308_125241_zpse3df4066.jpg&hash=e9465a5e53e9b31cfeeef6c8815c9ebc4e70d399)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2Fsupraflexplate2.jpg&hash=592c6df6c0963285b63da19ba411aca478fabb5f)
-
ot all my head parts for my new head today so send that and the rotating assembly out and should be good to go in a week or so
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMG_20130311_104102_zps4f0701ab.jpg&hash=37aff932163092fbefcbe758f8c1e79242864850)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMG_20130311_101352_zpsccd1a1e9.jpg&hash=6042ec1f69346c2e1f9ebe95c4fccecfaaa4337d)
-
Found a little time to work on the car today, got the bay almost were I need it to be pass side tuck is done tomorrow I just have to do the driver side wires and she should be good to start running all the new brake lines while im waiting for my new head to get built and assembley balanced, got some diff injectors today also.the 2150's were almost maxed last year at 800 so yhese 3000cc should be judt what I need for this year
Heres a before shot
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20130326_105712_zps50a4f601.jpg&hash=0139655431512f8b483eaa52bbe350255f10dabe)
And this is how far I got today
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20130326_172510_zps952cdfdc.jpg&hash=d2ed0a9a40aad449a80a0758978f398e1b398f80)
Really the only place these all fit
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20130326_170031_zps9e4ac69d.jpg&hash=19ba58a75b727228d8c1316e105e600790e5cfe8)
Clutch pedal ? Aint no body have time for that
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20130326_170603_zps4c60a8ce.jpg&hash=4553a38e66fb7ac938f07953a78f00e0ddab0875)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20130326_171032_zps94a8b8c4.jpg&hash=189ceeb8b4a615b39f0b5e243c8aa4921a833d53)
And my injectors if 3k aint enough they are upgradable to 5000cc lol
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20130326_180448_zpse3e9e4ce.jpg&hash=3bfdde2e1e95bfeff37eea80fc18da3aa7d34be0)
-
ot the tuck 100% done today, cant see a single wire in the bay test fitted my cf fenders also seen to work good all ready to start test fitting trans/engine next
Before
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20130326_105712_zps50a4f601.jpg&hash=0139655431512f8b483eaa52bbe350255f10dabe)
After
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20130327_140711_zpsba4d346e.jpg&hash=1fc57a7d91a4613e31975899102c94adbe874f97)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0472_zps4c7d940b.jpg&hash=845150a9fb3db97f24958c470506cd5f7c4932fe)
Not sure if this is what they ment by white power lol it will work though
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2Ffacebook_818234902_zps433ff51c.jpg&hash=29426e7cb702cd7b65808c07484a545bf16ec63b)
And the start of my cluster setup
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0473_zps3cb5ce1d.jpg&hash=d9d5cb4933b9ff8bea3cb746406f7d15086e9a87)
-
ell wavetrack lsd for the 8.8 showed up so I got it installed today and got the back lash set also finished up my cluster and down pipe yesterday, gonna test fit my engine/trans tomorrow if I aint working then if all clears with no issues im assembling my engine sat
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20130401_111949_zps8203dd70.jpg&hash=0e7d2b070fe8a96926425ae227e641398f8c22bf)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0475_zps775df134.jpg&hash=7031f00ac20fb41003ffeceafae369f7ee8b84bd)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20130401_112150_zps88a51ef0.jpg&hash=a5028dce75677a7a0af574b2e19b02cc627cb6f1)
-
Didn't have to work today so I pulled my car out of halfblown and got it in to fullblown so I could get this trans test fitted and get the mount made for it. turned out well though nothing my 2lbs hammer couldn't solve for me lol also got a pass side harness for my pass so they have a little piece of mind when we out on the streets and my revised mounts showed up also
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20130402_101734_zps5942abbc.jpg&hash=c6f241889ee18d679dd9bfcc3e84a00b1cdbd91b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20130402_120326_zpsdc8bda15.jpg&hash=a81ae30b3d3f402738ee2e9b2395a015f37e7035)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20130402_144304_zps5e522ea7.jpg&hash=9278004113e3338c0fd6fb28f352473f3eedc9ea)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20130402_141153_zpsdde8ab07.jpg&hash=4e905172c29d39247992779f4e14d53eff187817)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20130402_140653_zpsc5512487.jpg&hash=aaeba0a4fb0def56dcfc88fee11c0030902ada11)
-
been a while since i had time to update this thread so if the words dont make since fuck you pics explain it all
-
This thread delivers :noel:
What is the goals this year?
-
Should make more power and be faster im thinking, well thats the plan anyways
-
Should make more power and be faster im thinking, well thats the plan anyways
Like what 1/4 times or mph you going for?
Do you have to build to the 10.5 rule?
-
I have been wondering about those Moran injectors. Supposed to atomize better than others.
-
Car ran a 10.2@135 last year at mid 500ish hp and I was shifting 3rd at 4k after I noob shifted it, but there are cars with the same builds running 8's with the setup I had last year I just had to ditch the manual trans after I had to drop 3k to rebuild it so when I got it back I sold that slut asap and started on this t400 swap figured if the 1000hp supras use them ill give it a shot also,but should run atleast low 9's this year without to much fuckin around
-
looks fucking sick
-
Car ran a 10.2@135 last year at mid 500ish hp and I was shifting 3rd at 4k after I noob shifted it, but there are cars with the same builds running 8's with the setup I had last year I just had to ditch the manual trans after I had to drop 3k to rebuild it so when I got it back I sold that slut asap and started on this t400 swap figured if the 1000hp supras use them ill give it a shot also,but should run atleast low 9's this year without to much fuckin around
Badass :noel:
-
Shooting for 1000hp?
-
Ur the man 8)
-
Thanks
-
Custom sfi certified billet flexplate finally showed and thats all I needed to get this slut up and running boo ya
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20130410_122831_zps456bbfeb.jpg&hash=72d086cb6867ea02bfc064704010cbf2a8be9720)
-
Do WeRk niggugh!!!
-
Word nucka lol shouldn't be long at all
-
Didn't have to work today so though I'd get caught up on a couple thing also had my manifold and damper show up
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20130523_085035_zpsa6bb1127.jpg&hash=3e625e69dd16c384777768d204e7bf0ba2833f36)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20130523_091305_zps381ac46b.jpg&hash=41b89147d2f12f0b6ef9f837f6f71970487a2db2)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20130523_113317_zps9000d05b.jpg&hash=2687bca24a0e7d0bb6643fe9ca7ca10d27635c16)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20130523_120346_zpsb24b637f.jpg&hash=2ea28e041355a95043721e9f620000dfe121ac70)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20130523_124548_zpscbb298b9.jpg&hash=c6006140df4e4bfd1c6118892e5d02f7153a398d)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20130523_125345_zpsa3083199.jpg&hash=e932fd0c6d2710c552cec42277f758d3ab79e2e4)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20130523_140031_zpscc0050d1.jpg&hash=5c76a6b260ddab286d6fb33da1d152132e91aaa9)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20130523_142132_zps94e52040.jpg&hash=b6c3661e87040898cbdbac483305094ec6c75ae5)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20130523_144134_zps76883e87.jpg&hash=2c12c308156ef86fe4df7fcca250e5a5a50f7343)
-
Boss!!!!
-
Looks awesome. When's it hitting the track?
-
SIck Niggle
-
it run yet?
-
Waiting on my mounts to drop it in, got some 88a hasport coming then have to make the manifold for the 4272r bizz then every thing else is not very time consuming
-
sweet, Want to see rippers..
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMG_20130601_120700_zpsf4b4ad5f.jpg&hash=ca237ef5f15d67ef10c2739d86a1b0e00daa6641)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMG_20130601_120856_zpsab6afa3d.jpg&hash=b751e30d74ba2f1c637986c6c2a78602b71491dc)
-
Baller!
-
Im curious about the lack of a flexplate... The billet adapter looks sick, but was there any mention of possible issue from NOT having an actual flex plate?
-
High hp diesels and converted 2jz's run billet flex plates so I see no reason why I can't
-
Just curious... I know why Convertered cars run them, just wondering if there were any possible downfalls of not...
-
Only issue with billet flexplates is that there is no flex, and the trans pump tends to push on the engine thrust bearings increasing wear substantially. In the race truck we only get a season out of the thrust bearings. We have now gone to a laminated flexplate to try out.
-
Only issue with billet flexplates is that there is no flex, and the trans pump tends to push on the engine thrust bearings increasing wear substantially. In the race truck we only get a season out of the thrust bearings. We have now gone to a laminated flexplate to try out.
Thats what I was getting at... I guess if youre gonna tear it down every season, or stay on end play its cool... Sure looks pretty Jake ;)
-
She comes apart every year always, these ain't no 350hp cars lol
-
I try NOT to be taking my entire motor all the way apart ;O) Every few years she does it herself anyways LOL
-
Lol touche sir, I've never in 14 yrs of this made a inspection hole lol plus I live in mn and winters are long so I have nothing but time
-
I want to see some wheelies!
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMG_20130705_154622_zps62366b1e.jpg&hash=daed47d9f50c6e9595fed66227f2458b3b4b2eb5)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMG_20130621_132416_zps1b7047c1.jpg&hash=093d075b72200bff8d72ab2f3a13b263009b0715)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMG_20130621_103122_zps2a476d9f.jpg&hash=dc2adb8792a9d227443094bf5efdd3d142178bf6)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMG_1416_zps90bf9368.jpg&hash=4bf19e4f1256076582afd44896730ce38f62817d)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMG_20130629_144606_zps17b691c1.jpg&hash=4e6333747442418528af2ff0b207daa101fc7c88)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMG_20130704_163752_zpsa3b0f987.jpg&hash=0bc82fdc639716210d72aabdf3020f10b78fc50f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMG_20130629_132556_zps5d6af52d.jpg&hash=81f818b8bf992003e030464fa65c7d980ab677db)
-
Totally Baller!!!! :noel: :noel: :noel: :noel:
-
No more twin scroll?
-
No more twin scroll?
that was last years baller. v-band is baller this year ::)
-
Was no room for the gates and turbo so needed to go dingle, plus I doubt she will be running low boost setting to often so shouldn't need it for control
-
Was no room for the gates and turbo so needed to go dingle, plus I doubt she will be running low boost setting to often so shouldn't need it for control
Not for control but for power. I made a good amount more with the twins.
-
Ill just add more psi if I need more power lol there literally is zero room for two with dump tubes and plumbing
-
Totally Baller!!!! :noel: :noel: :noel: :noel:
thanks, just trying to do it right the first time this time lol
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMG_20130807_143747_zps777dced6.jpg&hash=735b06c9a35798a3c754024512720dea428024c8)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMG_20130807_162140_zpsb5ebc82d.jpg&hash=445374634e00d950261aba772f65862f35ffed8f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMG_20130807_162946_zps5eb97ce8.jpg&hash=9c9a0c7ec1426d5560fbd6432afc7aa6e6e61b2e)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMG_20130807_181919_zpsab389860.jpg&hash=de0db660e9e22d2869bf7b223b20356e0eb593b6)
-
All this money spent and no pics of hookers and blow?
Worst build thread, ever.
-
I'm all out of money for hookers and blow, I just rub one out after taking my pre workout.sacrafice for drag car
-
All out of money for hookers? Roll through the trap in this and you'll have to pay them to leave.
-
Sounds like a solid business plan 8)
-
Any updates?
-
Any updates?
x2 just read through the whole thread and would love to see some new videos of this thing ;DDD
-
About time to start this fucking thread back up,finished the car, broke it in mid 800's on the auto took it to the track bit did not run last year being I needed a little spray to blow up to the converter on the trans brake,got the kit now just waiting for snow to melt for re tune and rippers
URL=http://s415.photobucket.com/user/hatchbone/media/Screenshot_2013-10-11-06-15-26-1_zps4ff7405d.png.html](https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FScreenshot_2013-10-11-06-15-26-1_zps4ff7405d.png&hash=e0edb67fb86f243e2c543965a8c5839cf6991ef1)[/URL]
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FScreenshot_2013-10-11-06-15-32-1_zps28f755a1.png&hash=889cc2155619f44e1b584070743891b2e91fcd8b) (http://s415.photobucket.com/user/hatchbone/media/Screenshot_2013-10-11-06-15-32-1_zps28f755a1.png.html)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FScreenshot_2013-10-11-06-15-42-1_zps190e1037.png&hash=38894c66e224c5f2b23c235083f87c9fa26d592c) (http://s415.photobucket.com/user/hatchbone/media/Screenshot_2013-10-11-06-15-42-1_zps190e1037.png.html)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FScreenshot_2013-10-11-06-15-50-1_zpsbf9a7384.png&hash=12ed4c8fd00e074c10d17a48c525e1e95783269e) (http://s415.photobucket.com/user/hatchbone/media/Screenshot_2013-10-11-06-15-50-1_zpsbf9a7384.png.html)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FScreenshot_2013-10-11-06-16-00-1_zpsf5f5ef66.png&hash=6f0bce4e1ad471e385d20ebc1f826aed75352672) (http://s415.photobucket.com/user/hatchbone/media/Screenshot_2013-10-11-06-16-00-1_zpsf5f5ef66.png.html)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMG_20130807_162946_zps5eb97ce8.jpg&hash=9c9a0c7ec1426d5560fbd6432afc7aa6e6e61b2e) (http://s415.photobucket.com/user/hatchbone/media/IMG_20130807_162946_zps5eb97ce8.jpg.html)
-
SEXY :noel:
-
RHMT porn right there :noel:
-
FUCK! :o :o :o :o :o :o :o
-
Fap
-
Long story short big hp and a 6200 stall found the week points last year lol here is the new one that's getting cut hopefully she doesn't twist this one off or else I have to build one of them with a steel ring around to bolt the converter to, couple before and afters of the struggle
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMG_20140307_131020_zpsma96lesj.jpg&hash=7fd368c989e24f27e8324fa3f0cc1fbab46b651c) (http://s415.photobucket.com/user/hatchbone/media/IMG_20140307_131020_zpsma96lesj.jpg.html)
-
Sweet!!!! :noel:
-
Hope it works cause I really don't want to add a shit load of steel for rotation purposes
-
Any updates on this? :noel:
-
Any updates on this? :noel:
x2
-
Any updates on this? :noel:
x2
x3
Been a long time since he's been on the site.
Last Active:
April 13, 2014, 02:09:09 PM
-
So here it is, I built what I thought was gonna be the best thing since sliced bread in my s2000 being the th400 transmission for drag setup bit after twisting converters off billet flex plates x3 I figured there is no way to hold that 45psi at 10k rpm with that setup, so I was left with two option one spend another 5k and get the car back to manual or two sell that engine and get something that bolts up to my drive line with no issues, I chose the ladder and acquired a lq9 to build and a s480 to feed that bitch so here is the start of the hatchbone s2k v.4
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMG_159485526490301_zpsnxpdqi32.jpeg&hash=30efce97364f8221389d2d51db45755fd5d32132) (http://s415.photobucket.com/user/hatchbone/media/IMG_159485526490301_zpsnxpdqi32.jpeg.html)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20141012_213253_zps7mdchbph.jpg&hash=2605b15d9812ab6d61ab2a594858f0d5a21db32c) (http://s415.photobucket.com/user/hatchbone/media/20141012_213253_zps7mdchbph.jpg.html)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMG_2796_zpsbt6fagkx.jpg&hash=8d9cf937a2f320e23916eb5d2a20ee3fde93b157) (http://s415.photobucket.com/user/hatchbone/media/IMG_2796_zpsbt6fagkx.jpg.html)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20141025_184223_zpsaxrqxlry.jpg&hash=cdddd02624f46df6e021ff29d1a82f57f8770a36) (http://s415.photobucket.com/user/hatchbone/media/20141025_184223_zpsaxrqxlry.jpg.html)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20141025_192043_zpsqkvwj22q.jpg&hash=a4f2661eba9ef2d36bac174feffb003c95124081) (http://s415.photobucket.com/user/hatchbone/media/20141025_192043_zpsqkvwj22q.jpg.html)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20141026_141423_zps7ygrktwi.jpg&hash=f11968a092c04b3075eec0de1bece776488f9ab1) (http://s415.photobucket.com/user/hatchbone/media/20141026_141423_zps7ygrktwi.jpg.html)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20141015_185305_zpsowmbor7a.jpg&hash=6f34474b428b040065c4452a4c38362e19fe6e45) (http://s415.photobucket.com/user/hatchbone/media/20141015_185305_zpsowmbor7a.jpg.html)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG1379_zpsuc4pxs30.jpg&hash=b57f76f2d72efb39174811501cfab0331006a4f9) (http://s415.photobucket.com/user/hatchbone/media/IMAG1379_zpsuc4pxs30.jpg.html)
-
Holy Shit this is going to break a lot of Hondaphile's hearts.
I'm liking where this going, please keep updates coming. :noel:
-
Too bad for them?
Did you end up trying the steel flexplate? I'm curious if it was the lack of any flex or if the power pulses were too spaced out (being a 4cyl vs 8cyl). 3 mounting tabs really isn't much when you think about it, so any extra shock between power pulses could take them out that much easier.
-
Steel just would have been to heavy imo I tried lol all I can say really. It worked great for street driving but trans break/launching twisted it off every time oh well v8 hotness should be fun and I really dont care if I piss honda folks off this is gonna be awesome .
-
awesome. ;DDD
-
Fap worthy. Best honda upgrade ever.
-
Just badass!
-
Thanks, keeping the short block stock minus studs and gaskets we will see how far it can be pushed
-
Nice, what ems are you going to run?
-
I have my haltech ps2000 thats in the car currently along with my racepack so I ordered the ls harness from haltech so I just have to load the map and go
-
Oh fuck ya knee grow. Keep this updated please
-
Thanks, keeping the short block stock minus studs and gaskets we will see how far it can be pushed
Open the ring gap some.
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20130523_124548_zpscbb298b9.jpg&hash=c6006140df4e4bfd1c6118892e5d02f7153a398d)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20130523_125345_zpsa3083199.jpg&hash=e932fd0c6d2710c552cec42277f758d3ab79e2e4)
I know it's a little, late, but it looks like there are a few ways you could have made that billet flex plate considerably stronger. Better luck with your lq9! Lets see some wheelies!
-
That was the first plate I busted, I had two more cut that were full circles and it always cocked the bolts sideways and eventually tore the threads right out
-
Kool you are in the RHMT news :noel:
-
That thing wasnt a true flex plate and the bane of hyour troubles.
I knew it would be...
Im glad youre going away from it
Shits gonna be sickkkk./
-
That thing wasnt a true flex plate and the bane of hyour troubles.
I knew it would be...
Im glad youre going away from it
Shits gonna be sickkkk./
My question, why couldnt it be made from steal?
-
Tight
-
It would have been way to much rotating mass with thick steel plate th400 and converter, that was my thoughts any ways. Supras run billet plates same with big tq diesels. I failed though
-
Diesels run billet steel flex plates, and those are a bad idea as they don't actually flex and wipe out engine thrust bearings. We run a laminated flexplate in the race truck.
-
Is Team Ballistics sad that you are leaving them for Team Heterosexuality?
-
Nope lol
-
Mounts turned out good
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20141101_110105_zps9wj0xews.jpg&hash=ad58f0cf4b8ec6836edb354bc3575d608ad86b6b) (http://s415.photobucket.com/user/hatchbone/media/20141101_110105_zps9wj0xews.jpg.html)
-
Looks beefie!
-
Should work nice being these use my f series hasport lower mounts that are bolted to the sub frame
-
Mounts turned out good
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F20141101_110105_zps9wj0xews.jpg&hash=ad58f0cf4b8ec6836edb354bc3575d608ad86b6b) (http://s415.photobucket.com/user/hatchbone/media/20141101_110105_zps9wj0xews.jpg.html)
Water jet? Looks nice.
-
Yes sir
-
It's funny how the LSx always seems to fit everything.
BTW: http://www.hotrod.com/how-to/engine/hrdp-1109-stock-gm-ls-engine-big-bang-theory/ (http://www.hotrod.com/how-to/engine/hrdp-1109-stock-gm-ls-engine-big-bang-theory/)
-
I have to move my steering rack forward and trim up some of my frame rails to get it in, dont mind though should be well worth it at the end
-
.
-
Any updates HatchBone?
-
March 29, 2015, 06:43:45 PM
been s while since he has been here...