:::RHMT::: Real Home Made Turbo
General Category => Forced Induction => Topic started by: crxvtec91 on May 14, 2009, 06:12:03 PM
-
Ok so I will slowly post up the history of my crx.
As of 06/28/2005:
the z6 blew n/a.Long story short happened last wednesday when it was raining like crazy, goes through a huge pothole that is up to level with the hood which is unavoidable, water goes in and pics speak for themselves.
Opens hood to find this :shocked:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D526126&hash=b819350c66084cf5f2726d8aca2d07a6eae8ef05)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D526127&hash=04fcf55bbe8bab5ca2088bc2fc62ec23af4aff5a)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D526128&hash=2d6746d2471d9d571e057243bae738af058d25e3)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D526132&hash=e7617a796ab857e3ecfbf53cd73b8d52a2aa72d4)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D526133&hash=4665acc7a37c925da5a99c712bdf826bd139e0f1)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D526134&hash=7686dffb4fb8748f88ecf16da8014cb0e49a66c1)
-
nice open crankcase breathing system you got there ;D
-
Four cylinders are over-rated. Three is underdog and the only way to go.
-
Dayum it hydrolocked so hard that it blew the head right off.
-
Lol steve.
-
good work. ;D
-
JBWeld :D
-
Lol steve.
Ahh you should have seen the way I finish it off :evil:
1st gear 6.5k drop and held the burn out for a few min, shit was knocking and only running on 3 pistons for a while :noel:
-
I was just a bit mad can you tell, had to have some fun with the hammer :yes:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D526135&hash=062c25db697f74112cb8358acff2588daed37724)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D526137&hash=50fce9cabe4b40f9879243b6b01b5a6ac2aa5da6)
Nows it's on the floor
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D526141&hash=b910e9fe6d57f8908f214995e75ecfe24c843f61)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D526142&hash=c86f0de7029b16bb6d58d98439e4d6daddd298e9)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D526143&hash=7fc9b8be8a880bded59ac1270d2fc72969ee13e8)
-
Cant fault you for the ford wrench man. Ive done that myself to dsm's before. Sometimes its necessary.
-
hope smashing it made u feel better. shit sucks.
-
hope smashing it made u feel better. shit sucks.
It did a bit :noel:
MORE PIC'S!!!!!
06/28/05
its out :smile:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D526145&hash=e6c132c46e701e19dd11edc86644ab5df556024e)
it's kind of hard to see but the oil pan is bulging out a bit
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D526146&hash=bb1e10daec969fa083681765ba59edb5e1ee9f71)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D526147&hash=88cbd9b3e19f754b853571c3f433e95501d85e73)
oil pan removed and found this
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D526148&hash=f5b7dac26c2ee42663e50f14d5fc95c72e0efb5b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D526149&hash=95191c4fb1f3be404f4e723ce677526ba7f2e806)
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.filehurricane.com%2Fviewerthumbnails%2F530200824330PM_fleshwound.jpg&hash=e5055d50ab4e1337e35b6b49c37b09315762c7a8)
-
MOR PIC'S!!!
Seems like connecting rod decided to rip through the block and leave the the rod cap and #1 piston in the engine
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D526150&hash=6bdac3d2f2b4dacc82e8e63097bb6a36889290d8)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D526151&hash=e5a68157b227cb273dd7b7b0a2ae61bf96a454a8)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D526152&hash=44f4850b1592af9495d3ee709b2d32cbffb15683)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D526153&hash=6dfce9498a44e3e5179d4d6cc6da87a2e112b953)
-
Nice work :noel:
-
holy fuck. That is some of the nastiest crank fuckupery
now put it all back together and turn that shit on so we can hear its crunchy goodness :yes:
-
jb weld over the intake runner on #1, pull the injector clip, and boost the shit out of the other 3 cylinders :evil:
-
the a6 motor goes in
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D526154&hash=5f60c52e665a913f0404f04bfac727fb00665f4e)
the a6 trans gets mated with the a6 motor
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D526155&hash=6600ac7a4841bc7074795ca25d40d3ef279e87d9)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D526156&hash=a854f3e2b2dc5b067c5e9914023c1d8d58775f9f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D526158&hash=022aeb6c1c9233cb4d8070ca65076ffba7bb21bf)
-
Then came this in: 08/26/06
since last time i posted i went through 2 mini-me's, the d16a6 minime blew up due to oil pump messing up sorry no pics, and the d15b8 minime piston rings was shot in the beginning and lasted 2 weeks of taking it 8200 rpm with the obd0-obd1 conversion running uberdata gsr maps. After the 2 dead minime's i decided on getting the jdm zc vtec. id must admit that the zc pulled harder stock than my z6. After a few months of daily driving and ripping hard it started becoming slow, so i decided to boost it.
setup
hf mani- free
bmc race adapter plate-$50
dsm 450cc inj-$10
s13 t25 turbo-free
blitz bov-free
oil lines-$15 home depot style
pvc chage pipng-$15
Pvc black paint-$5
lsd motorsports 6 puck sprung street disc clutch-$275 shipped
sunpro boost gauge-$15
chipped p05 ecu with uberdata with untune basemap-$25
evo 8 front mount-$10
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D937498&hash=34d6cf63607496f25ea00fbdbc8405219a1558f4)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D937499&hash=18657198d40293f095186c5fb35d350b500da766)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D937500&hash=719ab6afe1f10974818114d0a1a81b16813a445d)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D937505&hash=122f6a60711ea69b3b36e4b226533323ace81924)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D937506&hash=78efe9c35309a83b06ad1da304377b347300dfe6)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D937507&hash=3565aefef41661d057a67319f114bcfdff6845be)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D937509&hash=7eb260c0da089812dd633f39027ed35ce1dd805a)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D937510&hash=42403c014c77b3b8601186aeb3bb654f9ae20381)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.pix8.net%2Fpro%2Fpic.php%3Fu%3D1679m3ty6%26amp%3Bi%3D937515&hash=d53d7e55a19f07ae4d92335d9186c39c7649c880)
-
Only 2 vids I have of it;
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fth_MOV00045.jpg&hash=35cf5c1fb4afa4244fea83de9d8714ed37c306e9)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fth_MOV00049.jpg&hash=9252c43f57f7379ef00b6d1967f6863d90f214d1)
-
Only 2 vids I have of it;
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fth_MOV00045.jpg&hash=35cf5c1fb4afa4244fea83de9d8714ed37c306e9) (http://s105.photobucket.com/albums/m223/preludevtec95/?action=view¤t=MOV00045.flv)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fth_MOV00049.jpg&hash=9252c43f57f7379ef00b6d1967f6863d90f214d1) (http://s105.photobucket.com/albums/m223/preludevtec95/?action=view¤t=MOV00049.flv)
link not working
-
^^^^ Not sure I can see them just fine, try these.
http://i105.photobucket.com/albums/m223/preludevtec95/th_MOV00045.jpg (http://i105.photobucket.com/albums/m223/preludevtec95/th_MOV00045.jpg)
http://i105.photobucket.com/albums/m223/preludevtec95/th_MOV00049 (http://i105.photobucket.com/albums/m223/preludevtec95/th_MOV00049.jpg)
-
ummmmm link failure number 2 :'(
-
ummmmm link failure number 2 :'(
One more time:
(http://s105.photobucket.com/albums/m223/preludevtec95/?action=view¤t=MOV00045.flv)
-
(http://s105.photobucket.com/albums/m223/preludevtec95/?action=view¤t=MOV00049.flv)
-
Why the weird reving in the second video? Slipping clutch?
-
Why the weird reving in the second video? Slipping clutch?
Slipping super bad :P
-
That's what I thought, mine was slipping and I was doing the same thing lol
-
The came this;
02/11/08
Setup
B18b block/b16a head
hx35
Intercooler<---thanks Ajxr
Arp headstuds
Innovate motor mounts
Type-R trans with spoon lsd
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2FFrontsideofengien.jpg&hash=6490915f550535603446c900169ef6ad42ccd2f4)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2FSidepicoflsvtec.jpg&hash=b57925e27ac7d5bf7f012a6a2de6c23681f1c6b9)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2FHx35withintercooler.jpg&hash=6f5280a14f9a91da9c251e53b6d1a0519325f8be)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2FIntercooler.jpg&hash=482a2f13cbc2ad30cfa6ec4bcc5973897d993665)
While I was at it I also did a full wire tuck;
Let the pic whoring begin lol.
You will notice that I am removing the dash because I will be routing all the sensor wires through *Drum rolls* the speedo hole.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Finteriorstripped.jpg&hash=cb60eab0e9d945eda4e3788f04a1a88176bfd5e8)
Cleaned up the e-bay by pulling the wire looms on both sides inside, as well as spraying a bunch of purple power to get rid of all the grease and oil that was caked on over the years. It will also be painted and will take pics of the end result.:)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fe-baycleanedup.jpg&hash=63a697a4018d569aa8d6da710838fbb694503a2c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fe-baycleanedup2.jpg&hash=0817988caf511c659b754b9c170ee82fad1c09fc)
My bro cleaning up the last bit of it...
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fcleaningupsidefrontofebay.jpg&hash=542b7a7e61531d008b19fed0fc2cc9c9638b1e03)
I will have more pics tomorrow of the mounts that just arrived yesterday.:TU:
)4/14/08
Here are the mounts. I should probably be installing it maybe this weekend once my e-bay gets painted.:TU:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Finovativemounts.jpg&hash=0b7c523de316d8e784c3edf16f92d1fe699695ca)
05/23/08;
Update: I got through with tucking the drivers side but don't have any pics because I can't find my camera, I know I failed. Although I do have some pics of how the e-bay turned out with the new paint before the tuck.:TU:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fpaintede-bay.jpg&hash=dd64e4558aea9ddc8ee0f01fde4cc8c2f5823987)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fpaintede-bay2.jpg&hash=c73966fb14161200559fda2d457928dcbb5d6403)
Ebay catch can
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Febaycatchcan.jpg&hash=66a8408c5199f87464149ee9d12af5fcb4f59e2d)
Here is how my interior is looking which is a mess
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2FDashtakenout.jpg&hash=f0058f63f12caa15a28011a02d135b1c18e5f2a6)
I still have to get the passenger side tuck, followed by sending the sensor plugs with wires through the speedo hole. That will be for another day.
05/24/08;
Well as requested I finally found my camera and here are the pics.:TU:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fdsinsidetuck.jpg&hash=3209d4a3935e7dd0fe703b5e9edf344131146624)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fdstuck.jpg&hash=89684a22ac834cd66229b2c0d22ebe79ca8d32be)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fdstuck2.jpg&hash=04366de42656eefc591a26f8a29d2d247b012c61)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fdstuck3.jpg&hash=611750704c45b2ffbad3ab1588cda32c41f6e744)
05/29/08;
[SIZE="5"]Update[/SIZE]; One of the moments that you guys have been waiting for is here. Motor is in :bubbrubb: and well onto pics...:TU:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fengineprep.jpg&hash=4085bad0967f4745848af5960025b5fb66bd8cd9)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fe-baywithlsvtak.jpg&hash=09747a1fbc14fdba613fc3cb7e70abcb798a56ff)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fcabletohydroactuator.jpg&hash=291eaf6f266f907f3ee310167011a59697fbb336)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fe-baywithlsvtak4.jpg&hash=f1cf453287ddf19b8f3f83f5ea20c5f312cf4f76)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fe-baywithlsvtak3.jpg&hash=6245f23530026ec053fafff1ef24b0ca5e50c3be)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fe-baywithlsvtak2.jpg&hash=aa773f80fec5d8c7c8515f562d71980fb069df29)
What is left is to tuck the passenger side and pass the engine bay harness sensor plugs through speedo hole which I will be doing tomorrow. Then put the whole interior back together.
06/01/08;
Ahh if so then I will take it back, and will upload a pic of what I did yesterday and here it is....
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fenginewiringinspeedohole.jpg&hash=3db69e4e9214ab95a77aa9557c45e03208c7adcd)
As you can see all the sensor plugs for the engine is going through the speedo hole. I will be looming it there and separating some of the sensors into mini looms.
06/06/08;
Passenger side tucked.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fpstuck.jpg&hash=c91eea2fcd1e41a48b13ca96a606b00435fd9800)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fpstuck2.jpg&hash=8e0a154138aef71870c824d32c4147db15bd0c94)
Here are some of the shocktower plugs
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fshocktowerplugs.jpg&hash=749249bcd1ed0a4a6b494fb607c8ec73efdcdc66)
Random shot of the hood clearance and it is fully closed
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fhoodclearance.jpg&hash=921b77e4807fe1dd1d81e1080e752dbecded319d)
Shot of the turbo setup
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fturbosetup-1.jpg&hash=5b9f6fc2a0f5feedf43013f464fc2d13a9d589f9)
I know the turbo is not there in this pic
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fenginealmostdone.jpg&hash=9af182a86b0384ca17803e752c6c35edeffa9a24)
Here is the driver side quarter panel pic
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fqppics.jpg&hash=d5674a4923cd12159ea6b4b15d1535694205d8b3)
Passenger side quarter panel pic
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fotherqppics.jpg&hash=1b9b5a3952222344f9cb5c9280cec1f55bf2bc5f)
Well that is about it for the moment and the only thing that I need to extend is the injector wiring, put the dashboard in, and then start up......
06/21/08;
Well here are some pics of what I was upto the other day.....
The dash is finally in.....
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fdashboardin.jpg&hash=8ddb93f909648970adce26da3652427bc92a0b5a)
Here are some pics of my front bumper that I decided to paint to the stock color scheme...
Before
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fupdatedcrx2.jpg&hash=81aa3b6a6876e2c3c5b216dcc8dacce403b2c89d)
After
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Ffrontbumperon.jpg&hash=d8cf81a2aa995c0a594585952b37eb234ed00fe7)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fjdmshotofbumper.jpg&hash=1d7731872859b966d747a742dbafb2c8ff6615de)
Hmm I haven't posted about this but here goes. Not long ago I had traded my b16 lsd transmission for a gsr with obx lsd on it. Well the guy puts in b16 lsd and not putting the synchromesh in it, he was saying that whenever he turned it was clunking. So I ended up going to nyc to helping out the guy take my old b16 transmission and putting on the gsr one in. That night ended with the gsr transmission working flawlessly.
The next day, I decided to pull apart my b16 transmission to inspect it to see if anything was wrong. To my surprisement the transmission look perfect, it didn't even had metal shavings on the magnet. I proceeded to take out the differential to see what was wrong with it. As I pulled it out, to my complete amazement I found this.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fspoonlsd.jpg&hash=4395c92333106240aea39614c2ea1b7864e5c50f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fspoonlsd2.jpg&hash=0136da21ac6058711211e9c8277e98b0dc8eb652)
I know it is kinda hard to see it but that is a true spoon lsd with final drive. Bone I know you already seen it so keep quiet lol;) Reading up throughout all the different forums I came to realize that the piss thin mtf was the culprit; as a complete teardown of the spoon lsd was in good shape. Well enjoy some more pic's of me putting the trans back together; oh and my crx workbench.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fputtingtogethertransmission3.jpg&hash=ce17799ae7242d39cc2e45a2d403fac04f54e061)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fputtingtogethertransmission2.jpg&hash=03c8322de5775ad5219d33691241a355516281a2)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fputtingtogethertransmission.jpg&hash=5006f7462a4115fe0983d4cecd9d78ac000ad4f6)
Well I will probably be finishing up soon, just have to put the suspension back together.
08/02/08;
Update: Well it's time I show pics of how the tuck turned out and a teaser pic of how the crx is currently lol.
Wire tuck.:D
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Ffinale-bayshot.jpg&hash=9b60c33cf031f8db5d515609d36c0ff9dddcc7ed)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Ffinale-bayshot3.jpg&hash=f424e578f60fc1a0b5a03d8cc99d835f76b672ec)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Ffinale-bayshot2.jpg&hash=9db8370a621eac0639353c4da8001cff805e187a)
Teaser pic of the rex.:)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2Fcurrentstateofrex.jpg&hash=7079507c3e4f67839c6fcca5a63a3d0d11709a21)
So there it is and if you can tell there are no timing covers on it but will be installing it shortly as well as a new water pump........
SHE IS DEAD!!!! Update: On 3/27/09 I went to e-town to make 2 passes of 17.1 on drag radials (i know wtf). Yes I was preloading and launching at 8k. Both passes were under .200 for a reaction time with a 60 ft of 2.2. Decided not to make a 3rd pass as it was running kinda iffy. As I started to head back, halfway through the turnpike it started making a small ticking sound. Temp shoots up, oil light and cel comes on only for it to knock very loud. Two seconds later it shuts off on the highway so I decided to pull over. Tried to start it with no luck and even push starting didn't help. Sounds like a spun bearing and possibly seized it.
That did it for me as I'm now selling the crx shell and any parts with it and will make a fs thread soon. Now as I mention on the previous post I have a new project in the works. 91 toyota cressida with a blown auto 7mge that I will be swapping out for a 1uz v8 that I bought for a steal. Also I will be converting it to a 5 speed as well.:) Coming soon there is another honda project in the works so stay tuned.........
05/03/09;
Update to my 04-05-2009 update. When I blew the motor I was so piss I was about to quit and let everything go, in a since I could not. To many years, to much fun, to much joy has led me up unitl now. I started by pulling the fail boat B-series out in favor of a better setup. The all mighty D!!!! Yes thats right I said F the B and hello to my old good friend the D, as rhmt would put it FABLAD(Fuck A B Love a D).
So the build has started, last week I spent a nice about of money with fjt, so I should have some pic's soon. Its going to be a z6 with my hx-35. Going to build my own header for it using a ebay 4-1 n/a header, manifold will have 2 waste gates to take full use of the twin scroll.
For this year my only 2 goals is 300hp+ and to run a better then a 17's pass lol.
Stay tuned more WILL come!
-
More pic's to come!!!
-
More pic's to come!!!
A lot of your picts are gone stop signs w/ Xs ;D
-
More pic's to come!!!
A lot of your picts are gone stop signs w/ Xs ;D
Lol I think they hit the max number of views; might have to give it a few days :P
-
Should of organized your spark plug wires better after the tuck.
Good job though, now just hope that you didn't fuck up any wires when putting them together.
-
Should of organized your spark plug wires better after the tuck.
Good job though, now just hope that you didn't fuck up any wires when putting them together.
All works fine. I only did the wire tuck to try something different; will never do another one gain :-X
-
Yes I did sticked my own build :noel:
-
Yes I did sticked my own build :noel:
Steve you bastard. :P
-
Yes I did sticked my own build :noel:
Steve you bastard. :P
If you make one with your car ill sticky it :noel:
-
Yes I did sticked my own build :noel:
Communist.
-
Yes I did sticked my own build :noel:
Communist.
:noel:
-
After seeing your vitara record thread I'm glad you stickied you own build thread.
Either I miss something or I'm blind but I did not see a setup detail of your vitara build.
-
After seeing your vitara record thread I'm glad you stickied you own build thread.
Either I miss something or I'm blind but I did not see a setup detail of your vitara build.
Haha no vitara record is not mine, I wish it was :yes:
My setup for my build will be;
top mount mani
Hx-35
Ported z6 intake mani/ spacer/ 74mm tb
I am going to run a zex cam but maybe next year.
As of right now I am still gathering parts, thats why I have not updated my build because I really don't have much right now but a pile of parts.
-
want a bottom end?
-
want a bottom end?
I got all the parts to put mine together; just no time.....
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg30.imageshack.us%2Fimg30%2F361%2Fthrottlepr.th.jpg&hash=7a0403e303943820cac378391d86c420124c7c6e) (http://img30.imageshack.us/i/throttlepr.jpg/)
74mm throttle body+spacer
Ported d16z6 intake manifold plenum
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg16.imageshack.us%2Fimg16%2F8696%2F65mmplenum.th.jpg&hash=7e43c905e63599ef443dd7f89b68ad7162bd0571) (http://img16.imageshack.us/i/65mmplenum.jpg/)
-
After seeing your vitara record thread I'm glad you stickied you own build thread.
Either I miss something or I'm blind but I did not see a setup detail of your vitara build.
Haha no vitara record is not mine, I wish it was :yes:
My setup for my build will be;
top mount mani
Hx-35
Ported z6 intake mani/ spacer/ 74mm tb
I am going to run a zex cam but maybe next year.
As of right now I am still gathering parts, thats why I have not updated my build because I really don't have much right now but a pile of parts.
Any picts of the top mount?
-
After seeing your vitara record thread I'm glad you stickied you own build thread.
Either I miss something or I'm blind but I did not see a setup detail of your vitara build.
Haha no vitara record is not mine, I wish it was :yes:
My setup for my build will be;
top mount mani
Hx-35
Ported z6 intake mani/ spacer/ 74mm tb
I am going to run a zex cam but maybe next year.
As of right now I am still gathering parts, thats why I have not updated my build because I really don't have much right now but a pile of parts.
Any picts of the top mount?
I have a ton of pic's I have to resize. Next few days I should have a ton more pic's!!!
-
this is going nowhere haha common!
-
this is going nowhere haha common!
FUCK YOU :-* lol
Here we go;
New top mount
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2FDSC02322.jpg&hash=6a866114e91c0c553ece5a49905bbb1d3b99c1a1)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2FDSC02323.jpg&hash=7fd6ac5ffc98d1e71254421ad8c94c50f1f61c10)
So fresh and so clean
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2FDSC02338.jpg&hash=b22e78d9d8980efb2c65362e033155d99f81854f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2FDSC02337.jpg&hash=790a8c3cae6fd46b9ff6d23d4b97edb693733c91)
New welder
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2FDSC02336.jpg&hash=becd3a947054086883842d3cfc1fc0300a02c0e6)
74mm Tb+ spacer+ ported z6 mani
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2FDSC02335.jpg&hash=8def781c13bb47fe6cef5ede709ffd673ff9b922)
Another shot
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2FDSC02334.jpg&hash=5059b582bb76aba0e231dd3217dc7826ebd8514b)
One more
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2FDSC02333.jpg&hash=7429e03f1e5cf8a1313d7bc319ede72964e77355)
Hx-35 + top mount
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2FDSC02324.jpg&hash=3f5d9f2ce44d36e2885c494ea17eecb00be1d1da)
Hx + mani + 1 gallon
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2FDSC02325.jpg&hash=89192c1b1d07d463129b9d52fdb06365e1a6579b)
One more shot, now this is a real mans turbo!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2FDSC02326.jpg&hash=f398a55709c74602b773a72c92ce6177160e5947)
Lsd Mike FTW
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2FDSC02327.jpg&hash=8e410d7de21bc175737fc69942df4c51e622466a)
Rebuild kit
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2FDSC02328.jpg&hash=cd5b5b7703c4158e8e92c91071bf2c9e71f2b0b7)
Another pic of the kit
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2FDSC02329.jpg&hash=4643e147ff2c5132c0fd07eed2ca3bd8648fd5e9)
Last but not least everything
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi105.photobucket.com%2Falbums%2Fm223%2Fpreludevtec95%2FDSC02330.jpg&hash=6d9681546d3fbfd24eb3b1eda0452c5237a83316)
I know the updates have been slow, work will be even slower due to needing surgry. Also need to buy my cam and springs. This may be the last update for a while :P
-
looks good sir! shits nice!
-
looks good sir! shits nice!
Thanks, I got the block ready to through everything in, just need sometime.
-
Long live the D
-
Give your engine a 30 shot of juice , :-X are you tuning the car or xeno. nice parts :-X sorry to ask how made the manifold :-X xenecrone express
-
Give your engine a 30 shot of juice , :-X are you tuning the car or xeno. nice parts :-X sorry to ask how made the manifold :-X xenecrone express
Who the fuck are you?
I might put a 150shot wet. :evil: on top of the 35psi I plan on pushing.
-
Im a dick sucking noob
-
Im a dick sucking noob
Quoted for truth!
-
where did you get your exhaust mani?
-
where did you get your exhaust mani?
;D +1
-
where did you get your exhaust mani?
;D +1
Got it from a guy on the crxcommunity site, it was dirt cheap and solid as fuck!
-
More parts on the way, just spent about $700 on new stuff! Motor should be together in about 2 weeks!!!
-
More parts on the way, just spent about $700 on new stuff! Motor should be together in about 2 weeks!!!
Parts are showing up, hoping to get the motor together this weekend. Any one recommend what to gap the rings to?
-
For that im/tb setup, is there a step from the TB into the intake or is it completely smooth and equal diameter? i've heard that you should have a step from tb to im
-
Throttle body is a 74mm inlet tapers down to a 68mm plate
Spacer is a 70mm inlet tapered down to 65mm. The reason the spacer is 70mm is to not allow reversion to occur since most people will only port match to a throttle body size. There is too much play in bolting on a throttle body and you will always have the throttle body backside overlapping at some point.
The manifold is ported out to 65mm plenum the largest you can go before you crush into the iacv port. Thats is pretty clear when you look at the picture.
Also all Honda throttle body/manifolds from the factory come with a 2mm larger manifold opening vs the throttle plate size
For example:
b18b1 manifold has a 62mm opening but only a 60mm throttle body. This concept was transfered to my spacer since oem manifolds/aftermarket can only be opened up so large due to lack of material and also IACV ports
Essentially if your only gasket matching to the throttle body size on the manifold your doing it wrong. Honda knows what their doing just follow their lead.
-
i was going to do a skunk2 intake mani with a 76mm tb all ported equally, will that be ok? dont mean to thread jack
-
i was going to do a skunk2 intake mani with a 76mm tb all ported equally, will that be ok? dont mean to thread jack
pbt as i told you before
-
i was going to do a skunk2 intake mani with a 76mm tb all ported equally, will that be ok? dont mean to thread jack
whats a skunk2. I dont use their products and no I know for sure they dont have enough material to port that large. Again iacv port kinda gets in the way
Wanna know how large you can port it. Measure your inlet size. Then measure how much material before you crush into the iacv minus 1mm for sealing surface
There you go. That applies to any car/manifold ever made even magical skunk2 sohc manifolds that lose power ;D
Also who makes a 76mm plate throttle body for honda's?
-
Fuck skankshit, and there over price cdm shit. Pbt>cdm skankcrap
-
u sellin the spoon?
-
Fuck skankshit, and there over price cdm shit. Pbt>cdm skankcrap
YEA O0
-
u sellin the spoon?
Sold it a while back, fuck up the speed-o gear on it a bit. Was still working when it came out, but I sold it dirt cheap. If I remember right, I sold it for less then 100 ship.
-
I suck for updates, I need to stop being lazy and post some shit :P
-
keep us updated.
-
So I have a ton of new parts, just need to take some pic's and post up!
-
MMMmm new parts. Whaddaya got?
-
MMMmm new parts. Whaddaya got?
Arp head studs
Zex 59500 cam and springs
Aem cam gear
Thremal intake gasket
New wastegate
Last wrk injectors to decap and turn into 810'cc
-
MMMmm new parts. Whaddaya got?
Last wrk injectors to decap and turn into 810'cc
They are shorter in size, i just removed the fuel rail spacers and spaced them to the desired hieght with washers and shorter bolts. I also put a small o ring on the manifold side of the injector and it slid into the standard honda manifold injector orings and locked into place.
-
MMMmm new parts. Whaddaya got?
Last wrk injectors to decap and turn into 810'cc
They are shorter in size, i just removed the fuel rail spacers and spaced them to the desired hieght with washers and shorter bolts. I also put a small o ring on the manifold side of the injector and it slid into the standard honda manifold injector orings and locked into place.
Thanks for the info, have any pic's or this? Also what plug wires did you end up using?
-
Ok was getting the motor together today. Everything was going good up until I went to put the pistons onto the rods. For some reason the top of the rod is hitting the under side of the piston. The pistons have a bit of a hump to them, I started shaving the hump down to clear the rod, but the damn dermal died half way through the first one; went at it with a hand drill for a few hours and only got 2.5 done. Crank is in and thats it....
I guess tomorrow is another day :-\
-
Thanks for the info, have any pic's or this? Also what plug wires did you end up using?
ill dig up the pics I took (i was going to do a write up). I just used some wrx plugs off a dead engine we had at work, I think all obd2 plugs may be very similar because iv also used late model evo plug wires.
-
it looks great and congrats on those numbers.
btw, did your radiator panel come like that or did u have to shave some parts of it around the latch?
-
it looks great and congrats on those numbers.
btw, did your radiator panel come like that or did u have to shave some parts of it around the latch?
Ahhh what numbers?
-
I think I need to update this post. Shit load of pic's coming tonight!
-
01/31/10
The day started out with me going and picking up the rest of the little Bs I needed to get the motor together. Got a super late start because my friend is a lazy guy that almost didn't get up.
Driving around in my DD beater, car had been sitting for about 8 years then this past summer I finally put it back together.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0096.jpg&hash=1ec0e3cdbef8bcbfe8c91d47a96dd8900b0c038d)
My friend that slowed me down aka Arab money hahahaha
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0037.jpg&hash=bbfcb75d617335eb788abdbd4c63a4d0b76d7ec9)
Here he is running from the camera, what a punk he wouldnt let me get a pic of him. Not that anyone wants to see him.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0038.jpg&hash=40adb2b65ee4ec5261aebb070dde2e6fd251f11a)
A while later I had arived at my friends job, had to steel some of his tools.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0019.jpg&hash=37886cd2fd5c530ef60e703e7ff5b5ffb90d7d01)
The man has a shit load of tools, this is his baby box.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0015.jpg&hash=d329d01297f240d9c3a1f2a2f0fe8fc09888a96b)
Someone fail boat Sr power 240. This thing had some many things wrong with it I could write a book about.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0021.jpg&hash=a04e920ea093f3384a7e88ae14e44f0f71ae372b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0020-1.jpg&hash=690cab5d72e3fac52da40203873e797c2d36a8ac)
About a hour later we where back at Arab money house. Arab money on left, and my friend who I shall call the Man on the right.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0022.jpg&hash=a730485fa23b2dd4ad96bda744328270b9aa62bb)
Now here are some pic's of some of the stuff one needs to put a motor together.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0023.jpg&hash=def2a98d35ee0bc48bdf40730815d6eee4b26a8e)
I have some shalack indina sealant, red lock tight, green plasi gauge, Engine lube, and head lapping compound.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0024.jpg&hash=4568c6573f4c666b076064d68ed1c147151291eb)
Here are some of the parts I had got.
Zex/comp cam 59500
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0025.jpg&hash=af11e95da3eec7325b45b7700d3d6a9863f2a43a)
Aem cam gear.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0030.jpg&hash=b87e2b9bba2b3bff637e2e21deb08b124637b7cd)
No its not red.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0031.jpg&hash=5b898474b026116d6713fb0f002f886372de135d)
Arp head studs.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0033.jpg&hash=a1f88dca10f0f3338aaa8bee2b17113a648aa11e)
Zex/ comp springs.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0032.jpg&hash=40fe199683bc729591aa3f2a1bb5de9bf64707e2)
Next up the baller Chris M(Pbtuning) Ported Z6 intake mani+ spacer+ 74mm tb= ready for 400+ hp
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0026.jpg&hash=8698eb24281ad1366087dec4188635727b3e8abf)
The bling!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0027.jpg&hash=20247ed0f04d1003628042dd3e5554666549261e)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0028.jpg&hash=be3e6e336a112bbddb1d551fd3c945258f1980d0)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0029.jpg&hash=5fd1c497a67beb3ce7d708284c96e6ce3bbdf66c)
During this hole time my baby was feeling super lazy, then she ended up taking a nap. Here she is.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0052.jpg&hash=b75578dd0f28d0eac97e82efc394126f2cb5c2d7)
The man wasted no time and got right to work by first cleaning the mains.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0099.jpg&hash=c9f71585154ea19e55f261dd27e0a18e25ade311)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0100.jpg&hash=6f524b6a077009c73c5827f4ecaf43b4c5ce7d8e)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0101.jpg&hash=31b7fdc60d63fc5b67f8321d0455773dc6f7b4b2)
A bit of a mess.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0102.jpg&hash=f0fb44533414450f2cebb073d55b2eee913c06ae)
Here are some pic's of my clean up head.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0039.jpg&hash=e4f335455394aff83961e0c26a78cb6c6a9b4a0e)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0040.jpg&hash=6c6522732ed7865d1f9f399c0fb7fd3b26e98e8a)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0041.jpg&hash=c9ec7e8c95d410d80ab723603ad1aefde0aa2d16)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0045.jpg&hash=f924e3db5b3848ab27983ec19136109edf6a2cdb)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0174.jpg&hash=6cd725e3fb2eea3019f4b23afb7bc6964b21c18c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0175.jpg&hash=c056c7d7ad5cff03b26a9e08d8e0ac4c34ff4672)
I got to work by lapping the living hell of the valves.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0179.jpg&hash=8b2655d1de6f8509fad55492de27814a05bb2c94)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0178.jpg&hash=c085b83ff34ba3113665ca03634aad264ba62000)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0177.jpg&hash=1e68c72e2954a0bae6a259d904943d359e85b886)
Heres how the true Og's lap the hell of of valves.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0176.jpg&hash=f8bed569686d31ea4644baf92c2968c44340d9fd)
Back to the Man, here he is giving the crank a good look over.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0043.jpg&hash=9b296efea76ba1b152858081badaaa435e790b9b)
An the motor that I am building. Its a 9v9LD hahahhahaha no its a D16A6
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0035.jpg&hash=e739345fbbf598f6de9c4b9c0025964bf0a54730)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0036.jpg&hash=1dca91a9f6a866126bd5cf8b60082d9c381c6d36)
Around this time we started running into the first set of problems.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0141.jpg&hash=0db80310d569b5f5154e4ce7db785bdc4a70c5ff)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0142.jpg&hash=faf68408db6ac4b38107392924b3caf1d1752eef)
Here was the problem, the damn rest pin would not go through the piston and rod. The problem was that there was a hump under the piston that would not let the rod go all the way up. I ended up taking a dermal to the under side of the piston. This would have work great but the damn dermal thought it would be a good idea to crap its self and die. Good thing for HF, there $2 dermal did the job with out dieing.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0143.jpg&hash=c894c16bea21e812d9e9857971c783ce48e7f4ed)
By now it was time to check the mains to see if they where with in spec. But first the bearings had to go in.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0103.jpg&hash=a34c185876a5ddff5e470f1625ef17a3e704e180)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0104.jpg&hash=0a21c61fbf0cd3da361fee5d009f6783e3af5f76)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0105.jpg&hash=1fd5770b8dc7d94f37a382e01a057672a112787c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0113.jpg&hash=40bd85d7e5b3fe6b46968e7ddf472cc7ebbe09e5)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0114.jpg&hash=ab7c639162df39ccf0ec97c789552c949cdb6fc3)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0106.jpg&hash=a43d7fc7a9d9dbea4c57375b7dc881474b1b5b2b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0107.jpg&hash=288c8666418517254ddfa3e3213cbf7fcb6082f1)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0109.jpg&hash=a4b1f409ea33674aa4d4f41747799a2a4c53b474)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0110.jpg&hash=64b69423c16a31739f52ab8c120d0bbf7110ae55)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0111.jpg&hash=e81fab5aae2058c890c4e05d31882f18d3f5fab1)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0112.jpg&hash=3b5d67c76c754d9321fcc4f720e4eef0a6e4ab71)
Crank going in.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0115.jpg&hash=ea1a67cbc88c54e6e8805c054984b134dbd2851b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0116.jpg&hash=32fba14edb17a95010dce0e11d2f21836423151e)
Now it was time to plasti gauge.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0117.jpg&hash=5818c9c15f225102f45d226c936062a76be8cda9)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0118.jpg&hash=b013208d318e5ffcc22eea9238cfc99e052c500d)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0120.jpg&hash=333f1728d35f7304559ea517de3ff48ff176bb44)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0120.jpg&hash=333f1728d35f7304559ea517de3ff48ff176bb44)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0121.jpg&hash=ee7b51a0f54464a4371ea5a1be22b6f0d8d0aee7)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0122.jpg&hash=05cdfecbaa041dcdc88ffcdb5e9d65d3aa088378)
Next up was to TQ the main girdle.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0123.jpg&hash=1a8c0613598b0272fc96a1a3a95d425d8bcb2865)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0124.jpg&hash=a74b7f287274cc1ef3048e18d3c0e8fb7d24eab2)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0127.jpg&hash=ceaf5df8dd0e72f550d5a8d4455abd204412933e)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0128.jpg&hash=6c0248ee123563012bda2323122058a6306ad443)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0129.jpg&hash=a32e241c6152381b783b9663d45519720e9809ed)
All them look like this when they where done.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0130.jpg&hash=9393b79dd786845e9ba5235c21f02e721a7415b3)
Once again Arab money showed up out of no where but would not take another pic.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0125.jpg&hash=a81fbdab413cfe56854392f43aaa773859ed803f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0131.jpg&hash=a79e4c127530bcf81889e5c5fe496bed4cef4e8e)
While we work another of my friends showed up, Jenny. She fail because she would not let me take any good pic's of her.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0146.jpg&hash=0f19791260e595eed4e4cc9c756b1297031ed23a)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0147.jpg&hash=340d69af18e84cd2f4f10c867d20ae741b35ae6d)
Since all the bearings check out it was time to lube them up and re TQ them down.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0132.jpg&hash=2c0bc2dd15eb61860f4adb6e5a8ef9f85b95bd6c)
This is me lubing up the mains.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0134.jpg&hash=d1a3efdc3bf4067d0ef7145ae22f4d3f30c5fb8c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0135.jpg&hash=d8d388df5d732b4aabc9bf9664d8af9f564979d4)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0136.jpg&hash=3f115798a1d4e61be366decd8255ffa9e5edcc9d)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0137.jpg&hash=9f78d1f187e8bf2456579cab519ce673de2ea9fe)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0138.jpg&hash=73ff3f4ad297894aa463938d92dfd1161864521a)
Here was the block with the crank in it.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0139.jpg&hash=a6ca9f4be41c379a5bab5d038eee85123b2d0b1b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0140.jpg&hash=7f6a01f8b3432a084b77ae34966d3b9766461c04)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0141.jpg&hash=0db80310d569b5f5154e4ce7db785bdc4a70c5ff)
Here is another pic of everything we used to work on the motor.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0126.jpg&hash=a16f716a50a3a5805a87fdec208e0f19f48b937e)
At this point in time everything was going rather smooth, then once again another set back. As we where installing the rods and pistons some how one of the bearings fuck up on rod number 1, by now it had gotten late and we call it a night. I been super busy since then so the motor is still apart. I did get a new set of rod bearings soon I just need some free time.
I also have a bunch more parts showing up soon.
This is me looking at one of the pistons before we started grinding the under part of it.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fdscn0144.jpg&hash=71a0313ed6d9e03cdf286317143dbe856bbf2e7f)
-
Damn no one likes pic's ???
-
I've never built an engine before but I think I can now.
-
I've never built an engine before but I think I can now.
That makes uploading all these pic's worth it.
-
Looks good lmk if u need any help.
-
Looks good lmk if u need any help.
Thanks again Joe. You, Dr.D and JD where a ton of help!
-
Should have checked the "crush" in the bearings before plastigauging them. But it would be more difficult seeing as you have a girdle instead of individual main bearing caps. Without checking, you dunno if the bearings have sufficient crush to keep it from spinning a bearings.
-
Should have checked the "crush" in the bearings before plastigauging them. But it would be more difficult seeing as you have a girdle instead of individual main bearing caps. Without checking, you dunno if the bearings have sufficient crush to keep it from spinning a bearings.
Its a pain in the ass getting around the girdle so that would be rather hard....
-
Only way I can think to check it is to use a snap gauge to measure the bores of the bearings at different angles to check for out-of-roundness, and mike the snap-gauge to get your measurements. Would be a pain in the ass, no doubt. But worth checking IMO. Seems most people don't check it, and spinning bearings seems to be more common on hondas than some other vehicles.
-
Only way I can think to check it is to use a snap gauge to measure the bores of the bearings at different angles to check for out-of-roundness, and mike the snap-gauge to get your measurements. Would be a pain in the ass, no doubt. But worth checking IMO. Seems most people don't check it, and spinning bearings seems to be more common on hondas than some other vehicles.
I wouldn't say that. Might have to be the people slapping together motors :P.
-
Kickass update, thanks for all the pics :yes:
-
Kickass update, thanks for all the pics :yes:
I should have another update soon. Just got my ASR rear brace and 24mm sway bar :noel:
-
looking good man
-
hell yea dig the little how to!!
looks good
-
Are you doing that in you're living room? haha, and damn turn up the heat that poor guy had his jacket on the whole time! Were those vitara's? what did you end up doing for ring gap? Kinda shady engine build but it will probably run, lol.
-
Are you doing that in you're living room? haha, and damn turn up the heat that poor guy had his jacket on the whole time! Were those vitara's? what did you end up doing for ring gap? Kinda shady engine build but it will probably run, lol.
It was over my friends house, and yes it was fucking cold! We set the ring gap to .018 for top ring and .020 for the lower, yes they are vitaras. The reason for the loser ring gap is the plans for the motor. Once everything is together and running good, the car will be brought to JD. Want to see what it will make at 30-35psi and maybe a 100shot :noel: Whats shady about the engine build? All specs have been check to make sure they where fine, everything was super clean.
-
Kick ass update, always good to see pics. Update again when you got time.
-
Looking good Steve.
What I do to make bottom end assembly easier is find an old girdle and cut out everything but the outter caps on each end and install it. Put my rods in, torque. Remove the 2 caps and install the real girdle.
-
Looking good Steve.
What I do to make bottom end assembly easier is find an old girdle and cut out everything but the outter caps on each end and install it. Put my rods in, torque. Remove the 2 caps and install the real girdle.
Looks like somebody has been paying attention to The Old One: http://www.theoldone.com/articles/d_series_engine_building_tips/ (http://www.theoldone.com/articles/d_series_engine_building_tips/) ;D
-
Looking good Steve.
What I do to make bottom end assembly easier is find an old girdle and cut out everything but the outter caps on each end and install it. Put my rods in, torque. Remove the 2 caps and install the real girdle.
You know I thought about that, even had a old junk one to hack up..... Oh to late now lol.
Only update is the motor is still not together, between working 30 hours a week and going to school full time its hard to find time. I also want to take the time and clay the motor as per JD instructions to see how far the cam can be push before hitting the valves.
-
Well went to through in the last bearing last night. Put it in and once again a fuck bearing. Took a better look at the crank and there is a small nick, in the journal thats fuck up 2 bearings. Looks like I need to pull the crank and get another one. Good thing is I have a back up crank. Don't know if this happen at the machine shop or some where in between there and the place im building the motor.......
-
Looks like the motor will be taken apart this weekend and redone using a spare crank I have.
-
Ok its been about 2 weeks since I had time to work on the motor. Hoping to have it doen this weekend.
Anyways hope to be doing some work to the crx to get her prep. Can't wait until it starts getting warmer.
Anyways updates are worthless with out pic's. So a pic of one of my good friends.
Here is my friend that loves to work on her car. Car in the back is her 93 ex coupe that she just loves. Can you say she knows how to heal toe better then most my guy friends :noel:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fyes.jpg&hash=f7d51b18fe441e442d3b709894763dd9bd0c8b22)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fz.jpg&hash=5f10f32aadb68c2a73eb838a937a66f4779d638a)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fcute.jpg&hash=97cc592a21da46ea166e62563196a8b402cf180f)
She knows how to get down and dirty, then look super hot after :yes:
-
DO WORK.
(on the car or the chick)
-
DO WORK.
(on the car or the chick)
Hum I think J likes :noel:
-
hey i know her :yes:
-
hey i know her :yes:
Yup she was with me when I pick up the d15 swap from you :noel:
-
Well went to through in the last bearing last night. Put it in and once again a fuck bearing. Took a better look at the crank and there is a small nick, in the journal thats fuck up 2 bearings. Looks like I need to pull the crank and get another one. Good thing is I have a back up crank. Don't know if this happen at the machine shop or some where in between there and the place im building the motor.......
a fuck bearing as in spun a bearing?
-
Well went to through in the last bearing last night. Put it in and once again a fuck bearing. Took a better look at the crank and there is a small nick, in the journal thats fuck up 2 bearings. Looks like I need to pull the crank and get another one. Good thing is I have a back up crank. Don't know if this happen at the machine shop or some where in between there and the place im building the motor.......
a fuck bearing as in spun a bearing?
There was a nick in the crank that could almost not be seen, shit ate the bearing.
-
DO WORK NIG!
-
DO WORK NIG!
I know, just haven't had the time. Also been saving up to buy some more goodies :noel:
-
next time you go to lap the valves. DO NOT PUT THE DRILL DIRECTLY ON THE VALVES, use a piece of vacuum line on the valve that is 5-6 inches long and then put the other end in the drill. You probably trashed your guides doing it that way.
-
next time you go to lap the valves. DO NOT PUT THE DRILL DIRECTLY ON THE VALVES, use a piece of vacuum line on the valve that is 5-6 inches long and then put the other end in the drill. You probably trashed your guides doing it that way.
Bah its a sohc head. I have like 10 laying around some where. If it where a B or H head I would have done that.
-
Ok its been about 2 weeks since I had time to work on the motor. Hoping to have it doen this weekend.
Anyways hope to be doing some work to the crx to get her prep. Can't wait until it starts getting warmer.
Anyways updates are worthless with out pic's. So a pic of one of my good friends.
Here is my friend that loves to work on her car. Car in the back is her 93 ex coupe that she just loves. Can you say she knows how to heal toe better then most my guy friends :noel:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fyes.jpg&hash=f7d51b18fe441e442d3b709894763dd9bd0c8b22)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fz.jpg&hash=5f10f32aadb68c2a73eb838a937a66f4779d638a)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2Fcute.jpg&hash=97cc592a21da46ea166e62563196a8b402cf180f)
She knows how to get down and dirty, then look super hot after :yes:
man, you better lock that down
-
She just my friend, and a great one at that.
-
someones got the yella fever
-
someones got the yella fever
:noel:
-
Ok time to update a bit. Still havent got much done, still waiting on parts. Oh well onto the pic's.
My beat to hell work place :P
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_8632_.jpg&hash=c896938a3215eaadeadfaec2db4c83b33eda58cc)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_8634_.jpg&hash=7e74eb16cd9568772d9c8c8ae99275b39efa7992)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_8636_.jpg&hash=c48784cf4769b5fbbc96b2d59c5191a4192dbdda)
Look at my nice door
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_8637_.jpg&hash=597bd91c4300afffeced132e47ad3bbf13e75020)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_8635_.jpg&hash=cd50727339d707746f2c8a800ca785027a867ec3)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_8635_.jpg&hash=cd50727339d707746f2c8a800ca785027a867ec3)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_8638_.jpg&hash=79f051c97da4209e77bae7e9e0a808a611175ed6)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_8639_.jpg&hash=a0465476b0b86fcc844157a5090e9bcbd0c044ce)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_8640_.jpg&hash=0e218108e9f455dc784a6465f5d1e0b73e448252)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_8641_.jpg&hash=67c099b308d470f64a8f8b6426d282f890c5ff1a)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_8643_.jpg&hash=b2f58ccfe5d5ec48ae20863a0c2c4611b04c5804)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_8645_.jpg&hash=964d0a123e93febf07d1216cb8c50f9dcfc86414)
Seam sealer grinded off and red pain add to bare metal for the time being.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_8647_.jpg&hash=9f3983e0e4842be3892ea52b23076baa8c4119d6)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_8649_.jpg&hash=5e80e1ab8cef7416da6bcc49764b419fd7e5d7cc)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_8650_.jpg&hash=210d368ce7e7f1bf748512d971e844a084d6d8ae)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_8651_.jpg&hash=fc31af7aee0b16845230a5f6cdcc53c9dad9be48)
More to come!
-
Well it took a lot longer then plan, but the short block is done.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_10833_.jpg&hash=78e9e07b8ba7025c4ad953c986b5f0159c2a31a0)
RHMT For Life Nog!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_10869_.jpg&hash=e31cab2d842c3a818879a383ef32e6781002cf47)
-
bout time looking good are those my slicks :yes: i'll have the rex done soon to :noel:
-
bout time looking good are those my slicks :yes: i'll have the rex done soon to :noel:
Yea those slicks are beefy :noel:
-
Sharpie on pistons bumps compression up like 30 points.. RHMT should know by now Sharpie + pistons = shit breaks.
-
Sharpie on pistons bumps compression up like 30 points.. RHMT should know by now Sharpie + pistons = shit breaks.
Blowing shit up is all part of the game :noel:
-
yup it is
-
u find them ls cams for me yet
-
u find them ls cams for me yet
Oh shit hahaha, sorry bro completely forgot about them, just started a second job. Ill make sure to look for them tomorrow.
-
Bout time, got too caught up with that yella fever didntcha? i'll get you like the plague! stay away from the sweet delicious yella nectar!
-
Bout time, got too caught up with that yella fever didntcha? i'll get you like the plague! stay away from the sweet delicious yella nectar!
no :?:
-
Dont lie you slant pussy yella nectar eatin railroad builder's lovin that chank YOU round eye'd pale skin'd bastard.
DONT TOUCH MY WIMMENZ!! BING BING BONG!! MEOW CHANG CHONG BING BING BING BONG!!
-
Dont lie you slant pussy yella nectar eatin railroad builder's lovin that chank YOU round eye'd pale skin'd bastard.
DONT TOUCH MY WIMMENZ!! BING BING BONG!! MEOW CHANG CHONG BING BING BING BONG!!
:o WTF
Hahaha dude im Colombian, i aint pale nor dark.
-
oh ok, sorry. ill keep that in mind next time i try to racially insult you ;D
-
oh ok, sorry. ill keep that in mind next time i try to racially insult you ;D
Well that be before or after you buy a kilo of coke :noel:
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_11630_.jpg&hash=2ce81408dc2f0082a136cac01460952a889e3368)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_11631_.jpg&hash=607ee9fa497f865d7f0183095c4742fa2b50bb45)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_11632_.jpg&hash=92322f232f8c14412d33c0563e38e82db80b4ae7)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_11633_.jpg&hash=d317c4391b51713406bb80bb1aab0abdc847a323)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_11634_.jpg&hash=0c455b6fe083229f11dc1164042fd96268302830)
-
That last pic. I like. :yes: ;D
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_11630_.jpg&hash=2ce81408dc2f0082a136cac01460952a889e3368)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_11631_.jpg&hash=607ee9fa497f865d7f0183095c4742fa2b50bb45)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_11632_.jpg&hash=92322f232f8c14412d33c0563e38e82db80b4ae7)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_11633_.jpg&hash=d317c4391b51713406bb80bb1aab0abdc847a323)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2F139776102_11634_.jpg&hash=0c455b6fe083229f11dc1164042fd96268302830)
i like :noel:
-
That last pic. I like. :yes: ;D
:noel:
Turbo eyes and the H for honda, H H H for hair, Fuck you for the mouth (for those that dont like), and zc for the nose.
Some other stuff you cant see to well;
T-bird pump
Log
Crx
Pac man eating a K
Im not JDM so Fuck you!
Jonny race car
Dsm 450's
Joe*2
-
Small update. Crx is going to be down for longer then I thought. Pick up a auto 94 4r ex civic, in the middle of throwing my built motor into it.
-
where is my name on the valve cover?
"FLIP NOG IS TEH SHITZZ"
-
where is my name on the valve cover?
"FLIP NOG IS TEH SHITZZ"
I still have room :noel:
-
where is my name on the valve cover?
"FLIP NOG IS TEH NIGG"
-
where is my name on the valve cover?
"FLIP NOG IS TEH NIGG"
I think I like this one more hahhahahaha
-
Time for a update.
Been working on welding the engine bay a bit;
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN0943.jpg&hash=038c44dbe4e41441130154b8c8c0c69719b5600c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN0944.jpg&hash=3e954c03ca06d3f8e0d42bc749aee14edc68050b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN0945.jpg&hash=26d461a396787761aa42b841773198e7d3f92b38)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN0946.jpg&hash=e84981ca43cd9d9a07b03fbb2cbe05783a0bc489)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FDSCN0948.jpg&hash=6c98d9cbca4ed85a063c6d6bc8cf41927f38b91c)
-
Oh yea we getting work done! This weekend was a long one, spent 15+ hours working on the car and cleaning the garage/ looking for parts.
Enjoy the pic's
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FDSCN1587.jpg&hash=3319e520edb567799d05eba2a06ca4f7bba5e1b8)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FDSCN1588.jpg&hash=8613e25c01ab02572085ab2106c6c6100534f361)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FDSCN1589.jpg&hash=c40b87c19891bcd35b1b28de7c9a94653f2dbe21)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FDSCN1590.jpg&hash=0e0101d6cb11d57278cc9e939944e0c054244ea7)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FDSCN1591.jpg&hash=302ff5271d638c655c3207ab30eda828d27ab90f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FDSCN1592.jpg&hash=76cab9207b59cd5dc0e668cd0592023aecd6542d)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FDSCN1593.jpg&hash=3603d3c1d273691450fd8398e96b4ab6fe74c011)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FDSCN1593.jpg&hash=3603d3c1d273691450fd8398e96b4ab6fe74c011)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FDSCN1594.jpg&hash=d4240d215df303e6abdfa9e12b9e69c13c03c1c2)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FDSCN1595.jpg&hash=e9544aa2611787a94f8c0832a9d938936540587e)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FDSCN1596.jpg&hash=73219f8cd4fece5fd2a7366e4b3bd8b1697f2368)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FDSCN1597.jpg&hash=343d2b6359595e403ad05c2222b3bfcdb286b384)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FDSCN1598.jpg&hash=7d9aab81d8d64908fa3c1effecd4821c26c63241)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FDSCN1599.jpg&hash=7c8c51ea373ead9c95424b7f6b6b78781a94ad99)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FDSCN1600.jpg&hash=5b91a11b817d374c1aa34f5fef92cf3d486303bd)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FDSCN1601.jpg&hash=3171d6fe9b9416ebed43af1f65d9a28898a2b7a2)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FDSCN1602.jpg&hash=8da7191e9905b816804612ad0b0631ce98f8973b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FDSCN1603.jpg&hash=e014dac605e5565be59afd5b59d158472d5d6638)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FDSCN1604.jpg&hash=fa3db820b7394d306550c5032156109495bca1fc)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FDSCN1607.jpg&hash=4afbb76ce1d84b19579ad88a48cbcf6a829a5803)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FDSCN1608.jpg&hash=e7bbe2d7b2d464f903ee618f97633057f61ae28b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FDSCN1609.jpg&hash=69e8bf92c9914cb404c4dc086dc351dd87546401)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FDSCN1610.jpg&hash=7ec44447ebfe001e21a670ab8d61a9acff923224)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FDSCN1611.jpg&hash=5eb650cae7d9ca9d67a81b9a6d08b9ef36044bdc)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FDSCN1612.jpg&hash=78cfd4f19542f9ca0d2c9893a500b53df78061a0)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FDSCN1613.jpg&hash=f95b36b6982197d29cca96e6c31de2012899b410)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FDSCN1614.jpg&hash=ba5439fba1c8c68c4434cdffa8705396f94306db)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FDSCN1615.jpg&hash=ef03f70b60c8060dc68e82ce394d829ab60a1f0e)
-
DAMN!!! Got some work done for sure over the weekend!!
-
DAMN!!! Got some work done for sure over the weekend!!
Hell yea, also spent about 15+ hours cleaning the garage :P
Good thing for the 100 proof bolt my friend brought by :evil:
-
Do work!! LMK if you need anything.
-
Do work!! LMK if you need anything.
I just bought the engine bracket from Chris M. Dieing to get it together!
-
I just checked the tracking and it says that its out for delivery! You should have your new exhaust housing soon! :noel: O0
-
I just checked the tracking and it says that its out for delivery! You should have your new exhaust housing soon! :noel: O0
Got it, oh yea I cant wait to finish the block to start making the new mani!
-
sooooo this is where you been hiding out 8)
-
sooooo this is where you been hiding out 8)
sooooo this isn't a noob post
-
sooooo this is where you been hiding out 8)
sooooo this isn't a noob post
Pun go make a intro post! Heres how its done :noel:; http://www.realhomemadeturbo.com/forum/index.php/topic,16649.0.html (http://www.realhomemadeturbo.com/forum/index.php/topic,16649.0.html)
-
I think we need a few more pictures!
The start of a new manifold, Weird tech flanges, piping, and traction bar setup.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FIMG_20111221_172727.jpg&hash=e0fbac5e970671d546cf429e38297d5665801ec8)
Plan is to make a true twin scroll manifold, with the 12cm hotside I should be able to make full boost almost 1k sooner. Only one way to tell.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FIMG_20111221_172738.jpg&hash=721de64717d0dd28f638d5a26c32cf55ddcd8e41)
And my friend baller tool box, yes thats a 32" tv, yes there is a loud system in it, and yes it is all hook up to a computer!:bigok:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FIMG_20111223_175019.jpg&hash=0ab82d7cdb3aadf5745c908fcd1705e8e441d238)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FIMG_20111223_175034.jpg&hash=34b60a08dcc51493195c0fb33f96a84ca17c7632)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FIMG_20111223_175551.jpg&hash=63086acbf1e1ba455743bdcce340c46304823d8f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FIMG_20111223_175801.jpg&hash=960baebe26c6193c7c8ec141486446b39fa81252)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FIMG_20111223_175801.jpg&hash=960baebe26c6193c7c8ec141486446b39fa81252)
-
lol, and here I was pumped getting $50 off a clearance 11-drawer chest that was $150.
-
lol, and here I was pumped getting $50 off a clearance 11-drawer chest that was $150.
Shit I have a $100hf box
His box is WAY to baller for me!
-
Well it looks like a while since I last updated this post so lets get to it. I been busy getting stuff done and staying away from the computer in order to do so.
I had strip the interior of the car to clean out the glass and the layer of dirt from setting.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120415_165124.jpg&hash=00714d1ca57fd8ba6a953edbd78902a0606b6d30)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120415_165136.jpg&hash=27a460685939d54a82a51596ca5b9d42509fe8fd)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120415_165145.jpg&hash=980d7bdb6c19f1516c1f0b30135fe6445cfaa4f0)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120415_165157.jpg&hash=2d368f19e0998c234246f258d33376597576348f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120415_165206.jpg&hash=3a04de7bc4f9f35843960ae3d69c9e2888b97eae)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120415_165215.jpg&hash=27933ff54ddc8a8426b39864c2db5edcebde0207)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120415_165250.jpg&hash=5580907565164fb4ed8efc89b07665b6fbed4a80)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120415_165321.jpg&hash=690692b37fbb3b312708b9c97a59e4aac7a650c0)
Oh damn we got a problem ;DDD
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120415_194010.jpg&hash=332ab2029adf1c0c2ced0315681775ca3901da95)
Blood, sweat and lots of f bombs hahaha
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120426_170024.jpg&hash=b183399402be52d885543d4454273d33606bf909)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120426_170100.jpg&hash=8831ab43e3899fe72b3f5bdab625d5f81c55af02)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120426_170308.jpg&hash=2a33a5a30aa03511bc3a8e9fc65f4e51354bd3fe)
Well onto the good stuff, new twin scroll manifold.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120428_153153.jpg&hash=bff052546f8238207a99992ed063a666a625da6b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120428_153158.jpg&hash=50667ece21961930f34bda53bf6c628dc20a183a)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120428_153206.jpg&hash=baed1a9c48d1e4bd71fdf5fc936ebb51e38ea380)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120428_153214.jpg&hash=6cadedfc674a34f69be362ca8a710a0aa6102569)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120428_163607.jpg&hash=333850a67a342fd722879a6328287b60853acc4f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120428_172901.jpg&hash=54414decf40c45352939a0839db5525ccbdf9149)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120428_172906.jpg&hash=9c0634c366615d0106052b00f9b2d8e3cf2ecec5)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120428_172911.jpg&hash=1b0267a9eaadd5c9594af1b72923d83a67bbb877)
Then came this
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120429_131324.jpg&hash=4b626f7320bf02420ef9c177b00876481afc5219)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120429_131331.jpg&hash=445031520fc611e6a8c904dc867de7146040c452)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120429_131338.jpg&hash=7fdf82386f0c8e8b9f397ded00473575af262d88)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120429_131343.jpg&hash=963fb65fe8447363f7df8d71824307ecab22ce86)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120429_141948.jpg&hash=f378eec7719537441a9a0002952f29bc88ca303f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120429_141953.jpg&hash=f8497e5597cf78248cec6fee4bcac9c2151357f0)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120429_141957.jpg&hash=75b7bc3ded522fab3db64595f7320053472f3df1)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120429_142004.jpg&hash=6ddb893b809f233f30c4c5296d7cd3a3ff05fb90)
Love sparks!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120429_145314.jpg&hash=36ffe5be3b2f68fa30c9c33862d8e0f9a57bdbdb)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120429_145319.jpg&hash=143a7a522d5251e4827d934e9c4261f35dfc2430)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120429_145327.jpg&hash=767507314e556eb676b205f5541acd29751afd63)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120429_145350.jpg&hash=863807f2bda44bc1eb1a8f9f9fc26fa16cbb824d)
Doing work
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120429_155358.jpg&hash=f9e2f1478bf7cb4d2eb0df4f4dcd1522aa24226b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120429_155502.jpg&hash=9a7a3052b74488c95898433d4fe7a3dce7456ba3)
Oh yea
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120429_162701.jpg&hash=f6f3e37c7b6d2a07fdde03f50cb53dffdab7c44c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120429_162709.jpg&hash=e36a9a2facedda8e965e63781da95948ccf553bb)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120429_162719.jpg&hash=ebfaba275310d4514bf818bc09d8e6b94e08cc08)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120429_162728.jpg&hash=f37079e1cea65159087f7784e969981c0b44ab98)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120429_162743.jpg&hash=a076e39cade28758835c5f75eb48c87dee973fc0)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120429_164413.jpg&hash=1ac27953a1f3cced7bb0928b8329436291f02c90)
Front in on.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120429_201734.jpg&hash=d02f4de2e55c3ea6c86ee6647afe98df4b52c09b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120429_201751.jpg&hash=8829b47f524bda3a06e84f56895ed0cd74343cbe)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120429_201800.jpg&hash=86024281424aa78862d8a1fb9ec547c527a33b8c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120429_214326.jpg&hash=90ccc8065af189abee378805b393094dd5bb4af5)
Thats it for the weekend.
-
This rex has been through some engines/setups
-
This rex has been through some engines/setups
A bunch just keeps getting better and better!
-
I been slacking on updating this build thread but no slacking on working on the car. Walbro 400 is in, its funny because the stock crx pump is bigger :noel:. Also converted the whole car to -6an. Enough talk, pic time!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120504_195638.jpg&hash=418da201ad1e41613df5e9da53bb7d8abec1c293)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120504_195650.jpg&hash=ebd8cec59fcda710892aaa880aeabb2fd467e6d8)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120504_200518.jpg&hash=ca135419f98486359d8050eaa71491a443475976)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120505_160452.jpg&hash=2f571905608e075180bf911cc7a14f07a659c97f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120505_160500.jpg&hash=89bb2d250487a3cb14a6ccca0f3081ac59cd98fd)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120505_160505.jpg&hash=d10781d6b4869ae700a99339116f47c9590976bc)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120505_205611.jpg&hash=c16a5ccf60a3d92f62976652a8d2b39bd6ccb678)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120505_205622.jpg&hash=2e0bf8da7bfd8e07f3b362423b75a8184dadae99)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120505_205622.jpg&hash=2e0bf8da7bfd8e07f3b362423b75a8184dadae99)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120505_205636.jpg&hash=bc0f59935c7b91398dd8b1cc9c31dd7da7cafabb)
This is how much I had left from the 12' i bought.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120505_205902.jpg&hash=506a46cced8786eba7e962ff85a16a93f3b76a00)
With the fuel setup the traction bar was up. Open the wholes up from 1/2" to 5/8"
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120512_113342.jpg&hash=bc572a6c06ec0ee6367261fc9d7ae926c503457c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120512_113426.jpg&hash=f107296f26f1de11542da0a2d5a67bc023405c8b)
5/8 Inch Chromoly Swedged Tubes and hiem joints
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120512_113438.jpg&hash=27e5e6ac1dfed5b4d4e33ba6c541c01901e4ec18)
Long bar and brackets
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120512_113506.jpg&hash=8313c3a7cf485b0abbfb302fc8ef674a8a6078a0)
Mock up
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120512_124320.jpg&hash=df4a113e660766deaa0cd439ea3f86067b350739)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120512_124327.jpg&hash=4aa031607efd643c710637038bdf7e926790b6e1)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120512_124337.jpg&hash=a6acfe714cd8a4b1c9bfa27cb8d96650ae8bcf61)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120512_124353.jpg&hash=bf39f19f9712f55d4e034c382121c365f8fcba7b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120512_133947.jpg&hash=d52cfc45ae6ab90af6b71a9b31143241a42d1dad)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120512_133953.jpg&hash=915365c2369b4ee86c3645ee08c3f603dc24a28c)
Fully welded
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120512_140929.jpg&hash=886f13012de27c5092289b06bedd87f385da7e99)
Little black paint
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120513_164036.jpg&hash=4537cd13a1ba6ffbf1ac657802f6c43644a99003)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120513_164045.jpg&hash=f0e9ad7a7ead863f1fc12aa7b04d5f427259ab7c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120513_164106.jpg&hash=b7006e1442d7ea6b847b32cb5a69d8e8fa714e52)
Forgot to added I rewired the pump to boost power to it with a relay. Hoping to get more done this weekend.
-
Just a heads up. You cant use just the tow hook bolt holes for the traction bar. It will tear them right the fuck out. You will also need to weld on a bracket or something on each and to use at least 1 of the bolt holes that the factory crossmember uses.
-
Just a heads up. You cant use just the tow hook bolt holes for the traction bar. It will tear them right the fuck out. You will also need to weld on a bracket or something on each and to use at least 1 of the bolt holes that the factory crossmember uses.
that's all I have to do, but later on. I remember seeing you do that.
-
Time for some updates!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FIMG_6178.jpg&hash=2f842e43226229d7ef4daabb97cbbb4511dc86c2)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FIMG_9161.jpg&hash=6c2da01701b0f75925930f66a98135f0c5b2674d)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FIMG_4519.jpg&hash=13ce9fcabb041d027b735e7abf642cf33a61cc60)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120518_191943.jpg&hash=ae5c5fad4e4f20329ca3552689ea77f317a545c9)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FIMG_4193.jpg&hash=d83a3f566458c6c15f37a0f7e4f1ccfc473f6c01)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120518_191938.jpg&hash=cd5568237073dd05a04f19bd41caadde1eda91aa)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120518_191931.jpg&hash=a8b1eea85365d2ed4057db6b467cb72651ec2b6f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120518_191924.jpg&hash=06bd1510124a56269009e36dccc8484f63ecb5e8)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FIMG_8277.jpg&hash=facb656efd2824e6265d6535bbe60708abfb7319)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FIMG_1828.jpg&hash=ced25be518ae072118af41bb6232af55127c927f)
-
Nice will this be the first D in the 500bhp RHMT range? :noel:
-
Nice will this be the first D in the 500bhp RHMT range? :noel:
I think it will make 500hp off boost at around 35psi, then the 120shot :evil:
-
do work!!!!!!!!!!!!!!!!!!
-
do work!!!!!!!!!!!!!!!!!!
Trying, going to see if I can get everything done this weekend with the exclusion of the new manifold.
-
Cant wait. My hatch wont be done, so the accord will be there. What numbers did Catsman BMW make again? Cause i have to beat that.
-
Putting in work, UPDATE TIME!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120525_202430.jpg&hash=c12b9b909720e2d750c17d507d5802df90f1bdbe)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120525_202441.jpg&hash=8a8f7853b7887ab600660fe0d79c20c1d4ee5f2f)
New filter and line
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120528_113021.jpg&hash=7251c7319ed940ad273d154c357c5b69159ea46d)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120528_122637.jpg&hash=a2336a11e3678bf0aabf025137cf68d33499b398)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120528_122651.jpg&hash=14b46f9ccfe2744b5a66125f1a73c09a96fb7909)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120528_122643.jpg&hash=4ed91df43a22a13d731627015fd39e584e0f8e87)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120528_122637.jpg&hash=a2336a11e3678bf0aabf025137cf68d33499b398)
Oem rail coverted to -6 in and out
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120526_142058.jpg&hash=765afc761e3130a91875f9f2fd315d162aefca7c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120526_111723.jpg&hash=d749c5bfe3c85465bfbb3b0366c61c3f5358b57b)
Cant leave it like this
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120528_183146.jpg&hash=23c1dc95af26fda00932b469084decd0808c3576)
Rhmt Fowee FTW
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120528_183154.jpg&hash=605f466e98d6693484836918ec409455243ad8eb)
Charge piping done
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120528_201755.jpg&hash=1123a4b6672febed6a45dfa952ccbd2861ceca8a)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120528_201802.jpg&hash=517bf4eebdd18fbfcc8b81b079db053c6f085028)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120528_201812.jpg&hash=0a1eea228eb572fe8a1d365da873fa9cd6f1ba22)
Almost there!
-
o yeaaaaaa :noel:
-
o yeaaaaaa :noel:
Putting in some work today hope all it goes well.
-
Time for some more work! Put in about 1 hour making this;
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120530_184310.jpg&hash=322c51d8ce7305355ae6f586cbb8fe334061040a)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120530_190020.jpg&hash=14a08465e6476db35709445e5c8b8bdf75b64f7c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120530_190034.jpg&hash=99a206d5a3df64348e89dc545006b62f8a75a3b3)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120530_190042.jpg&hash=dec41397519e5d7abcf1756ce34e4e9733048e34)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120530_191941.jpg&hash=af9e9b07ccbc1fa0fed0373b90f029d4cda707c3)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120530_194659.jpg&hash=d8b68f521eb844698a2f15142cc502b0a09eedf4)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120530_194705.jpg&hash=19aefc1064ef2866c6802b50cdb9f2afe8b7d90c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120530_194713.jpg&hash=049234cb660bf6d96383009e9d3fe3e1587e4bbc)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120530_194721.jpg&hash=b0a400c5115530e1a1eb0220e677921f5788423c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120530_194830.jpg&hash=1c2468be52d49c552f3255902bfd16cc0a395cff)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120530_194836.jpg&hash=561cb353060e042d17b4dd069fec5374f2520dbd)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120530_194847.jpg&hash=568e6c3b39cac3dbda8891ac9722e7c2dba91572)
Thats it for now.
-
need more!!!!!
-
need more!!!!!
Its getting there!
-
need more!!!!!
Its getting there!
i know. Cant wait to see it in person.
-
need more!!!!!
Its getting there!
i know. Cant wait to see it in person.
I need to see if my friend will have time to weld the manifold soon, im running out of time....
-
What size fittings u use for the fuel rail?
-
What size fittings u use for the fuel rail?
http://www.summitracing.com/parts/EAR-991945ERL (http://www.summitracing.com/parts/EAR-991945ERL)
This was the fitting I used, it had the right thread pitch, on the other side of the rail I had to cut, drill, and tap for it.
-
Looks like my maifold should be done by this weekend lets see if I can fire her up!
-
do work
-
do work
Get shit done but still behind ftl
-
Oh yea work getting done!
Friend was able to weld up the maifold almost almost night including some other misc parts.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120612_211831.jpg&hash=6056db96873bb41f5abe7acf4df6a0d0912d27b7)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120612_211821.jpg&hash=02638ce0fd65a236eb2525cc3f1f6410b2b8abbc)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120612_211813.jpg&hash=d38e25d748a8da413476343eb0ca67065a499c5a)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120612_211235.jpg&hash=76fca1259cbb862cfcae041451d93df7f54bc6b6)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120612_211839.jpg&hash=9fb87d2bcdb6ee1446e5ec846655c83e09fef382)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120612_211135.jpg&hash=c5f45c04e6ebf184284f1b0910e01c26b50ef859)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120612_211839-1.jpg&hash=070b9583b3f2d2d3bfbad7f73a19c5e064cb92d9)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120612_211218.jpg&hash=1e99e948bac5d76a6dd3049f07d1dfdfeed0f8bd)
Stock fuel rail converted to -6 in and out also weld the stock fpr whole shut.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120612_211203.jpg&hash=0d9fbb890659437275f595b800b573eb95c0096f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120612_211156.jpg&hash=ebe2601daa6fffbe55ffbe1a9eefc6b36a95b059)
Housing Moded to fit setup
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120612_211203.jpg&hash=0d9fbb890659437275f595b800b573eb95c0096f)
More fuel rail action.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120614_085306.jpg&hash=0501f8d72214750a439fdb7914a8386ffa97219d)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120614_085311.jpg&hash=938b8ce9253d5f2871f9f626282294ccf09a4229)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120614_090440.jpg&hash=51fe7063d55053cada51ab13a3fe4ca58de5d27f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120614_090511.jpg&hash=75c1ff1490491298588816415e53cccd5dd2395a)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120614_090526.jpg&hash=260ba5e3bcff9b9db9502bdc8103f76ca6d71464)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120614_093839.jpg&hash=a6f67f7b00ef5a132ef220408f60ad7ebcd1c4d9)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120614_190214.jpg&hash=aa0eb512cdb05dabaa71f93cda8ee8ed749764fd)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120614_190224.jpg&hash=6cf63da65e1a314d96f5781be2111bdd4ae855e6)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120614_190229.jpg&hash=c8def7733abcf9dcaa960d90710d7a99359daf17)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120614_190239.jpg&hash=e6efff31efce8b51043c516772ced5bf0776f99d)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120614_190245.jpg&hash=45abe8ba418d804f271a2916edfcf9522c7c2e75)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120614_190307.jpg&hash=1b5fd2fd6118774c152ec35654aa4488abbf012c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120614_190724.jpg&hash=8abb2d3f5edf4ef6c03e38f958c20d027b1bf0ba)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120614_191256.jpg&hash=6a9bc6ab28041fc54cd348a9e065b14332b1702e)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120614_191305.jpg&hash=31bb6932b16b52ac4965197d97ebafbc8fff4113)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120614_191333.jpg&hash=75205508ef7c419dc8aa1995a7f968735bec2d16)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120614_191323.jpg&hash=2f3b5d75399eb5112ee83edab3e97bac02ad3a64)
Almost there!
-
fuck that snap ring >:(
-
fuck that snap ring >:(
Shit tell me about it.....
-
Wow thats a lot of work. How much horsepowerz are you aiming for?
-
Wow thats a lot of work. How much horsepowerz are you aiming for?
Want to make 500 hp off boost and leave the 120 shot to see what she does at the track.
-
Almost there
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120615_193931.jpg&hash=eb78278e7619d337cc754c12c94a0b117c096f52)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120615_202806.jpg&hash=2319551588c79d62a0ecdedd3819b34714f396a8)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120615_202816.jpg&hash=20bb8ff912edf05e4d7ef20d25165f08925d1e3d)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120615_202828.jpg&hash=be79d2575aa64ab4b6c1957f6c9f973b824cc4b2)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120617_155426.jpg&hash=6d4ca71966992aabc6756cf16c7579bc4687820c)
-
Luving this build :noel:
-
Luving this build :noel:
Thanks Russ, now if only I can get it running.
-
fuck that snap ring >:(
Just installed mine today. Fuck I hate that thing. Took my like 30-40min to install it. Had to remove the cover of the BOV, push it in, fuck with it for 15min to put it in the fucking groove. I wanted a Greedy style BOV but there was no kit on ebay...
FML
-
Your setup makes my nipples hard. no homo
-
fuck that snap ring >:(
Just installed mine today. Fuck I hate that thing. Took my like 30-40min to install it. Had to remove the cover of the BOV, push it in, fuck with it for 15min to put it in the fucking groove. I wanted a Greedy style BOV but there was no kit on ebay...
FML
boosted 00 black si is a beast, had it done with in 5min!
Your setup makes my nipples hard. no homo
Hahaha I heard worse local.
Almost got it started last night, looks like time is up. JD told me to bring it anyways and he would get it running.
NC here I come, beer, bbq ribs, race gas, and moonshine!
-
Well it was a long weekend. Big thanks to everyone that help! Well onto the pic's.
Some where in Va, being out of NJ this was strange to me.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120622_092547.jpg&hash=5c0ed7867d1c18ea5888251729d172dc932f9cff)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120622_092558.jpg&hash=983da2375dcc05be738ff48564598baa25149ce0)
Crx hanging on back there entering NC
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120622_103025.jpg&hash=1bbcbfbf839e900e0f6eae35936029144a10348f)
NC looks so good!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120622_103019.jpg&hash=f350eccfd79e402c833354101d355f7c5dc1298b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120622_103014.jpg&hash=0bbb3259a87b9884f633d688def888ea7408311f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120622_103032.jpg&hash=f707acb7ee195eebc6d0280db5e2a984e3f5fd3b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120622_103037.jpg&hash=21e099db719e6478aad30561e3665d18b862642a)
Some goat action
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120622_183310.jpg&hash=9bf4a73419a169a2618e3f4c7f56d2036fb3bca4)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120622_183343.jpg&hash=d0909aed7df53463a83124f12413659791f1fddc)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120622_183422.jpg&hash=b62f8777720f3ba20615be339f73ff681700b3f4)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120622_183343.jpg&hash=d0909aed7df53463a83124f12413659791f1fddc)
Some random cars
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120622_183233.jpg&hash=0b41bf6eecc3bef2e3e9c1a56227a4cddaac6e1f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120622_183242.jpg&hash=adefb9489da860a4de90acb49119ab278f15a162)
Some drinks
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150207.jpg&hash=70c33190f6c36845db1fac3916215bab656f01ca)
RIBS!!!!!!!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150214.jpg&hash=de2b4040913c2c763d1c1b65036800f0c01855cc)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150000.jpg&hash=27f1f5e0cd3700e8ed64aaa09c054a1e5b113108)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150156.jpg&hash=7e20c64d9f0f888acb5e17c035879f91be544281)
Baller girl!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150239.jpg&hash=1cb1967b68351c03ab02948634202341285db656)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150248.jpg&hash=8f86a9bcd4a160531361a2f6c2fcf9298a396ab3)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150312.jpg&hash=b8d566531f1def61f1438b573638eda4e1e537da)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150342.jpg&hash=d1fa5a60bd4496350f5666eef146ff82eeba335a)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150255.jpg&hash=7a726def43ab5112ae0db646f1f8625bc9f30486)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150259.jpg&hash=ec37b767662acb50532b890040da4af124f5e5c3)
Pinks crx!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150533.jpg&hash=a0cc781dc832d43d7d530d176f6509bdf7f9f1e0)
More cars
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150228.jpg&hash=fa1a768e75b10c4092421964b893b4909d42d6e3)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150232.jpg&hash=8cc6633ce0d33349ab79e7c78d65b2d150ace7f2)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150523.jpg&hash=a22552ad4fe68debd10b384ef45d81072b108ded)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150353.jpg&hash=74cf84d4e77adc40a98c22e8525b2a000060e3f1)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150537.jpg&hash=01c094f66151ac65faed98e06ff56e427ca23cbb)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150548.jpg&hash=40f9e2462d1d7214c913396096e94290f1f1684e)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150541.jpg&hash=c2067bc366cbcfbb3f8014f38d1f32513989d266)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150602.jpg&hash=13736d065a887e8500a5bfa1b69e3a4214cb7cc7)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150554.jpg&hash=f51164ff2deccc89e02a9641fc6d67a8311fb4c9)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150612.jpg&hash=a422c5826088bb3e43cbc260a80b9a340ece891c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150606.jpg&hash=4ecff1913406a5a226a4d1d15477a330e338c389)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150625.jpg&hash=9094a3ab26dca5d1006f923055d2ef77709c94e3)
JD sohc type R motor
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150617.jpg&hash=87aebf69a345b749f30a92854d04b67cfa01d551)
Simply badass!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150645.jpg&hash=70d70de214bc3b42018590d4d57c7faf0fad50be)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150637.jpg&hash=c4584f7fbf5b9056851aeac9885b1496614e8ef2)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150700.jpg&hash=8c5e1e281e002a0911d47d49e9f07de6f4a6e698)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150653.jpg&hash=779bc298259760e068e083fe738f78437f79e415)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150710.jpg&hash=01553eca98293a2cf7eac456999880977b911264)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150719.jpg&hash=80f7d4430f0089bd6277399d884bcbb2dc601445)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150727.jpg&hash=bca3bca584d2a186a864a6323cb218f0bf1d19f5)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150733.jpg&hash=afa460b33172bb1f4da1c0bac6dbca132ee7ade3)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150818.jpg&hash=33efba4f575035261ed6de205423ae2075be4a31)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150829.jpg&hash=6031bf884617af57970d91f66e3472811ed795f4)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150838.jpg&hash=fc278ff98a073327f654b5c2be657c6c931f36cb)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150909.jpg&hash=9964eb51b2c591d17bb4153b5b7ed371fa1eea16)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_150917.jpg&hash=1b6547b8c925ea80254c0ee7ea3a15ff625eb607)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_170157.jpg&hash=79dfd1d29ccebe86b8bbff9b9d71da36a5f8d232)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_170205.jpg&hash=7a708bbe9ae8811e6860791d1469e37ea717347f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120623_170217.jpg&hash=a4dc3a86188248ef64f5c49b8abc592bd5ec3daf)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120624_123833.jpg&hash=d64120685034e0cef48c17cd6dadb245c5340f19)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FNE%2520dyno%2520day%2F20120624_124714.jpg&hash=4c8558408e55b6a43fd393af956e058675e6f2d6)
Thats it for now!
-
What's up with the fenders on the R33? Is it a delivery vehicle for Panda Express?
-
Project Phoenix (http://www.youtube.com/watch?v=xgJ2PG1btK0#ws)
-
o yeaaaa
-
fuck that snap ring >:(
Just installed mine today. Fuck I hate that thing. Took my like 30-40min to install it. Had to remove the cover of the BOV, push it in, fuck with it for 15min to put it in the fucking groove. I wanted a Greedy style BOV but there was no kit on ebay...
FML
boosted 00 black si is a beast, had it done with in 5min!
Your setup makes my nipples hard. no homo
Hahaha I heard worse local.
Almost got it started last night, looks like time is up. JD told me to bring it anyways and he would get it running.
NC here I come, beer, bbq ribs, race gas, and moonshine!
fuck hks and there snap ring there always a pain in the ass >:(
-
Shit pop out so I used a few hose clamps lol
-
So did you just use the stock feed as the return?
-
So did you just use the stock feed as the return?
Part of the stock feed is still used as the feed.
-
holy shit.. what did you use for tuning?
-
holy shit.. what did you use for tuning?
Ectune, but it was acting up. It did not want to spray the 120shot!
-
Its been a while, figure I would updates this.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FFUCK_YOU.png&hash=b2ed67b70509ca1e091fd2dc6a5b6c08306200ee)
Well after some time JD sent me the graph, I was going to post the correct dyno grapgh that showed the 500hp, but what's the fun in that.
I need to post up last years dyno graph, nothing changed but the car and the turbo manifold.
Edit: last years
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F296477_194208597318376_109429169129653_470401_555736043_n.jpg&hash=f0554894904527626d70303be3674afb80230495)
Last year
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FRhmt%2520Ne%2520dyno%2520day%25202011%2F319214_194208623985040_109429169129653_470402_916499166_n.jpg&hash=b90d86cca589fac05f1abeec12ce334e221ea95d)
This year
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20120614_191333.jpg&hash=75205508ef7c419dc8aa1995a7f968735bec2d16)
Last but not least full_tilt from DSO did a nice over lay that shows the difference.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi54.photobucket.com%2Falbums%2Fg115%2F31337_tom%2FD16_Holset_twinscroll_comparison.png&hash=ba6c4819b53a088e5dcc321fd0d91375f5fef75c)
-
Well time to update!
One thing that was clear to me back in June when I was on the dyno was I had to replace the gas tank as it was leaking from one corner. I really didnt want to drop the tank again on my back. A close friend of mine told me to being it down to where he work, HONDA! Need less to say I couldnt pass up on the offer.
You got lo love having all the right tools to do this! Power lift for picking things up and dropping them off.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121027_170915.jpg&hash=16245e781baab238f599f522bc64ba44ab48c163)
The man at work making it look easy!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121027_170908.jpg&hash=aa3387c95c5b2100c2b45bd1741e79864b07fdce)
I swear I closed my eyes for a sec and it was already out!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121027_171801.jpg&hash=d8672d8510872a5d0be3e7d4993d09d1ea103acd)
This tool was just badass! 1200lb max lift!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121027_170927.jpg&hash=47b7f9c5d023fb1e4ea9e682c1a12330b380ac6a)
A closer look at the top fitting.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121027_171926.jpg&hash=8e06cd6798788f35d77113b133ba78b1c6e7a295)
Rewire is clearly visible in this pic.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121027_171820.jpg&hash=e5288ede8bd1151d3ebf82b18c43b351106e751d)
Another badass tool. Hand crank pump just for gas/e85!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121027_175833.jpg&hash=bb01c4e63e8e859910c88600408ef998dbe9f43f)
Draining about 6gal or sweet e85
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121027_175842.jpg&hash=9c8b26843aecccafb9585aa1e9bc864222133956)
The man hard at work prepping the new tank.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121027_175849.jpg&hash=d39b54e6ac46a27e796cc444d96a50447d24230b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121027_175857.jpg&hash=7428cfeb0c5d14ebe86e20d3ccd4860a3aa46890)
Going it.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121027_181218.jpg&hash=2dd9a3246e25dac1b2b7869763c72ddb22c79789)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121027_181418.jpg&hash=d0a94ecd015cf78eee1f29782295555cf100d694)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121027_181424.jpg&hash=bb6f13004d543599bedb9c49c863d8ad65be486c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121027_185524.jpg&hash=9caeb41c9d5f4b48b7da32aa31305fc892f3fb2b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121027_185531.jpg&hash=da6f953dd633322392e5aecc6095fe3cfef35b14)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121027_185541.jpg&hash=f6e01da1f10a7a6583468eb0c0aaf8072232db65)
A closer look at the -6 line
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121027_185547.jpg&hash=9375128b06c8dcf240fa58382da85986f54fdabb)
Big thanks to my close friend for the help!
Hoping to make it to one of the last events of the year on the 11th, have some work ahead of me!
-
Are ya spaying any undercoating on the tank to keep from rusting later?
-
Are ya spaying any undercoating on the tank to keep from rusting later?
Thats a tank out of a 90 crx that guy claim it was the same one from factory, so 22 years and looks MINT! This crx wont ever see snow again, not to worried :noel:
-
You should have set it up for a sump system, and just capped off the feeds untill your ready to use them.
-
You should have set it up for a sump system, and just capped off the feeds untill your ready to use them.
I dont think ill sump the tank at all, I rather runn a bit more gas and not worrie about it.
-
So since the last update the crx still needed a few small things and a new battery tray. Friday and some of sat working to get ready, I spent some time going over everything and making a new battery tray out of some angle iron I found laying around.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121123_141716.jpg&hash=6f94a439ba188cce132b6a24a82f4850a1a85d10)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121123_141703.jpg&hash=cb9d9ff51bcfa69f10b69ed8dc5c14923e198524)
I really wanted to keep the battery in the engine bay but due to space the only place was on the back cross member.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121123_142537.jpg&hash=ae6528a5daff11c76a5648b26b42c67afcc8067e)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121123_142532.jpg&hash=575517defbd5d8a2dda771a6e359fd4ef4e48096)
Once that was out of the way It was time to fit the bumper, I ended cutting up the bumper a lot to get it to fit right.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121123_153214.jpg&hash=bf9c43d5e5e41b138df3964c3e63218d5cb13c3b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121123_153206.jpg&hash=eba9b0afb53ecf70039355d4b766dfa4c77e270d)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121123_153249.jpg&hash=ba27b02d1971b91cd8411bd1b85196d02fd73a6d)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121123_153220.jpg&hash=3dcd72e5a33f2de46adeccadcd45abb23768e960)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121123_153240.jpg&hash=f32ef6c26201df429ef5c964a16c2d6e58c6a9c0)
Next up was a catch can, since I was all out of supply I resorted to a nos bottle I had laying around.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121123_153227.jpg&hash=ccde4e2652eaa903486964d75ffcd9fca5d3cda4)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121123_153232.jpg&hash=73f2752f06ab954d5959c3f12dc9b6102550ac74)
At this point I had reserved a trailer to tow the crx down since I didnt feel like using the tow bar witch ment I could install the axles and get ready. Driver side was in under 10min, the passenger side took almost 5 hours.....
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121124_140137.jpg&hash=776e38041f89576e409784d1477c23b9a3aba0c0)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121124_151303.jpg&hash=fa9bac99f8e3033e51efeba5e61c8ad06b34449d)
I broke 5 craftsman 1/2 ratchets, 1 1/2 snap-on breaker bar; lots of heat and a baller snap-on gun was what ended up getting the damn axle nut off....
Sunday, fresh off the trailer and ready to go.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121125_091741.jpg&hash=414aa2dc5b526fc9ca6f5038b676b75f0ade6f3a)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121125_091748.jpg&hash=cacd1b55f4c714c23f556f2ccc368bc3790b80c2)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121125_091755.jpg&hash=486678ea809b08785c827913abda182317903dcc)
At this point I was pump, car sounded GREAT! I was letting the car warm up witch took forever to even start due to some e85 blues (super cold weather). Car warmed up, fan kick on, rev'ed it a bit, then.............. R.....I....P..... crank pulley.......................
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121125_095634.jpg&hash=646e3598fb0cb61afa40da83ccb2a3e03ef3cac3)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121125_095834.jpg&hash=894613d2532e603ac18d4a098d17bb4a962bfc52)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20121125_095844.jpg&hash=4347615355495ae6871ea1cc0b2d35d4a274c574)
Track day was over, I couldnt get a pulley in time to make a pass. I also got hit by some of the broken bits. Lucky no one got hurt and I believe the motor is still good.
I dont understand why it blew apart as this motor has been together for over 30,000 miles...
-
Ouch that sux. :noel:
-
damn man, sorry to hear about the crank pulley blowing apart. did it screw up your timing belt at all? that'd be my biggest concern. i was hoping to see this beast do a run or two down the track.
-
shitty glad nothi horrible happen though
-
Ouch that sux. :noel:
Shit tell me about it, I was 10min from running it for the first time :-X
damn man, sorry to hear about the crank pulley blowing apart. did it screw up your timing belt at all? that'd be my biggest concern. i was hoping to see this beast do a run or two down the track.
I check timing, looks like its dead on, hell even the alt belt still looks good. Last track day this sunday, not sure if I will be able to make it.
shitty glad nothi horrible happen though
I had a small chunk hit the top of my forehead were it meets the hair line, mini cut but that was it.
-
Trying to hit the track this coming weekend, wish me luck!
-
There are still tracks open? I'm in Florida and my closest track is closed
-
Trying to hit the track this coming weekend, wish me luck!
10's!
I demand 10's!
-
Trying to hit the track this coming weekend, wish me luck!
10's!
I demand 10's!
+1, or blow shit up :noel:
-
Trying to hit the track this coming weekend, wish me luck!
10's!
I demand 10's!
+1, or blow shit up :noel:
+2, without blowing shit up would be ideal.
btw good look homie, YOU CAN DO IT!!!! ( in rob snyder voice )
-
There are still tracks open? I'm in Florida and my closest track is closed
We have 1 or 2 more weeks depending on the weather. There are 2 local tracks still open.
Trying to hit the track this coming weekend, wish me luck!
10's!
I demand 10's!
Didnt happen, got 1 shake down pass and it was slow.
Trying to hit the track this coming weekend, wish me luck!
10's!
I demand 10's!
+1, or blow shit up :noel:
+2, without blowing shit up would be ideal.
btw good look homie, YOU CAN DO IT!!!! ( in rob snyder voice )
Had a issue right off the trailer, alt belt rip apart (same belt that was on last week when the crank pulley broke) so a back up one was put in place.
I thought it would be best to do my first shake down pass on street tires, lets just say it was a bit much. I took off from the light easy boost hits super fast and instantly points me towards the wall, start fighting the wheel and granny shift into second. As soon as it goes into second it hits full boost shooting me towards the wall again, had to let off the gas, shift 3rd boost hits same deal. Went to shift 4th and the whole car got WAY to sloppy so I coasted a 1/3 of the track. 14.7 @70mph 2.2 60ft
I could have got another run in, but after the first run the alt belt had flip on itself and was about to shred apart. Alt and crank pulley do not have the same number of teeth.
So what I learn on that pass, I need to do some improvements to the traction bar. As power comes on caster is moving a lot, to the point that if I was on slicks it would have been in the fender. Street tires are a joke, but I think it has 12's on street tires. Rear suspension needs to be gone through. Alt pulley needs to be changed to match the crank pulley. The welded diff is getting old QUICK so thats going to be changed over the winter time.
Last I did weigh the car, with me in it the car is 2180 im about 220-230. Crx has not been gutted, I think ive only added weight.
-
Do you drive it on the street with a welded diff?
-
Do you drive it on the street with a welded diff?
Not at all its what is keeping me from driving it on the street.
-
Oh. Lol. I was just wondering how it handled pushing it through turns. I keep thinking about welding the diff on my grm car, but autox is a huge chunk of the overall score. I'm pretty sure I'm better off leaving it open
-
Handles like shit, dont bother! I can bench close to 400lbs and was having issues turning with stickier tires. Also the whole car bucks as it goes through a corner upsetting the whole car.....
-
thats what i was expecting to hear. it will get a spool after this years challenge. it wont need to turn for any reason again after that.
-
thats what i was expecting to hear. it will get a spool after this years challenge. it wont need to turn for any reason again after that.
I would expect the spool to be the same way.
-
Yea, I'm sure it will. The turbo car has no title and will be 100% drag car after the 2013 grm challenge.
-
Yea, I'm sure it will. The turbo car has no title and will be 100% drag car after the 2013 grm challenge.
I think income tax time I will get a lsd, rsx axles, and k-seires hubs and hit the street.
-
Did u read also u can use 90-91 prelude si hubs for the same effect.
-
Did u read also u can use 90-91 prelude si hubs for the same effect.
91 prelude is 4x100 and use a 36mm hub????
-
Yup same thing im gonna do to my da
-
Yup same thing im gonna do to my da
Saw a thread about it on honda-tech, but was a bit confused what bearing you would use.
-
Teg bearing with accord inner race
-
Teg bearing with accord inner race
For some reason it just click. Man I need this semester to end....
-
its been a month.. what have you been up too.
-
Did u read also u can use 90-91 prelude si hubs for the same effect.
91 prelude is 4x100 and use a 36mm hub????
I don't know about the hub size, but I can confirm they are 4x100 for sure. I had one that I swapped wheels back and forth with a crx I had.
-
its been a month.. what have you been up too.
Nothing really been trying to save up some money and redo all the suspension at one shot.
Did u read also u can use 90-91 prelude si hubs for the same effect.
91 prelude is 4x100 and use a 36mm hub????
I don't know about the hub size, but I can confirm they are 4x100 for sure. I had one that I swapped wheels back and forth with a crx I had.
Thats good to hear, but there are none of these cars in the local junk yards.
-
24's are in my garage waiting for u :noel:
-
Love the build. All the effort is going right where it counts. That pulley shit is retarded. Superdamper time?
-
Love the build. All the effort is going right where it counts. That pulley shit is retarded. Superdamper time?
I through a more beat up pulley at it and made a pass :noel:
-
Here is what I have found out about the 90 prelude hubs. They will actually work with the 36mm axles, and they are also 4x100.
A key thing I found out was that the 90-93 integra shares the exact same bearing so you could essensially press these hubs right in the same as a stock hub.
Here are the dimensions of the bearing:
Metric (mm) Standard (inch)
Inner Diameter 42 1.6535
Outer Diameter 78 3.0709
Height 41 1.6142
As for it fitting in the 94-01 integra spindle using the outer bearing race from the prelude hub, it does work but is sloppy as the inner diameter of that bearing is 43mm so it doesn't fit tight in there. But once you torque on the axle nut everything seems to stay tight.
-
Nice so my da is ready to go
-
Here is what I have found out about the 90 prelude hubs. They will actually work with the 36mm axles, and they are also 4x100.
A key thing I found out was that the 90-93 integra shares the exact same bearing so you could essensially press these hubs right in the same as a stock hub.
Here are the dimensions of the bearing:
Metric (mm) Standard (inch)
Inner Diameter 42 1.6535
Outer Diameter 78 3.0709
Height 41 1.6142
As for it fitting in the 94-01 integra spindle using the outer bearing race from the prelude hub, it does work but is sloppy as the inner diameter of that bearing is 43mm so it doesn't fit tight in there. But once you torque on the axle nut everything seems to stay tight.
Yea saw that to, I think im going to hold off until I can find some cheap or axles start saying FUCK YOU :evil:
-
Small update, havent got much done but have been slowly ordering parts.
My single most expensive part for this year, new Mfactory LSD courtesy of Aquafina (DSO Whoopee Doo Racing). He gave me the best price and really help me out would differently buy from him again.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130403_212642_zps8baaeca6.jpg&hash=1d89b0eaad37e7ae30a447663ba3f581a807a68f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130403_212705_zps8d8cf544.jpg&hash=d50a522f5f209e3cf1d07c0e4a53bf99f173b08c)
I barely got the box open when this guy came flying to check out the lsd.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130403_212732_zps2689918a.jpg&hash=49f3921c1031e8685e3dcce19c90888e62a38eb0)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130403_212713_zps2cb30b3c.jpg&hash=3c71baa9db6222d19b22d0b8f3b491cfe4706504)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130403_212722_zps7a6fbdda.jpg&hash=8e5342822abe0197212d99cae11451d698471015)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130403_212744_zpsb1c48b84.jpg&hash=31147a9462b4e67a157214340c88bf9a5b26e159)
Needless to say he apporved :noel:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130403_212747_zps1a9ddca2.jpg&hash=a0f77cd434c0b5df3e1e3712bace85da850217bc)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130403_212751_zpsf2b867ef.jpg&hash=b4a09a313b17d214386d8027be922762a89ec7d2)
He left and on I went to look at it. Diff bearings!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130403_212831_zpsc87f6d1a.jpg&hash=899ed1964917cd202c681209446ffc2ea8019914)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130403_212848_zpsab2e4dcf.jpg&hash=972f8f29c28fbd935d3a68f594648b5ae128d271)
Sneak peak
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130403_212955_zpsd7341579.jpg&hash=ff8d734917d4945bfc1d3651bbcded744acf520e)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130403_213003_zpsdb0d4674.jpg&hash=3cb9cc2a5bd88a54182f73a69c1a2aef2afb8598)
Looks SOOO GOOD!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130403_212903_zpseb0d2fb3.jpg&hash=e164e564ff18ab9c45b2a4a56612504a1fb614e5)
Then the feeling you get when you get some new parts ;DDD
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FA0XXZfju_zps44a2e9a7.jpg&hash=b7a2704372ac090e2dcd1c27239a66ab72e4dcfb)
-
Well looks like its been a while since I updated this..... Good news is work has been going down last few months. I was able to get it to NC this year but clutch issues stop us from breaking the current vitara power record. Anyways onto the pic's!
Back in Dec when I ran the car I notice the suspension was so warn out and needed to be replace. I tore out all of the suspension to change the bushings at the start of June. Time was limited since I had to be in NC on the 21st of June.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130601_161925_zpsa4af16e9.jpg&hash=39f99cdb0cb67f878620fe2e83e25fbe31f143be)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130601_161935_zps102c94e6.jpg&hash=729dcff156d419eff375de10cacf53fb76942050)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130601_161942_zps8d831ceb.jpg&hash=52c162be25a75df60f1d2bab0e7a244509db372a)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130601_161948_zpsef1d9c1c.jpg&hash=c16cfb390db5c7bc6556c760d5a1b820f2e9f3dc)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130601_162001_zps8d4d613b.jpg&hash=0349f3266c50c2a057564751a515170e5c2e526b)
All of the suspension was warn, beat, dirty, greasy, and grimy I cant even recall the amount of time it took to clean everything up.... :-X
You cant beat all new bushings all around. I was able to replace all of it!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130604_202355_zps1b1c1ec5.jpg&hash=6c8d7dc0b7b58f2768778d5f810627c7b0c8155c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130607_184144_zps6cf48241.jpg&hash=329311776a208377c8236b8919b02152343d0681)
I like this pic as you can clearly see what needs to be done for the home made B2D
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130607_184157_zpsb3731852.jpg&hash=ac370300e5e4da79c8b9731fe5ec6492e78d0126)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130607_184201_zpsfaad3695.jpg&hash=a536055587788da69d10c6c91c38f7f8899ffd93)
Lil JB weld and she would be as good as new....
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130607_191628_zps240a4ccf.jpg&hash=cbb26fdeb6af1895429ab02990ba8b56b7f717f1)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130607_191634_zps31515b18.jpg&hash=122b6c97ea02b79c16e1fc4a140503406c6b0846)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130607_191637_zpse6f33fb1.jpg&hash=575d9dc40bbd0eb1f733d534f1682e419152aa05)
While I had the rear cross member out I saw how few spot welds where used so I beef it up some.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130609_133902_zps181ad036.jpg&hash=da5fc19c2b96edcc1717f69325a5fd386d5b8b37)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130609_133907_zps6eef5d7a.jpg&hash=863c05cea09d7e616ebc442028456352b9053730)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130609_133918_zpsb7fbda54.jpg&hash=54464e03c51a387caf7e0df44e89c03f52a7ecb3)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130609_133922_zps98541c3c.jpg&hash=57c9cd30f1f67edf2ec5f27223a8dd64a2a233a9)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130609_133938_zps8b142469.jpg&hash=78eabddc2adf8ca01d68472f96215f3263047d46)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130609_133941_zps9ffad7da.jpg&hash=6daf6b48fda4dd5694b9649c5da56035841a15cd)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130609_134343_zps34dde8c2.jpg&hash=58e04b4881256ab2861fc867e63275f3285d1880)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130609_134401_zpsa94b1caa.jpg&hash=9fcbe00058c7bdae024ab02b474db2afd7446513)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130609_134419_zpsefcf81a8.jpg&hash=796d52851e4216bd0f512b15e9b16f99b0a89532)
A few more shots of the OE 200+k RCA bushings.....
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130612_193753_zps7123f0e2.jpg&hash=f2a5f84d9131ddeb4a5080100897d29cd0243298)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130612_193813_zpsee8970d4.jpg&hash=fe19ac0881b944d24629de5430e00ef0a753e571)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130612_193837_zps8f989ee0.jpg&hash=a819421be5660dafac28b405fc0e4b63b2ced6b3)
With the trans reinstalled and all the suspension bolted up it was time for her to come out of the dusty corner.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130617_164714_zps36e0c14f.jpg&hash=d6e5093b7a64504596dd72e0de06913e113b8b74)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130617_164720_zps0e641502.jpg&hash=bf49821293e2724a57b9bfd00f0fbd4ad689233b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130617_164725_zpsdc4a9a8d.jpg&hash=3b242dec6633c7d6a184317f882208d3116a2190)
Time for a wash!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130617_170646_zps6cc2145e.jpg&hash=ea84958f0a1cb44eafb39deb0d5f300bcc6dad1f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130617_170652_zps81272edb.jpg&hash=0ba3a85250c0a32993140c4a02b6abd273658431)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130617_170717_zpsa5eae2e3.jpg&hash=263bc0d21a34593c8944a22cdfb6d3eb36c01c60)
I thought this was funny.... A friend forgot to install 4 of these lil guys and well pics speak for them selfs.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130617_200320_zps24604921.jpg&hash=86f74c20c52b1063b6815fcd1d744ebe591eff2c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130617_195309_zpsc59c1311.jpg&hash=cbf8ba0b3d5ae0dea3b8e0a1ed86e8052b8b0a5c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130617_195330_zpsc8bf4603.jpg&hash=b14df9e297fcee310f51aafec992415680438a7a)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130617_195443_zpsb0ab2341.jpg&hash=575c980859478bc0201b8d00689e59d9cd623d73)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130617_195636_zpsad909ded.jpg&hash=bb9bc2023024658969dd2eb51914eeb0aaaf2f63)
Before I left to NC I need an aliment BAD, she was all over the road as I flat land towed it to a friend garage.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130620_192031_zps8d045bf2.jpg&hash=47dfb351b4fcf41e583e4fa34f137f84fa8f069c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130620_192043_zpse12fff87.jpg&hash=5cbf79e5e12c0b76f296abee019cff27af5b6c8e)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130620_192055_zpsf04ef02c.jpg&hash=c1ed1035afdc6f159a54e27331d7073b16260f70)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130620_192119_zps68e0349c.jpg&hash=0b28e1553256a16049c3279649f34c0370c5ea03)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130620_192129_zpsf3741239.jpg&hash=80c12e94829a0f91d94a0a3390b60984a6dc3be9)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130620_192140_zps32bd949e.jpg&hash=19e9e3224ab31ef542dfc07c378458698fb573e1)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130620_192210_zpseb0af2cb.jpg&hash=74d74cd1dce4dfa963ef6120832b08e928002cb2)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130620_192225_zpsebe80824.jpg&hash=9f208bbc96998ca5554f719c391e0a3852ae9ba5)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130620_192236_zps20e5a95d.jpg&hash=0f4661ca5b957205656c1b3ad5ba65ceb156d03d)
As I arrived at Redline I caught JD working on a gaybar.....
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130621_172713_zps2a7a58dd.jpg&hash=d7f00e31727ac14fc4f39cafeea44e115f588c68)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130621_172747_zpscd05fd9e.jpg&hash=010191c511b32367268abfcbed4431399c663dad)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130621_172738_zpsb7424381.jpg&hash=ecf0da37b8798d0414b8690522cd349fa0f0d8e8)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130621_172720_zpsb513eec7.jpg&hash=1792d1101512b96b6a7e67b1395992e207a8a9fc)
This thing was the size of half my crx haha but it look so badass!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130621_172727_zpsbe011b5c.jpg&hash=aee29cf4e51a12531105e6af3437e0433bb0048f)
Hotel was badass
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_102840_zps5664fc41.jpg&hash=e1cfdf9411391f4c4b1a343d79a8c5a61a4dfa7b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_102851_zpsf56dfc8a.jpg&hash=2f27fe017c213fd9a7f9981d472783bbfe8f7f71)
One of the single most badass pic's of the trip! 15 stacks of ribs, lil moonshine, beer, and more liquor!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_112045_zpsb6d588ae.jpg&hash=6458c478564a9cfd39a231acbe935ac3291a244b)
Whats a dyno day with out RIBS!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_125902_zpscda6e3fd.jpg&hash=c52e17f586db1e7984a60d99f0de945e488a958b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_125907_zpsf72e5b70.jpg&hash=7899bc1884b3cac60a0da882eb398efa64594b84)
The man Robb hard at work making some tasty, TASTY RIBS!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_125917_zps868f3c36.jpg&hash=9d86edcc0b9966a0c752de0687f233dc7058f355)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_125921_zps42327f0b.jpg&hash=cdfb62bc58e80c9ea2406630fb371df6f8193b16)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_125928_zps7927408c.jpg&hash=9815fd55810d22a30033e16860b5b1fd55054e07)
Ron was not plastered at this point....SHOCKING
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_125939_zps4140f236.jpg&hash=f6c3558353d53f0b53c4d5186edfadef7e1207a3)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_125945_zps72e9bfaa.jpg&hash=853195ad42a2817b6ca14cc5689bd4623c3b6a0b)
Mustered bbq sauce which at first sounded nasty to me but it ended up being super tasty as well.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_125952_zpseee39ba3.jpg&hash=1d4538665c73898bfadd99f3d7c53de81c3ce685)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_125956_zpsbad69901.jpg&hash=7358b08a42e03e396ef9c07b54751bf1c4ec2951)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_130001_zps1c54fbbd.jpg&hash=fc6b9fa0b96be6f6b964b83239b464c7bc7c3aa7)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_133655_zpsf5934e77.jpg&hash=31c18f1f16fe5916ba8bf89f6d000d5a067eafc0)
Fowee was up on the dyno. Man this car is SOOOOO clean, no rust at all. Also for making half the power its such a badass car with a power band that instantly puts you into the seat.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_151648_zps9a943b15.jpg&hash=a6a3c13dc9c6c6095982990915152d02ff245fc5)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_151659_zpscb1b8a8f.jpg&hash=7c4a95864be40e35e989625b9dcb1cc0830b2d60)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_151706_zps2453d573.jpg&hash=70f38ccf404017c1a866793db202d04eb09e2bda)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_151720_zps0e297a26.jpg&hash=4e895807bea65164c1dca30c78a987608ddd35d0)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_151904_zps650b44e2.jpg&hash=0473ab3eda587983022f52f483826b6cdc90ea3b)
Long lost brothers hahaha
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_172649_zps25171911.jpg&hash=9d7eb4e6e39dc3760a80582842e4d6c1084c366e)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_172655_zps0bd6f194.jpg&hash=1449e5a96be025ac76a0089cd4e7782854de68f9)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_172703_zpsbf1df13a.jpg&hash=2ea3c48c7510ed6404d894c733de678710825ddb)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_172706_zps94ba8f4f.jpg&hash=76116463eeda548518f354cd984fde5a4c932c19)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_172717_zps504f1546.jpg&hash=13f0e2672114080dbce58ab3c937cf632d48a356)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_172728_zpsf39cc8b6.jpg&hash=cf5d957ec7ed35488bc571837fe231f41d5c18b0)
You can never have enough hotwheels!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_174624_zps695224ff.jpg&hash=4131d0e9ff5aacfa2c8933098fdf905f67f0e8c8)
By this time Bubba had showed up with some pulled pork he smoke for something like 12 hours. If you never had some Bubba smoke meat you should be ashamed of yourself.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_175153_zpsee5c1077.jpg&hash=ff024849fbc1f69aea3d7592af03ca654cb7e141)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_175200_zpsf025bf6b.jpg&hash=59497a8e100b09610293c79064259c463e6d490c)
Some local and his M5, it made close to 450hp
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_183939_zpsd5a22fd8.jpg&hash=22ea51ed9667c0fcc1b74126cbfb6307f7c9b66e)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_183957_zpsc3bce224.jpg&hash=8751f04374bad1cf15428fff94519b13405cff58)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130622_184007_zpsf0b07964.jpg&hash=00aacc4f09776a9457f95ae96cef2e037fdbeafd)
I am sure NO one has ever seen this in a honda ecu. JD wired in a solid state relate to trigger the firing and closing of the Nitrous through the ecu
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130623_001745_zps07bfd338.jpg&hash=d0da616bbf16a397b97ac554e9155cf9121a57dd)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130623_002324_zps31e700cc.jpg&hash=22cb1c37db82f7cd262698d4192648aa48f0e636)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130623_002329_zps6569a434.jpg&hash=1af335a0241f8928384f888b33a92fe24d4cb753)
Jason shop car, man did I want a ride!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130623_111714_zpsb152d196.jpg&hash=025c4c8f890ad99493587b46e8ba5683d31a29b5)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130623_111719_zps07058441.jpg&hash=cf874bc95d17bec2e49ffb62a22a193cb7dcf0c6)
Strip down but had clutch issues once we crank the boost to kill... clutch gave up before we got to far.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130623_112246_zps58cc170f.jpg&hash=d5051812042f894b028a1e36a2afedeb1c65778b)
No one tell Jason but I almost took his dog, what a great pit!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130623_152745_zpsbb15abab.jpg&hash=e5202798b7f7a9a9d758146634173a04c7406dac)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130623_152752_zps8991be34.jpg&hash=345a68aa0acc946ada3bb2721410e192306ea2c1)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130623_152755_zpsec6f0aef.jpg&hash=fdbef29f361dc25df81299ad6204c6771d7691f3)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130623_152803_zps21fd4135.jpg&hash=aace7e0b762fd2d993e75b1607f63ae432d87c31)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130623_152806_zps92e6d585.jpg&hash=4ad4900a0913168545c0aabe7d97005acdd533e0)
VG33 power Rx7 so nice and clean. It made something like 550hp
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130623_162100_zpsafdb805f.jpg&hash=7743738eb6b03be9d67312809f723e4accd44141)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130623_162106_zps50f7b283.jpg&hash=2d1fea3950b6d994315ac1f97e895c8433693357)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130623_162110_zps8ce56d85.jpg&hash=cf9908ef1764e76453a4f2bd136f47bd99586f9d)
Getting gas before leaving NC
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130623_163015_zps1c3786fd.jpg&hash=86dcea314b45091744d90504369113fc7f3d8484)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130623_163024_zpsb5e291c2.jpg&hash=789a018b74c8cd2748a4cacafa147406e890d3cd)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130623_163028_zpse194a0c8.jpg&hash=fd345c6d89ef475f27d986c3c8f51c6e165878cf)
Tow bar FTW
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130623_163039_zps5ec95d18.jpg&hash=428b2f337999d8283ba4ac169f99679d51cf1bc4)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130623_163044_zpsb99e1021.jpg&hash=3a35b53da6bfc763c164895290aaad8d57185f6e)
So some of you know I lost the fuel pump on my yukon once I hit D.C. it died 1 mile past the pentagon. I was able to get the cars off the highway but ended up having to tow them to the other side of town to get the pump changed. What a pain that was, between the tow, labor, and fuel pump it was a $800 day.......
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130624_105950_zpsb13d1d71.jpg&hash=8039a20544280f3a65a7c08802ba30bcf60c4ddb)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130624_161640_zps2c4cf146.jpg&hash=3691059d675dc7e929a8f0a29fb7c4fb1fecb25f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130624_161648_zpsf778df34.jpg&hash=efb1c386d85c975e95a97c107bd1a2566963a343)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130624_161713_zpsc83e4d25.jpg&hash=2117b7ba906582423fe3694e47c7867c05411b36)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130624_161716_zpsaebd0078.jpg&hash=1366b88549a1ddc3ade09d2e0e2388acbf2bc09a)
Damn tank was FULL, the tank is about 6' long and 2' wide......... The guy didnt release how much gas was in the tank until he took a shower in gas....
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130624_161739_zpsf2199e7b.jpg&hash=bc45e99b9434415c2e904353af6a5a2b5685b24d)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130624_161748_zpsa59fd18e.jpg&hash=71e104cee6d51548cb8a729bc4113544ea1000bd)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130624_161804_zpsfed359a8.jpg&hash=7a9c00f23f9495d941188ec17b0857005d1f7d1c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130624_163516_zps39b60e2a.jpg&hash=90e2360e174db8d0f4ab568e877e330155a024a2)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20130624_163525_zps0a2ce6dc.jpg&hash=aa985fbded08e3356af17e9075816d67dca9463f)
Anyways thats it for pic's, onto the vids!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fs971.photobucket.com%2Fuser%2Fcrxvtec91%2Fmedia%2FProject%2520Phoenix%2F20130622_163951_zps43007514.mp4.html&hash=4f1f55b3f22db28e4b96a651065d1df00653efed)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fs971.photobucket.com%2Fuser%2Fcrxvtec91%2Fmedia%2FProject%2520Phoenix%2F20130622_184309_zps3e899e50.mp4.html&hash=284775de8eadba43c9dcdf404a02adefe714bb8a)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fs971.photobucket.com%2Fuser%2Fcrxvtec91%2Fmedia%2FProject%2520Phoenix%2F20130623_111517_zps80b70691.mp4.html&hash=fdda0a18c7fc5db828b67265cb7987d8a26c0bcd)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fs971.photobucket.com%2Fuser%2Fcrxvtec91%2Fmedia%2FProject%2520Phoenix%2F20130623_113130_zps2b31d6b2.mp4.html&hash=16b1b604d20b7580d4134a6d1778747d391cbf9f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fs971.photobucket.com%2Fuser%2Fcrxvtec91%2Fmedia%2FProject%2520Phoenix%2F20130623_140624_zpsabff3e3f.mp4.html&hash=bf75e600256911d88b81d7c62ae002f9ef6220df)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fs971.photobucket.com%2Fuser%2Fcrxvtec91%2Fmedia%2FProject%2520Phoenix%2F20130623_021010_zps5093ef24.mp4.html&hash=a4d4fd64e03ee1593ef7c88ee184093140300854)
Despite all the issues I ran into along the way it was a great trip. I just want to thank everyone that was around and gave a helping hand. From my friends in NJ that help when I was down to the wire to all the guys in NC and back!
-
RIP.............maybe...........
-
Well may have hurt the motor.....
Need to pull the oil pan and inspect.
First time ever on a pro tree.
1st pass- 12.6 @ 130mph with a 2.4 60' I bog bad and forgot I was on 30psi
2nd pass- 11.7 @ 115mph with a 1.74 60' on 18psi lunch could have been better
Pass 3-5 a mix of 12's pass due to alt belt issues and pro tree noob.
5th pass oil light blink then went solid as soon as I went into 3rd, I cut it off but it doesnt sound right.
11.5 index! What a badass class, I qualified 15 out of 86.
Fast forward to 2:30, I lost the alt belt half way down the track in this vid. Dont recall what I ran in this pass.
Syndicate Auto Salon Honda CRX: Honda Day 2013 - YouTube (http://www.youtube.com/watch?v=LcfEj1PlQ5Y#)
Last run where I hurt the motor. Guy in the ek was a all motor k24, he cut a 1.6 60' and I cut a 1.70 60' in this pass. His car was super heat soak, when it was cooler he ran a 11.2
kunithatch - YouTube (http://www.youtube.com/watch?v=p9Q45gvDURI#)
Bounce Spoon brought this car all the way from Japan just for the event!
Spoon Sport Civic (E-AT) At Honda Day 2013 - YouTube (http://www.youtube.com/watch?v=SzqoL6BNnr0#ws)
-
RIP.............maybe...........
NO!
-
RIP.............maybe...........
NO!
Got to pull the pan and see whats up.
-
Damn it has been a while since I updated this!................
Still havnt pulled the oil pan but I did fire her up 2 weeks ago. She sounded good but the oil pump is done.
I spent some money, want to make sure im not going to have issues once she is back on the dyno.
First thing first this baby needs a new IM. The stock ported z6 is holding me back I feel. Time to build a new one!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140319_172743_zpsb604f0b1.jpg&hash=ef3d68625fb356badadfa0ad78e8fe5b6fc8bc3c)
Next up the damn clutch died on the dyno stopping us from making any more power. Couldnt have that again so I order this lil baby
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140323_131137_zps6e74dede.jpg&hash=f5fa82cf1a15f5c10b13a71c67d80edc2c1304e0)
Quick pic before I pulled her apart.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140329_172320_zpseb18aed9.jpg&hash=dac53290ce409a07ce215fe4f6bee8e6069ab6fd)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140330_133731_zpse1c5fe27.jpg&hash=1a1c502f2f5973ed96400df6baac79fed44d9873)
Ah twin disc for the D2b!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140330_133744_zps0050fa95.jpg&hash=6122fe08a5a51ff63dd74432d97a64527d2a1123)
A quick shot of the home made D2b, should have gone over the welds. More on that in a bit.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140330_133754_zpsb521e0c1.jpg&hash=a9728b8b0960854cfccf2b77822a8d0da6b432f3)
Buddy of mine installing the twin disc as I took this pic.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140330_134225_zpse8147599.jpg&hash=279068333d3059419ec75ed10d7d852e9d417a91)
Everything was going smoothly until we got a bit greedy with the impact gun and pulled the welded plates out of the trans for the D2b. Off we went to a friends house.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140330_153327_zps4e8cce09.jpg&hash=338b1f1fe3578f9ce132d8224e52c594801cee71)
My buddy wasted no time and started welding away!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140330_153816_zps49eeb6b7.jpg&hash=bcdf216536e3f5ec936f40ffe1a61178ad7a86a9)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140330_153823_zps68c665ae.jpg&hash=d860d6657407cc19402e856b21273ecb58f91ec4)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140330_153841_zps0ae44b8d.jpg&hash=841bd5485fd962b109b40d67fc5f1fbc6bb0457d)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140330_153845_zpsa9bc9d01.jpg&hash=b58585975e74f38ad92521104cd97fed8c7ca20c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140330_154125_zps8687a3de.jpg&hash=4b7104ebe2a3dda375df919e1dae855934175d22)
Quick shot of my friend Nissan Blue bird 4wd Sr20vet!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140330_154700_zpsa2aa0aa7.jpg&hash=2db36777f58da11eb258f81c486ec4fd62af355b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140330_154946_zpse946acfb.jpg&hash=f8d6469b31bdaa1c6dc82b7dd107277d697c8baf)
Once that was done everyone was hungry, needless to say not much got done after this. 28" pie :noel:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140330_171207_zps26845433.jpg&hash=3b23b533bc3e2a88c565a9ad5b4d5953b9964c06)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140330_194920_zps18045bd7.jpg&hash=31a4ab35836028e51087c47983e0105a70ebf03d)
Quick shot of the old disc, no part number ftl......
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140330_195120_zpsa1248393.jpg&hash=a64b47fb4e2a1ba96c28ef10ba19d7291d297955)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140330_195132_zps31338292.jpg&hash=21158501ed076fc956e404a0f89d9cbaa16b4500)
-
Wonder how the IM turns out?
When installing twin disc, do you have to do anything different to clutch master set up?
I has adapter spacer for use of a S2k clutch master ready if ya need one at a super low nog price. :noel:
-
Wonder how the IM turns out?
When installing twin disc, do you have to do anything different to clutch master set up?
I has adapter spacer for use of a S2k clutch master ready if ya need one at a super low nog price. :noel:
Whats a clutch master..................cough...... clutch cable...cough..... :?: :evil:
-
Wonder how the IM turns out?
When installing twin disc, do you have to do anything different to clutch master set up?
I has adapter spacer for use of a S2k clutch master ready if ya need one at a super low nog price. :noel:
Whats a clutch master..................cough...... clutch cable...cough..... :?: :evil:
Fuck yeah. I loved the feel of the cable so much more than the hydro. I forgot how soft stock clutches were untill i bought my stock accord. Kinda want to put a lsd motorsports dragger pressure plate in just for daily driving because the stock clutch setup feels like a wet sponge. I'm curious how well your setup is gonna work with a cable.
-
So we finally gonna see this bitch on full boost and spray at the meet this year?
-
Wonder how the IM turns out?
When installing twin disc, do you have to do anything different to clutch master set up?
I has adapter spacer for use of a S2k clutch master ready if ya need one at a super low nog price. :noel:
Whats a clutch master..................cough...... clutch cable...cough..... :?: :evil:
Fuck yeah. I loved the feel of the cable so much more than the hydro. I forgot how soft stock clutches were untill i bought my stock accord. Kinda want to put a lsd motorsports dragger pressure plate in just for daily driving because the stock clutch setup feels like a wet sponge. I'm curious how well your setup is gonna work with a cable.
Tell me about it I like the feel of the cable!
So we finally gonna see this bitch on full boost and spray at the meet this year?
She will make power or blow up trying. Either way we will drink shine and eat ribs the whole time :noel:
-
So we finally gonna see this bitch on full boost and spray at the meet this year?
She will make power or blow up trying. Either way we will drink shine and eat ribs the whole time :noel:
fuck yea!
-
RIP sohc............
-
RIP sohc............
WAT?
-
killed a pump? And killed the motor?
-
killed a pump? And killed the motor?
Yea bearings on connecting rod #1 said fuck you!........
On the plus side I have a back up vitara motor I pick up for $150 :noel:
-
killed a pump? And killed the motor?
Yea bearings on connecting rod #1 said fuck you!........
On the plus side I have a back up vitara motor I pick up for $150 :noel:
Fuck the crank/rod or is it rebuildable?
-
killed a pump? And killed the motor?
Yea bearings on connecting rod #1 said fuck you!........
On the plus side I have a back up vitara motor I pick up for $150 :noel:
Fuck the crank/rod or is it rebuildable?
It discolored rod #1 and there is shavings all over. Need to rip it apart! On another plus side I pick up 3 TunerToys rods for $60!
-
killed a pump? And killed the motor?
Yea bearings on connecting rod #1 said fuck you!........
On the plus side I have a back up vitara motor I pick up for $150 :noel:
Fuck the crank/rod or is it rebuildable?
It discolored rod #1 and there is shavings all over. Need to rip it apart! On another plus side I pick up 3 TunerToys rods for $60!
Where you going to get 4th one? :noel:
-
killed a pump? And killed the motor?
Yea bearings on connecting rod #1 said fuck you!........
On the plus side I have a back up vitara motor I pick up for $150 :noel:
Fuck the crank/rod or is it rebuildable?
It discolored rod #1 and there is shavings all over. Need to rip it apart! On another plus side I pick up 3 TunerToys rods for $60!
Ouch.
-
Well this is how it started.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140406_143240_zps2cc15fc4.jpg&hash=ac9ec294452ab6d6650c5af2c4a9df25fe00ec17)
Then the oil pan came off after the trans was back
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140406_191436_zps25e4d983.jpg&hash=06415e6d4d7060267329903980f2cfaca0a7861a)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140406_191442_zps45dfdbbf.jpg&hash=8e0395437c9465bd9ef68f59b5e11c66df249ace)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140406_191447_zps1a9cd1cb.jpg&hash=2a328534f02ba96d0ffe3e0ed7650ee741a18c79)
-
What brand rod bearing and what was your clearance?
-
What brand rod bearing and what was your clearance?
I recall acl rid bearings, motor had around 30,000 HARD miles on it, dead oil pump and high rpm said fuck no!
-
Well time to update this thread.
Before I pulled her apart.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2FIMG_20130709_112329_zpsd38a1440.jpg&hash=cf61c2bc3b220e6396c00cc91719c8719ebda596)
Time for a lil clean up
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140605_191114_zpsf09bee19.jpg&hash=5a03c7fb5438e2386554cf1c75bf04fb3b1e35ff)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140607_140539_zps4806ed21.jpg&hash=fc1e1ea35a535dd673e6d9a4711174d0c7718166)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140607_141843_zpsdee189e4.jpg&hash=5036894321ed94d68f1c250470d79dd96530dd21)
1" spacer
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140607_142112_zps7c924a4e.jpg&hash=099c3a869bc474283d2d97961ceb3c9a7a2ccc19)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140607_145616_zpsca1712b5.jpg&hash=a08de85307d960f6eeca53c5358eacd2ed8b6819)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140607_145747_zps5f582a4c.jpg&hash=d02ac564d755d76e87eb84a911aede40b073c446)
"Stock"
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140607_145831_zps341509a2.jpg&hash=9f7ad77c6b627b83f76ed79fdf961708efa87ddb)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140607_152618_zpsd8e52fe5.jpg&hash=29fccc39489f2f7796eeed7ba0dfcfefe64586de)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140607_153917_zps22cba3a3.jpg&hash=363995d30a9c6a2db699e000a1cfea04010fcc7c)
And she was out!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140607_154249_zps70e40c84.jpg&hash=c771f08d6ffb79f80d97db5440f6fe63aa2b936d)
Twin disc goodness :noel:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140607_154556_zps347501cb.jpg&hash=5ffac38cd1f416a1665d3d5116f8ad188d698a86)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140607_162209_zpsa392e36f.jpg&hash=f6d546dbe506af688c5ad40c848f247ed3d71f9e)
GF bought me a 8 point S&W cage ;DDD
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140718_171757_zps8ce8937c.jpg&hash=e9a780ecb927bebaed062be7fedf0b7cc6ab6531)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140718_171813_zps954849e5.jpg&hash=606335a52c217bba189e27699835d13d8ef67043)
This is when I ran into some issues with the block, took some time to figure out what was going on before I could rebuild. Slap a old school TunerToys rod in then 3 fjt rods.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140719_173358_zpscb46f4b1.jpg&hash=e949671a9b22ed710aa2b22e0ad398d6f4aede9a)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140719_185333_zps0bc9361c.jpg&hash=e33e24b5693d426e8c6f2f97bb9e746a23f1c720)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140719_193116_zps08a13d1c.jpg&hash=8a0c210a4b9a323b908691ff143e559dccf16011)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140719_193137_zps9c1b8e49.jpg&hash=fe802f2a90dc06a7cb01621096a6bd023a751e0c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140719_201521_zps2b37db61.jpg&hash=855764943f8cebe39c4c4b27cacfe7eb53339c3d)
This had to be the smoothest install ever!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140802_150316_zps4e135bf5.jpg&hash=5cf9b6eb9336f477968832c4e0ea742cc144bd15)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140802_154550_zps8f817cbf.jpg&hash=b805b6c9827a63fcaa8261d824ae7f64ad60fb19)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140802_174110_zps1192a5af.jpg&hash=32085bcee4c75f2ef399ab88d4a45dbeb87bc6a8)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140803_145003_zps7cbf7f50.jpg&hash=b321f06d985caa6b916621c72f8179548d30ea71)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140803_161438_zpsca75fd33.jpg&hash=741a28f717f39f8a90d55a0968f49ac39f366cac)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140804_214248_zpsecc73b1d.jpg&hash=42b6771087fb0f255eacadaadb85e7d20d3c1464)
Injector Nation FTW!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140807_183207_zpsdf1fbe6e.jpg&hash=a1ce4e7da48a29d541ebb71fc0e5e28ade2aa502)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20140807_183217_zps0c2c63ac.jpg&hash=2189ee034e94b6988f42c311e04afa232392065a)
She almost running, having a issue with either the coil or dizzy, need to sort it out and she will be back!
-
sweet
-
This page has 200 fucking pictures in it and take my phone like 30 Seconds to load them all....lol
Just noticed, but did you ever use the nitrous with this setup?
-
Will you be racing at Honda Day? I wont be... got work tomorrow.
-
sweet
:noel:
This page has 200 fucking pictures in it and take my phone like 30 Seconds to load them all....lol
Just noticed, but did you ever use the nitrous with this setup?
Haha tell me about it my phone freaks out. Still have not used the direct port............... hoping soon!
Will you be racing at Honda Day? I wont be... got work tomorrow.
Nope it didnt, had a bunch of last min issues and didnt want to rush it.
-
>:( yeah you asshole lmao I missed work just to see you an 00 black civic si run for nada but I still had a blast at hondaday an seen 00 black civic si race also meet negu flow :P.
-
>:( yeah you asshole lmao I missed work just to see you an 00 black civic si run for nada but I still had a blast at hondaday an seen 00 black civic si race also meet negu flow :P.
https://www.youtube.com/watch?v=t2t21q6q0QQ (https://www.youtube.com/watch?v=t2t21q6q0QQ)
-
So will you be at Fall Nationals?
-
Damn this thing really needs a update!
-
UPDATE TIME!
Damn its been a while since I updated this thread. I never made it to fall nationals do to time restraints, but a lot has happen.
Pic time, but first BIG thanks to The beave for all the welding!!!
Pick up some 24.5 and had the mounted damn does it look good!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20141009_212657_zpsbqpv7bof.jpg&hash=f5212fee4c2e7514d8bdd56fafcfeb6ff194585f)
Cage getting there.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20141014_181625_zps93qrnc05.jpg&hash=6d7e72bbf6c5f349e96b29b1fb8ea3acdb020e23)
Perfect angle!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20141014_181646_zpsdpl3k4dz.jpg&hash=45a3cdd1461c57afcec98e3c6832f9182b1bf8fa)
Tig?
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20141014_224203_zpscmjcoekb.jpg&hash=53b53e6ebc127cc56ad0e44adfda0c4a5e353562)
No its mig but damn is it strong and looks good!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20141014_224215_zpslh9ygqky.jpg&hash=5fbe8a5512939c8c3cd8821900d4a72688b22b3f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20141014_224221_zpsvk2g7961.jpg&hash=c665f0f799a4dd2337093e2972e8d62edb2e5f81)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20141014_224227_zpsl97xdcbz.jpg&hash=b7399ced9c00325be3148787ecaa748df97f9ee0)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20141014_224255_zpsxd0focth.jpg&hash=41f2181eecdb139f942084e466db16b3c7841e91)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20141014_224306_zpsyfmjv1op.jpg&hash=94793f16f9dc9dc859166ad757b7821ea0f87448)
Started priming before painting; damn did this suck!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20141016_204656_zpspxwijrro.jpg&hash=a02dcb0fd204f7d39b2fb100dac7e8aa3c0e7784)
Also welded in some fender braces to see if they help any.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20141018_195920_zpszcfouahu.jpg&hash=258be989923432f03099795ce67a67f25fd11cc4)
Baby Eater!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20141021_165424_zpsqphylrm1.jpg&hash=27dcfbc091bacabb25852e8bb453bafa75397e34)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20141021_165432_zpszju70zyg.jpg&hash=881e88cfe322f245e61406f19b49acc258650dec)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20141025_193102_zpsvbhkgihv.jpg&hash=0550bf79ffc51d76a32964992f26f11c34da3c3b)
Dusty but getting there.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20141025_212826_zps7mc3dant.jpg&hash=7558d252a2a7703b32c0562c99c371fa696d27ce)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20141025_215422_zpst4vgocst.jpg&hash=b638501331b375c063862a966fbfc40a375fbe5c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20141025_215429_zpscd18e4ta.jpg&hash=f93fda3aec120d7b135a173f0487689db60895a0)
At this point it was early Nov and getting cold. Car was ready and we headed for the track. Once we got there the cold weather made cold starting a pain. Also while waiting in the lanes the car over heated, fan switch went bad and cluster wasnt reading temp. My fault for not checking, we jump the fan and kept it moving. After waiting for almost 1 hour due to people breaking down I get up to the burn out box only to have shut down and wait for another clean up...
Once they were done cleaning up, go to do a burn out and lost almost all power..... kept trying and nothing. I end up pulling to the side, pop the hood and my fuel pressure had drop to 25psi... We let the car sit for 15 min, fired her up and had odd fuel pressure. The car had been setting for close to a year, I never dump the e85 in the tank and was low to boot. I choice not to risk the motor and just watch races the rest of the day.
I believe the fuel filter is clogged and or the injectors need cleaning.
Pic of the gf waiting with me in the cold.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20141026_150055_zpsdcelrfjl.jpg&hash=3db391e13230b4a4d9e6921d3d64c20dead7f042)
I really like this car, some old timer taking it "easy" running low 9's.... :evil:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20141026_153737_zpsnqp416ke.jpg&hash=a33ee74fbc39792557139b2e7d65363c3c3c6e42)
Make sure to always cover up a front facing turbo while towing it!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20141026_172743_zpsvcywbujx.jpg&hash=214a763b4834a0c72d6c8520a90057484dfa9cb0)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20141026_173008_zpsazmm0cl2.jpg&hash=12abd321b0c1b459c437aec285fe86deae67f18d)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20141026_173017_zpssocvt1px.jpg&hash=48a7cc85c79e6fa4d7368a3447138185aea9e1c2)
Race dash in full affect
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20141028_182613_zpsjrpolvd8.jpg&hash=bfe66d8f014c05f0e6ea6d65d5cbf9e5fab4f1b0)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20141028_182622_zpscfqkniou.jpg&hash=4a02e16f5a03d99758c769a789aebdbb5a1313af)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20141028_182622_zpscfqkniou.jpg&hash=4a02e16f5a03d99758c769a789aebdbb5a1313af)
Whats better then 1 crx....... 2 crx! Lil side project stroker sohc
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20141109_192103_zps3fdphuk7.jpg&hash=611f821dfe7b88395d3086ee60e2eea19eb5260e)
I have not had time to check out the fuel issue with my red crx and wont have time for another 2 weeks. Plan is to address and debug the car over the winter time and start off next year running hard!
-
Details on the stroker?
-
Details on the stroker?
It came out of my civic I built it 2-3 years ago. The block is a y7, but that is is only thing y7 in the motor. Crank, rods, pistons, ect everything else is from a D17, I also added arp rod bolts.
Plan is to get it running 100% and boost it to around 300hp :noel:
-
Details on the stroker?
It came out of my civic I built it 2-3 years ago. The block is a y7, but that is is only thing y7 in the motor. Crank, rods, pistons, ect everything else is from a D17, I also added arp rod bolts.
Plan is to get it running 100% and boost it to around 300hp :noel:
Sweet.
-
I always wanted to get a stroker with the K1 rods and put a smaller turbo on it and see how much tq it could make. 250/250 would be sick!
-
Well time for a update!
Clean the fuel filter and added more e85; all my issues are gone. Check the tank, I got lucky its mint inside!
https://www.youtube.com/watch?v=RB60e1H3H78&list=UUH4XgoOgcD0hdlMmdV6NPbQ&index=1 (https://www.youtube.com/watch?v=RB60e1H3H78&list=UUH4XgoOgcD0hdlMmdV6NPbQ&index=1)
-
awesome 8)
-
Dope, ripper vids NOWA!!!
-
Four cylinders are over-rated. Three is underdog and the only way to go.
stealing this, it is sig worthy
-
Im really thinking of throwing some plates on it and driving around :evil:
-
Fuck this has been to long......................
Oh well time for a update, its been a long time but a lot has happen since I last updated this. Crx took a bit of a back burner for a while, I finally finish my Masters, changed jobs, had a ton of other projects, built a few motors, and finally relax a bit.
Anyways onto the pic's.
This is how the car sat from last year.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150316_181239_zpstilldlpl.jpg&hash=eca90a5687f19c7352ea538c95f4890b2285e2b8)
Driver side mount was trash so a replacement innovative took its place.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150317_173323_zpsppzzkacy.jpg&hash=df57cd4a45e60add7875e73288f1a08ccef9e8d2)
New 1/4" longer valve cover bolts (ended up being slightly to long)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150317_174956_zpsd6b4jvy2.jpg&hash=81042fd586c88b736f3886ad3faaac7275e25362)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150317_180102_zps3uvreg9b.jpg&hash=62cadc06c8d87f429f62e311bef7db1adce042df)
For sometime I was highly annoyed with the super small battery. It was also in a hard to jump spot under the ic piping. I also did not want to move the battery to the truck, with that I new the best spot would be up front. To move it up front I need to change my IC and piping.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150319_175021_zpsir5kndgq.jpg&hash=d7b154cc3be30f31f0f53e47b64fb6fc30512656)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150319_175026_zpszfupj1go.jpg&hash=907e2bb80ed5e07d017090c37c1b35389fd2af38)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150319_175112_zpsjvsfqoky.jpg&hash=1c455f9465318c67a07154520cfe8bb35d36087f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150319_180402_zpsszenqa2n.jpg&hash=676a1a1fa8db545de2a83275753b6f818e2e2f9e)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150425_140103_zpssdy2tmiu.jpg&hash=ba614ec0718aba8d57707607a99f7dafb07a465f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150425_140515_zps98bgqor2.jpg&hash=408f18061def86eba9d86f903f12cd5869be2af0)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150425_153953_zpsenaem034.jpg&hash=fab0f0bf6bfecfaef161e3aeb7d307a80ae4fd18)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150425_154029_zpsbrwvhakp.jpg&hash=e6c47b173c39d6431caf632b8c79af2f38562658)
Next up on the list of stuff to fab was a brace to tie the motor/ trans to the front cross member to prevent it from moving under load.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150425_185613_zpsue1q9bxa.jpg&hash=6d27e27e99ba2a586b8cdfb169d6e7b1884334f6)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150425_185619_zpshhzostbi.jpg&hash=940404243fd8a8032e289f5f3e5ede852192e7a6)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150425_190015_zpskkjfretc.jpg&hash=23cb5dd9bdbdc81be2f283e55d77c9ef70524145)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150425_190028_zpswusnw96z.jpg&hash=3d9f06ac2a1faeab7d2a20fc30c2dd6c6eaeafa6)
Broken bisi level X, I had got a great deal on it. I sent the cam off to Rocket to see if their cam was bigger and to confirm the spec of the level X. Needs to say it was a good bit smaller then the RM level 5. Robert from RM gave me a great deal I couldnt pass up. Despite packing the cams well, ups really fuck up the box hard core. The RM cam almost fell out and took a major hit. Nothing happen to the RM cam, yet the bisi cam broke.........
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150502_124520_zps08hxxhfn.jpg&hash=71ede7fe3f48653b866ef14d968b9e8e0a04e271)
I needed a scatter shield and a drip pan if I wanted to run. I took a drive to DP, Rolando treated me like family and I drove off with some new parts.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150613_134349_zps4t8qdczf.jpg&hash=b4e357b27ab95fdb5a8fe50b299bca6814c9717c)
Joey wasnt amused and wanted to be in the picture.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150613_144009_zpsjbrakuwy.jpg&hash=3d9408d5d30434b26bbb28aaf0a421b9e60f0da3)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150613_144010_zpsmj2hsyej.jpg&hash=641112ba26480b1b0303ec986dabcd6a4d214cc7)
I made the mistake when I got the scatter shield, I had forgot there is a major difference from a hydro and cable trans. This force me to make a new lower section for the scatter shield. You can also see the down pipe coming in.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150629_201720_zpsbwrfvjqq.jpg&hash=c31bb0c55b9460b39dea5608dcb68a55231728b9)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150701_193806_zpsdhnmwupm.jpg&hash=a16cb32b64db11caa68f6ad72c42cdac5cba37fd)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150701_193859_zpsrnhyiqk3.jpg&hash=c570693089551f8fddb6ff31c471b143afd521df)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150701_193928_zpsvovx1nza.jpg&hash=dc1a5188c62cafba910aa8625df958a98e3fcbda)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150701_193932_zpskjmjthyr.jpg&hash=3854428e6f210d82cce1c338541b92df80d35655)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150702_184801_zpspv11eds5.jpg&hash=862fb40d354687181cba31f3b9c4e8bf3d88250b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150702_212304_zpsif7gwuwg.jpg&hash=5f252061fd214064883e945a458bdbb92e0e5215)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150706_191309_zpsimpq5ojv.jpg&hash=39405d6529821f5a91c37e542bebdb76e4350335)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150706_201138_zpsysmskxnq.jpg&hash=1a29d8435135d3a573657a13083a737c7a0c8c2e)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150706_201157_zpscgezpryj.jpg&hash=7a3d5c9d35721f6f8f56b9c73dfceccabce2ec70)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150706_201445_zpseo2qdjxp.jpg&hash=c735e25492cd7e96ee284df275cfb701f49b01ad)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150706_201515_zpsfnxttmsq.jpg&hash=8116c912770f95f95fe44342bfb891e81fdb7d52)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150710_193610_zps9usy9kwz.jpg&hash=176b18569b49568c12ee2181c5778918134780ad)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150710_194131_zpslymizbcd.jpg&hash=2ac0652acf30e52f51469ba9bec79f13d88e5c87)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150717_204005_zps9e9mmp7s.jpg&hash=e939b847467e08ef397dba1046f2e50ae43738aa)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150717_204016_zpsynoikupa.jpg&hash=5d4c6533a97997e5aaf617bf1e5a81c11ce8b8e9)
The old oil pan had to go, and I had came on a great deal on a old school canton
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150725_165927_zpsfpkr9n7h.jpg&hash=168014bd4af5f9b85722b7e812db93d763103a21)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150725_174343_zpsf6btcc6j.jpg&hash=e39e1e66d8dd4941402e1a2499cd50659e223de9)
3" down pipe to 3" exhaust
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150729_182309_zps3stlhqd6.jpg&hash=4953515138f331bc2e1f45c49a86fe6813d182d9)
This beer kickass!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150729_183134_zpseyxgfsuk.jpg&hash=7ce928ccb9659fd6d762de174852fa881aac027b)
Add some more bracing to the home made traction bar. I notice the bar was moving under load, could see it in the paint it had rip off ahahah
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150731_195122_zpsyfmhoelj.jpg&hash=ae48925da5f17692cc8b63bdb94ec8d4894acbbf)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150805_180343_zpstisoc83z.jpg&hash=dbbe6a8ada62a09592b8f2a096552b0e08311ed9)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150805_183857_zpsebuq04mc.jpg&hash=e7fba45142c4278480a657ecf4eacc4bb3c55a99)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150805_194255_zps2y8wr8wv.jpg&hash=61bf0525c4c9e549236d3ea0d2a26625fbb6976a)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150807_175415_zpskyhaekac.jpg&hash=d0e404dd20677d8e545e49ccdf8cdd7b2dc1b12d)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150809_204031_zpsribsz6fe.jpg&hash=b97ae24342c7807753b8e07de55ce2b19fdc85c2)
One of my bigger pains for some time had been the degrading factory harness so I pick up a new obd1 converted harness.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150811_164502_zpsppgzjacq.jpg&hash=1219936aacacde5ec1e557e814af72777edf76de)
Some jump post to avoid any announces
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150813_182136_zpskwoebhh4.jpg&hash=0156ab89b95966ab28063c61b2405241d230f2f3)
Joey loves watching people work.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150816_160330_zpsl2dh03qf.jpg&hash=7469b5863892a417a9ff00e138808f40d596bf5c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150816_160332_zpsp4kz7utg.jpg&hash=1d43238e79c34052e69f8919da903252c9fc821a)
Pulled the intake manifold to remove all the old wiring and check things out.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150816_184757_zpsg1ntgoir.jpg&hash=762dd2f19bc5129629590f026985173dcccce1e1)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150816_184805_zpspnrex531.jpg&hash=9173a7131b458f3eacacbd6d00c1a23f520c6a05)
Found that the thermostat housing had broke into a few parts..... one of the last original parts still left......
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150818_175241_zpsiexozios.jpg&hash=aa7b220c9a20ba4a6c0027168e0564bbebbfadb1)
120 shot ready to do work!!!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150818_181225_zpsvuypvdor.jpg&hash=1036b9df81ce6536d5265487ca7fa7301bb33b19)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150818_181232_zpshzuet3f0.jpg&hash=531996c33c6318f1a065056f5de30564f3f1a413)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150818_181235_zpsyggcymmv.jpg&hash=f060dc666e5163152557f7abf14000dd1925faa8)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150822_180322_zps4ir1uguo.jpg&hash=f2f267421958930eac84e70780f24777885c0046)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150822_180331_zpsahh9jyi0.jpg&hash=f0f366e154b8424a1c50b6246e74881ec02a7bf0)
Clutch bushings were shot so some brass replacements. I can say the clutch has never been this smooth before!
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150822_181958_zps6yygp0so.jpg&hash=1c5600c3c9d7071a4d1a6d721f49f88ed29bad92)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150909_181416_zpsmbkzxomp.jpg&hash=40733b6250e8eab345082c748b661d96b128c9b6)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150909_182617_zpshadupaki.jpg&hash=3451599902eeb4430fc1578a911057f5838b87b7)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150909_190638_zpszphzmny7.jpg&hash=d6004e8630ce97abde56caab2a7ea184be2d52b2)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150910_193456_zpsexoqxgll.jpg&hash=134a65ba8205d3a26a9a43cc8bda1c6a9ce96ed5)
Dash back in after all the wiring changes.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150910_202704_zpsfj1higap.jpg&hash=d0714b179ac1d8152bc201297228ed8818419027)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150911_200756_zpsrbqkqo7b.jpg&hash=ec7f7515b6fa8cb6c083271b5ed5787652e4fe23)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150912_151020_zpswcges8zz.jpg&hash=3137d19ff65acf3311f07b1c81b0abee2ef98fd0)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150912_180644_zpsyug1utz2.jpg&hash=76c428524a4645ccf56a55bd09b54fb52b535c26)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150915_184203_zpsodcozusa.jpg&hash=b7fa0a45f4a7b2640253efc563f8c4423da568b1)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150915_184214_zps7wx2ytrw.jpg&hash=dc0d7d7cf270ac0a2873bb3d7ca26b01bc2b2875)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150915_185021_zps8k4twjfn.jpg&hash=b24d74a72f024d00422f125fa3c2105ca409f760)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150916_182913_zpsmkpx5k34.jpg&hash=54a2325c8cd8c232df8421f3c47f8b2591d6eff0)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20150924_200913_zpsv9ihtd4q.jpg&hash=0ecadd44064682e649ff35691c929b7824bf07fd)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20151005_174420_zpsdrlrlhkk.jpg&hash=38d7e0e8af0057f934ea11a003134630b1f63436)
Con rod tow hook
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20151005_174955_zpsclxcen8p.jpg&hash=7563da34e22717fc0a98b5800c26597363ff4734)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi971.photobucket.com%2Falbums%2Fae195%2Fcrxvtec91%2FProject%2520Phoenix%2F20151005_175025_zpsz4mr1zfc.jpg&hash=ced07da71e15147490b37504579a78245b2467bd)
Thats it for now, looking to hit the track soon!
-
lots of good stuff there. i a couple things i had done to my crx going on. was going to say it really looks like shit, but getting the front bumper back on is a big improvement.
-
lots of good stuff there. i a couple things i had done to my crx going on. was going to say it really looks like shit, but getting the front bumper back on is a big improvement.
It's been 5+ years it hasn't had both bumpers on or a cat back haha
-
https://youtu.be/cA1iYT0PLJg