:::RHMT::: Real Home Made Turbo

General Category => General Discussion => Topic started by: bluerex on March 28, 2009, 05:21:42 PM

Title: Is this going to hold?
Post by: bluerex on March 28, 2009, 05:21:42 PM

So I decide 4 non running cars in my back yard is too many.  I start wrenching on this XR4Ti and there was no reason it shouldn't fire up, so I check compression. Zeros across the board  >:(  Gasket is wrecked and it's kind of hard to tell from the pic, but that's a good amount of material missing from the head.  Deck looks like shit but is flat. 

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi155.photobucket.com%2Falbums%2Fs311%2Fjewjesus%2FIMG_0102.jpg&hash=46ee8909e1f73048bbab5e3a53f242afa426502e)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi155.photobucket.com%2Falbums%2Fs311%2Fjewjesus%2FIMG_0103.jpg&hash=41a5e4026843c19806219569f8faf2b3ae1b8da3)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi155.photobucket.com%2Falbums%2Fs311%2Fjewjesus%2FIMG_0105.jpg&hash=39ff1fe94a768070052640bd23160a68ced23b9e)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi155.photobucket.com%2Falbums%2Fs311%2Fjewjesus%2FIMG_0107.jpg&hash=c56d4554dee82eddda2e9c81f5bd2025445da267)

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi155.photobucket.com%2Falbums%2Fs311%2Fjewjesus%2FIMG_0109.jpg&hash=02d0213bded36a0691b3649aa96fc0dd92757e9e)

 ???

edit: I didn't use that head.

Title: Re: Is this going to hold?
Post by: Conceptz-X on March 28, 2009, 05:30:05 PM

If it ate the head up, the deck is fucked 

Customer of mine did the same shit

Title: Re: Is this going to hold?
Post by: bluerex on March 28, 2009, 05:33:20 PM

Well we're going to try it at least.  8* base timing and no more than 10 psi. 

Title: Re: Is this going to hold?
Post by: Conceptz-X on March 28, 2009, 05:40:47 PM

good luck!