:::RHMT::: Real Home Made Turbo

General Category => Engine Management => Topic started by: fuse on January 28, 2010, 11:36:28 PM

Title: Iat code on deceleration.
Post by: fuse on January 28, 2010, 11:36:28 PM

I tuned this car about 6 mouths ago no problems worked good used crome. It is a h22 running 9 pounds I don’t know what turbo probably a chin turbo dsm 450s. Now when he decelerates from about 60 to 55 all the way of the gas I get a iat code. Popped a new sensor no fix ohm tested the signal and the ground wire 0 ohms on both neither are shorted to ground......= stumped.

Anyone run into this I don’t just want to go gay and delete the code?

Title: Re: Iat code on deceleration.
Post by: chris on January 28, 2010, 11:41:45 PM

You have the right plug?

Title: Re: Iat code on deceleration.
Post by: fuse on January 29, 2010, 11:47:12 PM

Yep...... How hard is it to become a neptune or ectune dealer? My town already has one of each but not in the same zip as me and I don’t own a shop but do have dyno hookups.