:::RHMT::: Real Home Made Turbo

General Category => Hybrid/Tech => Topic started by: jdmhatchracer94 on February 04, 2010, 02:00:21 AM

Title: civc springs
Post by: jdmhatchracer94 on February 04, 2010, 02:00:21 AM

Anyone  have set layin around they could measure for me? Lookin for spring height and i.d.. I found 600lb springs for cheap but the only have 12" and 10" springs with 2 1/4" inside dia wondering if they will fit my eg? I think the rear stockers are 11" can any one assist me?

Title: Re: civc springs
Post by: 88dx on February 04, 2010, 02:02:51 AM

I have a set of stockers off a 94 teg do you know if they are the same?

Title: Re: civc springs
Post by: jdmhatchracer94 on February 04, 2010, 02:06:19 AM

that is actualy what i have on my car ass 97 gsr shocks and springs and yes i think the height is the same

Title: Re: civc springs
Post by: 88dx on February 04, 2010, 02:09:51 AM

they are 14-1/2"x2-1/4" ish :P

Title: Re: civc springs
Post by: 88dx on February 04, 2010, 02:11:13 AM

got a link to the springs ur buying?

Title: Re: civc springs
Post by: crttaz on February 04, 2010, 02:59:25 AM

7-8" are all that is needed.......

Title: Re: civc springs
Post by: 88dx on February 04, 2010, 03:04:03 AM

Quote from: crttaz on February 04, 2010, 02:59:25 AM

7-8" are all that is needed.......

how low is the ride height?

Title: Re: civc springs
Post by: crttaz on February 04, 2010, 03:08:27 AM

depends on where you set the sleeves at.

Title: Re: civc springs
Post by: jdmhatchracer94 on February 04, 2010, 11:56:05 AM

thats what i needed then the 12 will work. i am tryin to find a direct link to them I mean shit for $37.88 each might as well try them. Shit just looked again the 600lbs are 2.5" i.d.


http://www.summitracing.com/parts/HAL-12-600/ (http://www.summitracing.com/parts/HAL-12-600/)