:::RHMT::: Real Home Made Turbo
General Category => Hybrid/Tech => Topic started by: ratcityrex on February 10, 2010, 10:55:23 AM
-
I need a new distributer bearing for my b18b. Ive looked and cant find a part number anywhere. I want to just go down to my local napa and say here it is, give it to me. Let me know if you guys find a part number for me.
-
God you're a useless lazy fuck. Acura distributor bearing is Koyo # 6001Z or Lordco # 0782401
-
Thanks nog. And yes, im a lazy fuck. I did search but all i came up with was ones for accords.
-
God you're a useless lazy fuck. Acura distributor bearing is Koyo # 6001Z or Lordco # 0782401
Since your in spoon feeding mode, what's the P# for a d-seires?
-
The replacement bearing part for Civics (88-91 JDM Civic SiR, USDM 88 and up), USMD Accords (90 and up), and USDM Legends (88-90) is a Nachi Bearing. The part number is 6001NSL.
-
what about the seals????
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fwww.britannica.com%2Fblogs%2Fwp-content%2Fuploads%2F2008%2F03%2Fseals.jpg&hash=22bd36354647e69a5b7a5435b8f780053131f5df)
-
Void if seal is broken.
-
http://www.partstrain.com/store/details/Honda/Prelude/NOK/Distributor_Seal/1994/VTEC/4_Cyl_2-dot-2L/W0133-1640599.html (http://www.partstrain.com/store/details/Honda/Prelude/NOK/Distributor_Seal/1994/VTEC/4_Cyl_2-dot-2L/W0133-1640599.html)
Might work on all dizzys
-
0782401 is the right part. Napa sells it for $6.39 the bearing size is 28mm OD 12mm ID, and 8mm thick. Its a koyo 6001rs bearing, but it is listed under a diff manfact. Its just a relabled koyo bearing. To bad i couldent get the tooth wheels off. They are pressed on and i just said fuck it after almost an hour of trying to nigger rig sometning to pull them off. They are not keyed on the shaft so im pretty sure that i would never be able to get them repressed back on in the same exact location and my car would run like shit, or not run at all. So i ordered a new dizzy from www.acuraoemparts.com (http://) for $100 shipped. I dont even realy want to fuck around with nigger rigging something an obd2 dizzy with a jumper and all that. I just want the right parts.
-
100 BUCKS FOR A NEW oem DIST? 99.9999999999999% sure you ordered the wrong thing. Even the cdm ones are more than that
-
Well it dosent come with a ignighter, coil, cap, or roter.
-
You have a link? still sounds oddly cheap
-
May be new, but probably not OEM Honda
New dizzys go for less than $100 on eBay, just not new OEM Honda
z6 dizzy
http://cgi.ebay.com/ebaymotors/Distributor-92-95-HONDA-CIVIC-VTEC-TD-42U-TD42U-DEL-SOL_W0QQitemZ220551165512QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item3359dfb648 (http://cgi.ebay.com/ebaymotors/Distributor-92-95-HONDA-CIVIC-VTEC-TD-42U-TD42U-DEL-SOL_W0QQitemZ220551165512QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item3359dfb648)
-
http://www.acuraoemparts.com/delray/jsp/prddisplay.jsp?inputstate=5&catcgry1=INTEGRA&catcgry2=1993&catcgry3=3DR+LS&catcgry4=KA5MT&catcgry5=DISTRIBUTOR%2B%28TEC%29%2B%282%29&ListAll=All&vinsrch=no (http://www.acuraoemparts.com/delray/jsp/prddisplay.jsp?inputstate=5&catcgry1=INTEGRA&catcgry2=1993&catcgry3=3DR+LS&catcgry4=KA5MT&catcgry5=DISTRIBUTOR%2B%28TEC%29%2B%282%29&ListAll=All&vinsrch=no)
#4 is what I ordered. Shit I hope its right. :-\
-
fuckin cheap
-
Dealz!!
-
No coil, igniter, or heat sink, hopefully yours are still good
-
Mine work just fine. I just need a bearing. Most expensive bearing ive bought for this car =(