:::RHMT::: Real Home Made Turbo
General Category => General Discussion => Topic started by: jay on February 14, 2010, 05:54:27 PM
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi47.tinypic.com%2Frawarm.jpg&hash=3e4842c0608942bcfed007ace9890001811a4c34)
both of the fucking nipples fucking spin in place and just leak atf out
so i looped the line back into the trans so it just recirculates the fluid bypassing the tranny fluid cooler
wtf do i do to make this bitch not leak
on my other rad they dont spin
-
my kid is 11 months old and my wife still has leaky nipples.. it's common.
-
well if nothing is connected to it, all teh shit thats in there is gonna drip out. once it all drips out, it will stop dripping....
-
drive it a while with the cooler bypassed and you won't be worried about that small leak for a while.
-
Buk just throw an aftermarket tranny cooler in it and call it a day.
-
Buk just throw an aftermarket tranny cooler in it and call it a day.
-
Leaky nipples........lol
-
well if nothing is connected to it, all teh shit thats in there is gonna drip out. once it all drips out, it will stop dripping....
lol i had the lines connected and they were leaking thats why i disconnected it..
the nipple just spins
-
shit sucks ill just leave it bypassed till i can afford a atf cooler im not even driving the car anyways i just need to limp the bitch home
-
ever heard of jbweld
-
ever heard of jbweld
good call but i dont think it will hold up
-
ever heard of jbweld
good call but i dont think it will hold up
jb weld fixes everything
-
ever heard of jbweld
good call but i dont think it will hold up
jb weld fixes everything
Plus five internets to those that believe in JB Weld.
-
if it holds radiators it will hold a shitty stock atf cooler, just clean it
-
Buk, I'll ship you a cooler if you want to pick up the tab on shipping. :noel:
-
I fixed a cracked transmission case with jb with fluid still in it. Clean it. Advanced has generic coolers on the shelf.
-
I fixed a cracked transmission case with jb with fluid still in it. Clean it. Advanced has generic coolers on the shelf.
fuck that, go raid the nigger neighbors air-conditioner unit and steal one of the little heat exchangers
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fmemegenerator.net%2FInstances%2F454%2FDepression-Dog-Steal-neighbors-evaporator-huff-the-freon-first.jpg&hash=acf7b6edbae352afb5695658b113e9833f174b29)
-
JB weld can do anything, I once built intercooler end tanks out of jb weld and scrap pieces of plastic, i also once made a 2.5in to 2 in coupler reducer out of jb weld.
-
jb weld held jesus to the cross
-
cut the nipple off, run some hose from the line to the cooler. voila.
+1 for JB weld though, can't go wrong
-
Swap out tranny for a manual, problem solved.