:::RHMT::: Real Home Made Turbo

General Category => Forced Induction => Topic started by: Emperor on February 18, 2010, 03:44:37 PM

Title: WOW thats ghetto
Post by: Emperor on February 18, 2010, 03:44:37 PM
http://www.rufusthedoofus.com/no-pressure-yet/ (http://www.rufusthedoofus.com/no-pressure-yet/)

i wonder how good this flow^^
Title: Re: WOW thats ghetto
Post by: Robb on February 18, 2010, 03:49:30 PM
Your a tard.  That manifold is more than what is needed to boost that DIESEL 6 cylinder.  Flow?  You have no clue what your talking about.

My concern is that his CDM turbo is too small.
Title: Re: WOW thats ghetto
Post by: marcj on February 18, 2010, 03:59:07 PM
ghetto?  that's a quality manifold, sir.. needs more holset
Title: Re: WOW thats ghetto
Post by: Emperor on February 18, 2010, 04:00:29 PM
LOL i guess

Tard is like saying Hello in RHMT^^

Title: Re: WOW thats ghetto
Post by: bigwig on February 18, 2010, 04:33:47 PM
You better bring weaker shit than that if you want to criticize someone for building something themselves.  As far as I can see, they used decent materials, they built it fairly well, and it was welded fairly well.  Is the design optimized?  No.  Would it probably be better with round tube vs square?  Probably.  Either way, it's a log manifold, and flow means dick, so I give the guy a B+.
Title: Re: WOW thats ghetto
Post by: SloS13 on February 18, 2010, 04:34:43 PM
Wednesday, you.
Title: Re: WOW thats ghetto
Post by: Budget_SI on February 18, 2010, 04:38:46 PM
badass squarefold!  8)
Title: Re: WOW thats ghetto
Post by: brine04 on February 18, 2010, 05:36:54 PM
You've obviously never seen an oem 6bt manifold. It's half that size.
Title: Re: WOW thats ghetto
Post by: 900s on February 18, 2010, 07:18:34 PM
badass squarefold!  8)

This. Mild steel and fluxcore would make it better though.
Title: Re: WOW thats ghetto
Post by: Whitey on February 18, 2010, 07:28:26 PM
Nothing ghetto about that.


Go fuck yourself
Title: Re: WOW thats ghetto
Post by: glustic on February 18, 2010, 07:46:13 PM
Get the fuck out of here. If you think that's ghetto you would be blown away by the shitn we pull off. But may I say your mothers snatch is quite fine
Title: Re: WOW thats ghetto
Post by: 7808 on February 19, 2010, 07:49:25 PM
that manifold is mad decent.   you obviously have not spent much time here (and probly shouldnt) or you would never question somthing like that. 

ive used square tube on manifolds on cars that would tow yours while beating it in a race with an identical car to yours
Title: Re: WOW thats ghetto
Post by: t_cel_t on February 19, 2010, 08:22:29 PM
fucking awesome
like its been, said have you ever even seen the stock mani on some of these motors?
Title: Re: WOW thats ghetto
Post by: SgtB on February 19, 2010, 09:07:48 PM
Laser cut and decent welds with no rust. Where's the ghetto?
Title: Re: WOW thats ghetto
Post by: onlyflash944 on February 19, 2010, 10:18:25 PM
Laser cut and decent welds with no rust. Where's the ghetto?


haha, yea sch40 threaded pipe manifold is starting to rust a bit
Title: Re: WOW thats ghetto
Post by: TTC on February 19, 2010, 10:26:13 PM
Squarefold manis go waaay back.



(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi48.photobucket.com%2Falbums%2Ff244%2Fshowvic%2FPicture027-1.jpg&hash=a04febaecb74463190f94894d3b870a40bd6ba94)
Title: Re: WOW thats ghetto
Post by: j.h.christ on February 19, 2010, 11:02:44 PM
that thing is going to be able to tow a house
Title: Re: WOW thats ghetto
Post by: turbob16hatch on February 19, 2010, 11:13:27 PM
eh, using tubes larger then the port on the flange then cutting a hole the size of the port in the "log" section, is begging for failure.

But that is bad rhmt.  :noel:
Title: Re: WOW thats ghetto
Post by: SgtB on February 19, 2010, 11:36:06 PM
Didn't notice that.  :-\
Title: Re: WOW thats ghetto
Post by: Pootie on February 19, 2010, 11:49:33 PM
that manifold is pimppppp!!
Title: Re: WOW thats ghetto
Post by: d112crzy on February 19, 2010, 11:50:39 PM
Wednesday, you.
Title: Re: WOW thats ghetto
Post by: Corey on February 20, 2010, 03:00:32 AM
eh, using tubes larger then the port on the flange then cutting a hole the size of the port in the "log" section, is begging for failure.

But that is bad rhmt.  :noel:

im wondering why he didnt get some stainless round pipe. would have been just as easy and worked twice as well.
Title: Re: WOW thats ghetto
Post by: HiProfile on February 21, 2010, 03:57:06 PM
Squarefold manis go waaay back.


That's what I thouht of when I saw this. That shit was tits.
Title: Re: WOW thats ghetto
Post by: Jorsher on February 21, 2010, 09:20:38 PM
lol, he didn't like whoever-posted-from-rhmt's opinion :P
Title: Re: WOW thats ghetto
Post by: turbob16hatch on February 21, 2010, 09:50:51 PM
Thats because he thinks he built something correctly. WRONG..... :?:

Is it me or did i never hear the turbo make any noise when he was reving it up.
Title: Re: WOW thats ghetto
Post by: colt45 on February 22, 2010, 02:47:40 AM
constant pressure is good
Title: Re: WOW thats ghetto
Post by: skaterdudz02 on March 05, 2010, 09:25:13 PM
I think he needs three turbos on there to actually get that thing moving.
Title: Re: WOW thats ghetto
Post by: 2slow on March 06, 2010, 06:09:56 AM
I think he needs three turbos on there to actually get that thing moving.
and i think you are a homo.