:::RHMT::: Real Home Made Turbo
General Category => Hybrid/Tech => Topic started by: Cooljnateman on February 23, 2010, 01:12:13 AM
-
sorry im to lazy to search and Honda-tech is gay.... plug google keeps giving me different answers
im thinkin its around 220-230 whp safely on 10lbs
BUT what can the d16y8 safely hold for power, is it around 220-230 whp? if its higher thats great if its lower FUCK IT im going with an LS
-
250 whp max
y8 = oil starvation issues...
-
what u mean oil starvation issues... explain in brief?
-
Y8 oil pumps have low volume. Usually mains/rod bearing on #4 will have issues with high mileage.
Just boost it. Glustic has his boosted totally stock and its fine.
-
yah it does kinda hav high mileage...cant i just get a better pump?.....i do want to boost an ls in the ej8 though but it would b more money and work to swap it and find a healthy motor....idk i need to think...im just gathering ideas for now wana do this shit right
-
Boost what you got now and build a d16 on the side.
-
the main issue with the Y series blocks is the crank has half the oiling holes for the bearings.
anyways, boost the motor and stop being a pussy.
or go get an LS and boost that.
-
haha to this...the pussy part....i am being one arnt i lmao...yah ill boost it fuck it.....
the main issue with the Y series blocks is the crank has half the oiling holes for the bearings.
anyways, boost the motor and stop being a pussy.
or go get an LS and boost that.
Boost what you got now and build a d16 on the side.
but i like this idea!
-
i had my old y8 boosted on 10psi for over 2 years and i never had a problem. but it was tuned and i didnt beat on it all that much. pretty much all comes down to proper maintanance and doing it right. just boost it and build something on the side or save up for your LS.
-
I have replaced way too many y series blocks with spun bearings. I have 3 in my shop alone right now.
Enjoy what you have and source a nice clean d16z6 block and do a vitara build when cash is in hand.
-
I have replaced way too many y series blocks with spun bearings. I have 3 in my shop alone right now.
Enjoy what you have and source a nice clean d16z6 block and do a vitara build when cash is in hand.
Sighs thats why I wish I couldn't hear so good. I can hear the tell tale sounds of bottom end bearigs starting to go in my y8 block........I have vitara's and rods ready to go and a free a6 block to put them in. It's just that well I'm really lazy and 2 hours and 70 bucks worth of sealed power bearings is easier then building a motor and then swapping it in.
Ive don this twice. damn maybe when it warms up.
-
The first one I replaced was back in around 2003. Stock car, rod knock at around 140k
-
hmm..... not i really start to wonder...shit i think im going LS when i save up and ill enjoy my d16y8 the way it is for now, make the car look real clean then boost it
-
hmm..... not i really start to wonder...shit i think im going LS when i save up and ill enjoy my d16y8 the way it is for now, make the car look real clean then boost it
with low cost of vitara's and modern tuning abilities B series makes absolutely no sense to build anymore. theyre obsolete if a 20 year old honda can get anymore obsolete then they already are.
-
yah but the TQ numbers of an LS on low boost r FAR more incredible then low boost on any d series....
-
yah but the TQ numbers of an LS on low boost r FAR more incredible then low boost on any d series....
and f22 torque owns an ls. Lots
-
fuck an ls. all you find now a days is LS's with super high mileage and pushing oil thru valve seals and rings. source a b20 and be all good.
-
not if i find a bare block ls and build it....
-
Just stop thinking and boost the fucker. I did a comp test and boosted my shit at 169000. If you take care of your car and get it tuned you will be fine. If you do blow it a b20 can be had for dirty cheap.
-
not if i find a bare block ls and build it....
built on hopes and dreams?
-
its lookin like this.....rock what i got.....get a d series on the side build that shit! and then when its done throw it in and go for 20lbs or higher!
-
good luck u see how mine worked out for me
-
no why what happen with yours...im not plannin on going egay on it...and im buildin it?
-
What you need is some oczc rods!!!!