:::RHMT::: Real Home Made Turbo

General Category => General Discussion => Topic started by: 88dx on February 28, 2010, 02:07:15 AM

Title: Any option other then Digi-Key?
Post by: 88dx on February 28, 2010, 02:07:15 AM

Digi key is showing the freescale map sensor being back Ordered untill April  >:(. Is their anyother place to get them for cheap?

Title: Re: Any option other then Digi-Key?
Post by: jagojon3 on February 28, 2010, 02:08:26 AM

I miss the days of getting free samples from them... pissed xenocron the fuck off and he personally ratted everyone out to stop the samples being available.

Title: Re: Any option other then Digi-Key?
Post by: stealthiskey on February 28, 2010, 02:11:52 AM

newark electronics?  or go direct to mfr?

Title: Re: Any option other then Digi-Key?
Post by: Minor Threat on February 28, 2010, 02:17:36 AM

mouser?

Title: Re: Any option other then Digi-Key?
Post by: 88dx on February 28, 2010, 02:21:16 AM

Quote from: jagojon3 on February 28, 2010, 02:08:26 AM

I miss the days of getting free samples from them... pissed xenocron the fuck off and he personally ratted everyone out to stop the samples being available.

Xeno always fucks up a good thing  >:(

Title: Re: Any option other then Digi-Key?
Post by: 88dx on February 28, 2010, 02:21:56 AM

Quote from: Minor Threat on February 28, 2010, 02:17:36 AM

mouser?

they are spendy and idk if the sensors they sell will work?

Title: Re: Any option other then Digi-Key?
Post by: bigwig on February 28, 2010, 02:25:58 AM

2.5 bar: http://search.digikey.com/scripts/DkSearch/dksus.dll?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=MPX4250AP-ND&x=0&y=0 (http://search.digikey.com/scripts/DkSearch/dksus.dll?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=MPX4250AP-ND&x=0&y=0)

4.0 bar: http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=MPXH6400AC6U-ND (http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=MPXH6400AC6U-ND)

WTF are you talking about?  There are plenty available.

Title: Re: Any option other then Digi-Key?
Post by: 88dx on February 28, 2010, 02:28:33 AM

Quote from: bigwig on February 28, 2010, 02:25:58 AM

http://search.digikey.com/scripts/DkSearch/dksus.dll?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=MPX4250AP-ND&x=0&y=0 (http://search.digikey.com/scripts/DkSearch/dksus.dll?lang=en&site=US&WT.z_homepage_link=hp_go_button&KeyWords=MPX4250AP-ND&x=0&y=0)

WTF are you talking about?  There are plenty available.

do those ones work?

this is the sensor I have bought in the past

http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=MPXH6300AC6U-ND (http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=MPXH6300AC6U-ND)

Title: Re: Any option other then Digi-Key?
Post by: bigwig on February 28, 2010, 02:32:59 AM

How much pressure are you going to run?

If it's less than 1.5 bar, get the 2.5 bar sensor.  It's SO much easier to mount.  You can't hide it in the stock map sensor, but it's what I would use since it's stupid easy to install.

If you want a 3.0 bar, yes they are out, but for no additional cost you can get a 4.0bar sensor: http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=MPXH6400AC6U-ND (http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=MPXH6400AC6U-ND) and it's the same thing as the 3 bar except good for more pressure.

If you really want the 3.0bar, http://mouser.com/ProductDetail/Freescale-Semiconductor/MPXH6300AC6U/?qs=sGAEpiMZZMvhQj7WZhFIALpLlyV3lh9LgZdi3njH%252bJU%3d (http://mouser.com/ProductDetail/Freescale-Semiconductor/MPXH6300AC6U/?qs=sGAEpiMZZMvhQj7WZhFIALpLlyV3lh9LgZdi3njH%252bJU%3d)

Mouser>Digikey 99% of the time IMO

Title: Re: Any option other then Digi-Key?
Post by: 88dx on February 28, 2010, 02:36:41 AM

ur link is to a 5bar

Title: Re: Any option other then Digi-Key?
Post by: bigwig on February 28, 2010, 02:37:30 AM

Quote from: 88dx on February 28, 2010, 02:36:41 AM

ur link is to a 5bar

Is not.

58 pounds per square inch = 3.99895923 bar

http://www.realhomemadeturbo.com/forum/index.php?topic=649.msg10830#msg10830 (http://www.realhomemadeturbo.com/forum/index.php?topic=649.msg10830#msg10830)

Title: Re: Any option other then Digi-Key?
Post by: 88dx on February 28, 2010, 02:52:03 AM

Quote from: bigwig on February 28, 2010, 02:37:30 AM

Quote from: 88dx on February 28, 2010, 02:36:41 AM

ur link is to a 5bar

Is not.

58 pounds per square inch = 3.99895923 bar

http://www.realhomemadeturbo.com/forum/index.php?topic=649.msg10830#msg10830 (http://www.realhomemadeturbo.com/forum/index.php?topic=649.msg10830#msg10830)

Atmospheric pressure + 4bar=5 Bar right?

Title: Re: Any option other then Digi-Key?
Post by: BangBusMaster on February 28, 2010, 03:18:40 AM

Buy the fatty from Mouser. Set boost to  O0 . Do big smokey burnouts. Win.

Title: Re: Any option other then Digi-Key?
Post by: 88dx on February 28, 2010, 03:34:58 AM

Quote from: BangBusMaster on February 28, 2010, 03:18:40 AM

Buy the fatty from Mouser. Set boost to  O0 . Do big smokey burnouts. Win.

thats the plan and to see how many sets of pistons I melt on Pump gas  :?:

Title: Re: Any option other then Digi-Key?
Post by: Tim on February 28, 2010, 08:14:55 AM

Quote from: 88dx on February 28, 2010, 02:52:03 AM

Quote from: bigwig on February 28, 2010, 02:37:30 AM

Quote from: 88dx on February 28, 2010, 02:36:41 AM

ur link is to a 5bar

Is not.

58 pounds per square inch = 3.99895923 bar

http://www.realhomemadeturbo.com/forum/index.php?topic=649.msg10830#msg10830 (http://www.realhomemadeturbo.com/forum/index.php?topic=649.msg10830#msg10830)

Atmospheric pressure + 4bar=5 Bar right?

No. Its an absolute sensor so roughly the first bar is atmospheric.