:::RHMT::: Real Home Made Turbo
General Category => Fabrication => Topic started by: 2slow on March 04, 2010, 01:27:14 AM
-
i kknow its ugly as shit but oh well the welder only cost 60 with rods,mask,gloves,hammer, and brush (https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi257.photobucket.com%2Falbums%2Fhh240%2FTW1NTURB03KGT%2F0222102043.jpg&hash=6eb82f2f4aaa0f41d8b068bff870bd4c73d2bbf7)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi257.photobucket.com%2Falbums%2Fhh240%2FTW1NTURB03KGT%2F0222102020.jpg&hash=270bcb2b475d00063f4ba6e247f978b4fb6425df) this is a 70 amp arc welder from campell hausfield with hf quick strike rods. i was just practicing and made this shit
-
Looks better the Buk's so far.
-
what rods are you using? 6010, 6011 7018 or what.
i its a 60xx rod run it down hill. if its 3/32 which im assuming it is max the machine out and run it downhill.
if your welding with 7018 then u wan to run it uphill. u will not get shit for results running the rods in the wrong direction.
-
what rods are you using? 6010, 6011 7018 or what.
i its a 60xx rod run it down hill. if its 3/32 which im assuming it is max the machine out and run it downhill.
if your welding with 7018 then u wan to run it uphill. u will not get shit for results running the rods in the wrong direction.
I run 6010 uphill all day, in fact you can get run off a job for going downhill with it...unless of course it's a pipeline.
-
i root pipe uphill
i weld casings downhill.
the shit hes welding run it down.
-
For what he's welding, I'd get some 7018 and go to town. Much easier to run than 60** for noobs
-
6013 is my rod of choice for newbs. especially ones that burn lots of holes
-
Looks better the Buk's so far.
i was just gonna say that
HAHAHAHA
-
these rods are hf quickstrike 6011s 3/32. i bought some hobart 6011 3/32 that just plain suck ass. this pipe that i welded on is just some autozone piping i imagine its just standard galvanized steel so i bought a generic rod for it
-
standard galvanized steel
Take a big huff of the smoke off that :yes: No, actually dont. That shit will get you all kinds of fucked up and sick. DONT WELD GALVI
-
standard galvanized steel
Take a big huff of the smoke off that :yes: No, actually dont. That shit will get you all kinds of fucked up and sick. DONT WELD GALVI
welding it is fine, just dont' breathe the smoke. if you do, and get sick, the guys at the cement plant said that milk makes it better. dont' know about that one though
-
well fuck im lactose intolerant so im all sorts of fucked
-
well fuck im lactose intolerant so im all sorts of fucked
just don't berathe galvanized welding smoke
-
well fuck im lactose intolerant so im all sorts of fucked
just don't berathe galvanized welding smoke
yeah thats the plan. i was trying my hand at making an exhaust cut out but then i said fuck it and realized i needed more practice
-
where the fuck are you guys finding welders for $60? Yes, i see this one says its from walmart. Walmarts near me have a cheap fluxcore for $150. Cheapest I can go is $109 for one from HF brand new. Although I could try asking about returns they haven't restocked yet. A bunch of people around here buy then return from there.
-
it's a stick welder not a fluxcore welder
That's explain it.
-
i bought it on ebay for 60 shipped like a years ago and barely ever use it. once i figure out some shit with me civic then ill use for the turbo shit going on it