:::RHMT::: Real Home Made Turbo
General Category => Hybrid/Tech => Topic started by: t_cel_t on March 10, 2010, 08:05:35 PM
-
if i stick with everything b7 and use a y8 2 layer HG and vitaras, im i really going to get 6.6:1 :?:
using this, http://www.zealautowerks.com/dseries.html (http://www.zealautowerks.com/dseries.html)
-
thats whats going to happen when the piston sits that far down in the cyl at TDC.
-
if i stick with everything b7 and use a y8 2 layer HG and vitaras, im i really going to get 6.6:1 :?:
using this, http://www.zealautowerks.com/dseries.html (http://www.zealautowerks.com/dseries.html)
Try 75.5 o/s vitara, y8 head, stock y8 hg, and deck the block 0.080", you will get 8.0:1 comp.
-
how about all b7 head/block/rods and y8 gasket and p2p pistons(y8) = 7.99 i think we have a winner or pm6=8.51
-
Any reason why you dont want to run a 1.6 block or jdm d15b vtec block?
-
because i got 3 good d15 blocks and heads, everyone wants 1000 for a z6 and im feening for boost
-
$1000 for a z6 block :o you fucking joking?
-
because i got 3 good d15 blocks and heads, everyone wants 1000 for a z6 and im feening for boost
I get those for $0.00 to $150 all day. ;D
Most of the ricers (in my area) believe in only twin cam b-series and h-series and trash all their d-series. :?:
-
that and honda stuff isnt too common around here, right now there is 1 d16y8 on craigslist and its about 1.5 hours away and they're spicks and its 400, fuck that
-
I sold my D16A6 for $25 today. 8)
-
run VX rods, pistons will be .018" above deck.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi107.photobucket.com%2Falbums%2Fm307%2Fbonespec%2FHonda%2Fb7vitara-1.jpg&hash=40ac8131f15946b7ea14de5b8ba3647a967c3bad)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi107.photobucket.com%2Falbums%2Fm307%2Fbonespec%2FHonda%2Fb7vitara-2.jpg&hash=fe181e907ad1df35cb700af36d51259a9fa398f5)
-
I sold my D16A6 for $25 today. 8)
son of a bitch
-
or get the forged d15b2/7 vitara rods from the dude in hungary.
-
or get the forged d15b2/7 vitara rods from the dude in hungary.
fuck it, im going p2p and y8 gasket. hopefully 10 pounds dont turn me out.
-
For some reason I thought u lived near wisconsin, I have some junk you may want if so. :evil:
-
i do live in wisconsin, madison in fact
-
or get the forged d15b2/7 vitara rods from the dude in hungary.
?
-
im doing this on the mad cheapnes, this will hold me over untill i find a d16
-
im doing this on the mad cheapnes, this will hold me over untill i find a d16
I just sold an A6 block for $25.
-
i fucking know bastard
-
Oops, didnt mean to rub that in.
Was drunk most of that day and didnt realize I already posted.
Either way, you should have fun with the d15.
-
This is a lot of trouble to go through for a combo that's good for a lot less power than a stock 1.6
-
This is a lot of trouble to go through for a combo that's good for a lot less power than a stock 1.6
True, but when the D16 supply runs dry????
-
This is a lot of trouble to go through for a combo that's good for a lot less power than a stock 1.6
True, but when the D16 supply runs dry????
K-series!
-
Bingo
-
This is a lot of trouble to go through for a combo that's good for a lot less power than a stock 1.6
True, but when the D16 supply runs dry????
K-series!
SOHC K series?????
Didn't think so.
Two many cams :)
-
If you lock the VTC and run an OBD1 distributor... ah, now there's a classic.
-
1.6's run out that will not happen. Most are just a little tired and being swapped out for jdm d15b vtec's
-
They are getting hard to find on the east coast, spearhead of the FAKLAD movement.
-
well how much power are the rods going to hold?
-
i think my brother in law might be interested in selling his high compression forged SRP d16a6 pistons, he is going with eagle/vitaras.
PM if your interested and if they will work, and ill get up his ass to get them out.
-
170-180. They fold somewhere before/after 200 or under any amount of detonation.
-
170-180. They fold somewhere before/after 200 or under any amount of detonation.
good enough for me untill i find a d16 block
-
170-180. They fold somewhere before/after 200 or under any amount of detonation.
good enough for me untill i find a d16 block
Cool beans. Just don't waste time, effort, money on putting the Vitaras in there or even rebuilding the engine.
-
i got some cheap p2p pistons that im throwing in there
just did a quick head refresh, clean, lap valves ect, valve stem seals
$30 spent on full engine gasket set, im doing this cheap.
just grabbed a bunch of shit off my brothers civic befor he junked it, next up the sinktrap