:::RHMT::: Real Home Made Turbo
General Category => Hybrid/Tech => Topic started by: malichite on March 29, 2010, 05:34:22 PM
-
Looking at rebuilding my D16 Tranny in the slut. Tired of getting used fucked up trannies and want everything right. Anybody ever buy shit from these guys? Any thoughts on this? Mine current trans works but grinds into 3rd, whines really bad when down shifting blah blah blah. Any thing else I may need?
Also, anybody in the pacNW with some experience want to show a broke nig the ropes on rebuilding a trans?
http://cgi.ebay.com/ebaymotors/Synchrotech-Civic-D16-Bearing-Seal-and-Synchro-KIt_W0QQcmdZViewItemQQhashZitem27a9b70a94QQitemZ170351069844QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ht_500wt_1182 (http://cgi.ebay.com/ebaymotors/Synchrotech-Civic-D16-Bearing-Seal-and-Synchro-KIt_W0QQcmdZViewItemQQhashZitem27a9b70a94QQitemZ170351069844QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ht_500wt_1182)
-
Take pictures while you do it and do a write up 8)
-
Planned on it ;D
-
Looking at rebuilding my D16 Tranny in the slut. Tired of getting used fucked up trannies and want everything right. Anybody ever buy shit from these guys? Any thoughts on this? Mine current trans works but grinds into 3rd, whines really bad when down shifting blah blah blah. Any thing else I may need?
Also, anybody in the pacNW with some experience want to show a broke nig the ropes on rebuilding a trans?
http://cgi.ebay.com/ebaymotors/Synchrotech-Civic-D16-Bearing-Seal-and-Synchro-KIt_W0QQcmdZViewItemQQhashZitem27a9b70a94QQitemZ170351069844QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ht_500wt_1182 (http://cgi.ebay.com/ebaymotors/Synchrotech-Civic-D16-Bearing-Seal-and-Synchro-KIt_W0QQcmdZViewItemQQhashZitem27a9b70a94QQitemZ170351069844QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ht_500wt_1182)
Got their seal kit worked great. All original Honda seals. ;D
-
picked up a 3rd gear kit from them a long while back for a YS1 and it was damn nice :noel:
-
Cool, that was what I was hopping to hear.
-
sure your forks are good too?
-
The one I am rebuilding is Hydro. I have a few spare cables kicking around I can rob parts from. Are they interchangeable?
-
the shift forks? not sure, check the part numbers on majestics site and see if they are the same.
-
I have a good z6 gearset if you want it you can have it, I'm located in Auburn WA.
Input shaft bearing took a shit, you can have everything if you want to change the bearing. FREE
Came out of a del sol with 170k something miles.
-
88-91 shift forks are NLA, aka No Longer Available
3-4 shift forks from 88-91 will NOT interchange with 92-95/
I have ONE customer who I've not heard where I installed a 92-95 1-2 shift fork into a 88-91 CRX Si tranny.
No Gnu's is good Gnu's!
Gary Gnu (http://www.youtube.com/watch?v=mAwVIZDAUF0#)
-
Hondabond. Also powerwash your case and clean up the magnet well before re assembly.
I would also recommend powerwashing the transmission before you even crack the case. Purple power and 5 bucks at the diy car wash should get majority of the nasty stuff off.
-
syncrotech=gearspeed?
-
I have a good z6 gearset if you want it you can have it, I'm located in Auburn WA.
Input shaft bearing took a shit, you can have everything if you want to change the bearing. FREE
Came out of a del sol with 170k something miles.
Shit, I just came through auburn today. I will gladly take it off your hands. I will get with you in PM for directions, contact crap.
Thanks everyone else for the advice. I ordered that setup last week and will report back on it when I am done along with a right up of the rebuild..
-
syncrotech=gearspeed?
stfu snitchnig
-
syncrotech=gearspeed?
STFUS and GTFO
-
buy a couple quarts of penzoil syncromesh for when you're done. they sell it at autozone, and other places I'm sure. shits da bomb yo :mexi:
-
buy a couple quarts of penzoil syncromesh for when you're done. they sell it at autozone, and other places I'm sure. shits da bomb yo :mexi:
Will do. I also have an old case I am getting cleaned up right now before the rest of the stuff shows up. Make it look minty fresh :)
-
FUCK SYNCOR MESHX 10W-30 $ LiFE11
-
Nothin but 10W30 here
-
5w30 synchropiss or 10w30 supertech?????
Wally World for the 10w30!
-
i put the purp in the tranny too. or oem MTF
-
i put the purp in the tranny too. or oem MTF
+1 shifts great, better than just 10w30.
-
i put the purp in the tranny too. or oem MTF
+1 shifts great, better than just 10w30.
SHit grinds ether way for me, But It dosent grind as bad when I put in regular old 10w-30.
-
supertech oil for me
-
This shit is all going to be brand new. Better not be any fucking grinding, even if I just fill it with fucking piss.
-
supertech oil for me
I use that for my engine usually, unless theres a sweet sale on something else. I just read a lot back in the day about how the gm syncromesh shit was supposed to be the best, and the penzoil stuff was the same shit but in a much less expensive bottle. I don't really know if it's any better than good ole 10w30, I just paid the extra couple bucks for piece of mind.
-
Likely all my SCCA trannys will be changing fluid AWAY from Synchromesh.
The test will be at IT Fest in the heat of summer.
-
Likely all my SCCA trannys will be changing fluid AWAY from Synchromesh.
The test will be at IT Fest in the heat of summer.
what will you be switching to?
-
the purp!
-
Never Purple or Red.
Royal Purple is 1/2 Pennzoil Synchromesh and 1/2 RP oil blended.
Torco RTF is what I'll be testing.
One H23 tranny gets balky after 20-25 minutes. A cooler and pump was added and it was perfect the whole race. The tranny cooler setup for ITS is questionable in the rules, so a solution is need for 40 minute races.
I can get it for $15 a liter shipped to me right now.
-
I havn't had the best of luck with torco but i've never had a single problem with purp.
-
Ive run straight purp 10/30 in H trannys and beaten the shit out of it hard, no issues. Same with their Syncromesh fwiw.
The trannys failed from my fat foot way before an issues with the lubricants.
Id like to insrtall a cooler and pump regardless as I do take the car on 1-2 hour jaunts, but the bearsnot ispretty resiliant.
-
Ive run straight purp 10/30 in H trannys and beaten the shit out of it hard, no issues. Same with their Syncromesh fwiw.
The trannys failed from my fat foot way before an issues with the lubricants.
Id like to insrtall a cooler and pump regardless as I do take the car on 1-2 hour jaunts, but the bearsnot ispretty resiliant.
Yeah that stuff seams to work very good for you. The only problem i could think with it is that its so thick so it creates more heat. Cooler is a great Idea.
-
Ive run straight purp 10/30 in H trannys and beaten the shit out of it hard, no issues. Same with their Syncromesh fwiw.
The trannys failed from my fat foot way before an issues with the lubricants.
Id like to insrtall a cooler and pump regardless as I do take the car on 1-2 hour jaunts, but the bearsnot ispretty resiliant.
You should make a jaunt over my way and show me the ropes on rebuilding one of these things.
-
Ive run straight purp 10/30 in H trannys and beaten the shit out of it hard, no issues. Same with their Syncromesh fwiw.
The trannys failed from my fat foot way before an issues with the lubricants.
Id like to insrtall a cooler and pump regardless as I do take the car on 1-2 hour jaunts, but the bearsnot ispretty resiliant.
You should make a jaunt over my way and show me the ropes on rebuilding one of these things.
IIRC Spikers only had H/F tranny's apart so He'd be lost :-P
-
MR Ross speaks the truth.
-
MR Ross speaks the truth.
Useless once again :-*
-
So is your mom niggle
-
True, her rates are much less reasonable then yours :noel:
-
Well played sir.. Well played :noel:
-
I can help if you want, but I'm pretty busy for the next few weeks, I have to get my dads boat fixed (fiberglass and re wood the front cabin on his boat) and get my motor in my boat aaaaaaannnnnnddd work.
-
Shit, that would be sweet man. Just need to get it done before the dyno meet. I'd pay with beer, lumpia, OC or what ever you require.
-
Shit, that would be sweet man. Just need to get it done before the dyno meet. I'd pay with beer, lumpia, OC or what ever you require.
Keep in touch, if work goes back to being completely dead i can do it during the week, but so far this week is booked.
-
Still waiting for parts to arrive. Will get in touch with you when everything is here and ready to go.