:::RHMT::: Real Home Made Turbo
General Category => Hybrid/Tech => Topic started by: soontobeDA on April 01, 2010, 02:16:58 AM
-
is there any company that makes valve bucket shims? Besides oem for nissan?
just did a valve job and i need all new shims for proper valve clearances
is there a company that makes them besides oem ?
i need 16 shims @ 10 bucks each its rapage
thanks nogs
-
There is am article in this months D-Sport addressing the Ka24DE and they used Supertech shim buckets to cut weight.
I just check the supertech website and they are redesigning there site so you can not get any ifo unless you call them. 408-988-1234
Do not see any on egay, usually there is some. :?:
-
There is am article in this months D-Sport addressing the Ka24DE and they used Supertech shim buckets to cut weight.
I just check the supertech website and they are redesigning there site so you can not get any ifo unless you call them. 408-988-1234
Do not see any on egay, usually there is some. :?:
408 number?
Thats in your hood Tony
-
yah supertech is in san jose
i droped by a few times to talk to them and grab my supertech replacement pistons on my last build!
it looks like mabe i fucked the measurements lol
going to finish ring fitting and all the bottom end before i remeasure
this is a daily driver rebuild.
new pistons, rings, bearings, .020 over