:::RHMT::: Real Home Made Turbo
General Category => Fabrication => Topic started by: NoPistons! on May 05, 2010, 03:06:50 PM
-
OOOOR. source the proper v-band?
Not like i'm raping the wallet either way.....
What would oczc do?
-
I think it was Aaron that did that once. Im not sure, but hell yes. Doo work. :yes:
-
weldit
-
Buy the flange ya cheap ass. :?:
-
Did you get the dump tube from Burger King?
-
Ruin the resale of the wastegate for when your shit blows up in 30 miles and you get snady and part it out, ultimately losing more money. DO IT.
-
I think it was Aaron Cake that did that on TINA.
-
Buy the flange ya cheap ass. :?:
:yes:
-
ebay gate weld it
new tial or comparable get the flange...
-
I guess i'm just not a fan of ruining shit no matter how cheap it is.
-
If you are talking about the setup you wanted to get from me, no dump tube is needed. The outlet of the 'gate points to the ground under passenger side floor board.
-
Yeah, that would be said gate. I need an excuse to take a holesaw to my sideskirt.
eh, ebay has 60mm v band gate dump tubes. for $15. Still need to find the proper clamp and i'm damn sure not investing $50 into this setup. Fuck that. That's oil line money or money to put towards cdm anti surge gt3582 hotness..... I will probably weld the shit on though. Think of it as going on a demolition derby car considering is so fucked as a daily i can't help but get crazy with it.
-
I'm assuming this isn't a Honda setup?
Don't bother with a dump tube unless you want to recirculate it, or it's in an engine bay. Practiacally all mid- and rear-mount kits I've seen have no dump tube whatsoever. Just beware of theft. A guy I know had a mid-kit on a newer chevy or something, and some nog ganked his Tial just by taking out 2 bolts. He wondered why it was so loud and stopped making boost.
-
Shit like that makes me want to tack straps across all my flange joints. >:(
-
ebay gate weld it
new tial or comparable get the flange...
-
OOOOR. source the proper v-band?
Not like i'm raping the wallet either way.....
What would oczc do?
Weld that sonz a bitch!
-
jb weld it
-
jb weld it
It will fail, it's too hot!
-
Shut your whore mouth frenchie, dont ever speak ill of JB weld or we'll raise a fund to send BDVT to you and rape your whore french mouth.
-
Shut your whore mouth frenchie, dont ever speak ill of JB weld or we'll raise a fund to send BDVT to you and rape your whore french mouth.
+0.75
Not to be an asshole, but it seems wrong to send Spkier a quarter of the way around the world to have a good time.
Wait, that's what you guys did for me. :( :( :(
Fuck, I owe you guys.
-
I'm assuming this isn't a Honda setup?
Don't bother with a dump tube unless you want to recirculate it, or it's in an engine bay. Practiacally all mid- and rear-mount kits I've seen have no dump tube whatsoever. Just beware of theft. A guy I know had a mid-kit on a newer chevy or something, and some nog ganked his Tial just by taking out 2 bolts. He wondered why it was so loud and stopped making boost.
I might not have to unless i plan on going single on the swap i'm buying. Rotary rwd.
This dude i know up in charlotte told me a story of how he jacked up one side of someones car and took a sawzall to it to steal his thermal rnd exhaust (high priced dsm item that they nut over like retards vs making their own for a 1/4 of the price). I dont put that shit past anyone.
I dont have a latch, just hood pins. The area i live in, i'm not worried about people stealing shit off my car. They dont even know what my car is.
-
Shut your whore mouth frenchie, dont ever speak ill of JB weld or we'll raise a fund to send BDVT to you and rape your whore french mouth.
I've used more JB Weld in my car than probably all your car together. The only place where it fails is on the Wastegate so fuck you. I always carry a industrial size package of JB Weld in my trunk also :mexi:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Flh6.ggpht.com%2F_ttHKvikk-8g%2FSNP3Qz871LI%2FAAAAAAAAASs%2FRva7lebGapE%2Fs800%2FDSC07780.JPG&hash=0a4b50c6ef144355b4d6688cbc24b75a165c1df7)
-
This dude i know up in charlotte told me a story of how he jacked up one side of someones car and took a sawzall to it to steal his thermal rnd exhaust
Ban for not being "this dude I killed"
-
Shut your whore mouth again frenchie. I used JB weld on my charge piping to make the transition from a 2in pipe to a 2.5 inch pipe, Took a fuckton of JB weld.
-
Stop being a faggot and get this setup from me.
-
Shut your whore mouth again frenchie. I used JB weld on my charge piping to make the transition from a 2in pipe to a 2.5 inch pipe, Took a fuckton of JB weld.
That's 1/4 of what I have on my car, fuck you!
-
NO FUCK YOU YOU DIRTY FUCKING CANUK FUCKKKKKKKKKKKKKKKK YOUUUUUUUUUUU
-
NO YOU!
-
jb weld never fails. only you fail at jb welding or metal under it fails to hold jb weld. i will make a ak47 out of jb weld and go to anyone who says otherwise
-
jb weld never fails. only you fail at jb welding or metal under it fails to hold jb weld. i will make a ak47 out of jb weld and go to anyone who says otherwise
EXACTLY! I second that... true dude right hear. get it from the best
-
I have been tempted to make a huge glob of JB weld and then machine it into something useful once it cures just to see how it would do. I can't afford that much JB weld though
-
Who is this mike oxfag and his homo lover 7808. Is it wednsday yet?