:::RHMT::: Real Home Made Turbo

General Category => Forced Induction => Topic started by: gdout90accord on May 18, 2010, 12:24:43 PM

Title: garrett t3t4 turbo center section trash? HELP
Post by: gdout90accord on May 18, 2010, 12:24:43 PM

hey guys just wondering if this center section is trash, check out the pix of the turbine end.

good side
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv417%2FGDOUT%2F09c3edc0-1.jpg&hash=5d3dcb5130d68533e8abc25fd0207c6c94c9e188)


bad side
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv417%2FGDOUT%2F24e5bb0e-1.jpg&hash=09ba20d29e1cd6697c1a224dd1287be7caaa65c1)

Title: Re: garrett t3t4 turbo center section trash? HELP
Post by: crxvtec91 on May 18, 2010, 06:28:55 PM

Those pic's suck, we need better pic's to tell.

Title: Re: garrett t3t4 turbo center section trash? HELP
Post by: turbob16hatch on May 18, 2010, 07:33:30 PM

Agree pics suck balls.

But from what i can tell it looks like you have some oil coking between the backplate and the heatsheild. If you send this in for a rebuild they will clean that off.

Title: Re: garrett t3t4 turbo center section trash? HELP
Post by: gdout90accord on May 19, 2010, 04:46:53 AM

pix looks fine with me, first pic no hole on the side and on the second pic you see a hole thats like got bit off.

look at the red circled area.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv417%2FGDOUT%2F24e5bb0e-1-1.jpg&hash=3bd66ab0767ff23a6e055afc3c5f56f7660ff37e)

Title: Re: garrett t3t4 turbo center section trash? HELP
Post by: HiProfile on May 19, 2010, 09:40:33 AM

They look fine to you since you know what to look for, idiot. All we see is blurry shit from being too close.

Either take a picture on MACRO MODE more than 3 inches away from it, or on normal mode more than 30" away from it (zoomed in if possible). Then crop the picture if you want it that small. Why the hell are digital pictures so hard for people?

Title: Re: garrett t3t4 turbo center section trash? HELP
Post by: 92CXyD on May 19, 2010, 10:02:40 AM

We must be getting too nice in our old age. :?:

Where's your porn and build thread?

And while your added better picts of turbo issue and more porn. ;D

Or stay wendsday. :yes: :noel: 8)

Title: Re: garrett t3t4 turbo center section trash? HELP
Post by: Joseph Davis on May 19, 2010, 10:15:03 PM

Given the all-around crappy nature of your photos, we could likely tell you more about your CHRA by taking pics of the turbine shaft.