:::RHMT::: Real Home Made Turbo

General Category => Engine Management => Topic started by: chris on May 24, 2010, 11:10:20 PM

Title: Hakko 808 Desoldering Station
Post by: chris on May 24, 2010, 11:10:20 PM

http://www.amazon.com/Hakko-Desoldering-Kit-808-Gun/dp/B000ARPULW (http://www.amazon.com/Hakko-Desoldering-Kit-808-Gun/dp/B000ARPULW)


After years of using braid and doing 3 ecu's this weekend I figured Im done with braid. Anything else I should buy with the link above. Ill be using it just for honda ecu boards.

Title: Re: Hakko 808 Desoldering Station
Post by: Minor Threat on May 25, 2010, 01:08:40 AM

I use the 808 gun, works awesome, never looked back.

Title: Re: Hakko 808 Desoldering Station
Post by: lilpooh21186 on May 25, 2010, 02:31:13 AM

teh sex i can do an ecu in 20 min with my 808 reliable get the kit with the hot glove and all the bells and whistles i think min was in the 200 area but payed for its self the 1st week end i had it.

Title: Re: Hakko 808 Desoldering Station
Post by: t_cel_t on May 25, 2010, 02:39:19 AM

on a side note, you can get brass or stainless scour pads from the supermarket and they make awesome tip cleaners.

like this
http://www.amazon.com/Hakko-Cleaner-599B-02-Non-Corrosive-Needed/dp/B000PDQORU/ref=pd_cp_hi_2 (http://www.amazon.com/Hakko-Cleaner-599B-02-Non-Corrosive-Needed/dp/B000PDQORU/ref=pd_cp_hi_2)

Title: Re: Hakko 808 Desoldering Station
Post by: Joseph Davis on May 25, 2010, 05:59:04 AM

http://store.sra-solder.com/product.php?xProd=6369&xSec=22 (http://store.sra-solder.com/product.php?xProd=6369&xSec=22)

http://store.sra-solder.com/product.php?xProd=6417&xSec=22 (http://store.sra-solder.com/product.php?xProd=6417&xSec=22)

Title: Re: Hakko 808 Desoldering Station
Post by: BangBusMaster on May 26, 2010, 03:28:24 AM

Do you like those?

Title: Re: Hakko 808 Desoldering Station
Post by: Joseph Davis on May 26, 2010, 03:48:26 AM

Yes.  They are supposed to be backdoored Hakkos, in the same manner that BLOX found the china company manufacturing older Skank9 gear and undercut Skank with it.

I've had this for around a year now, I have used it a lot:  http://store.sra-solder.com/product.php/6267/0 (http://store.sra-solder.com/product.php/6267/0)

Title: Re: Hakko 808 Desoldering Station
Post by: SgtB on May 27, 2010, 10:18:19 PM

Quote from: t_cel_t on May 25, 2010, 02:39:19 AM

on a side note, you can get brass or stainless scour pads from the supermarket and they make awesome tip cleaners.

like this
http://www.amazon.com/Hakko-Cleaner-599B-02-Non-Corrosive-Needed/dp/B000PDQORU/ref=pd_cp_hi_2 (http://www.amazon.com/Hakko-Cleaner-599B-02-Non-Corrosive-Needed/dp/B000PDQORU/ref=pd_cp_hi_2)

The first time I used one of those I was pissed I had ever used a wet sponge. It cleans everything off the tip and makes it look like you just tinned it. I have a cup with really fine, long brass shavings in it. Works awesome.

I've used the self vacuuming gun before. It was great for bigger stuff. The tips can be had in smaller sizes, but you have to be fast and careful on smaller items. If you don't have a station handy, you can make a air damn around the part with aluminum foil and use a heat gun. Liquify solder, smack upside down on table. A little braid work cleans the mess up.

Title: Re: Hakko 808 Desoldering Station
Post by: clwtwizted on May 27, 2010, 11:23:02 PM

Straight Iron and a tooth pick. :yes: Simple and quick.

Title: Re: Hakko 808 Desoldering Station
Post by: lilpooh21186 on May 28, 2010, 09:36:36 AM

Craig moates how to chip obd1 Honda ecu's on YouTube shows this cum guzler in action.

Title: Re: Hakko 808 Desoldering Station
Post by: ryan89crx on May 28, 2010, 07:10:08 PM

The Moates vids make that Hakko look stupid easy

Title: Re: Hakko 808 Desoldering Station
Post by: chris on May 28, 2010, 07:35:07 PM

Quote from: ryan89crx on May 28, 2010, 07:10:08 PM

The Moates vids make that Hakko look stupid easy

Thats because it is.

Title: Re: Hakko 808 Desoldering Station
Post by: Joseph Davis on May 28, 2010, 08:58:00 PM

No it's not.  Ask Michael J. Fox - Michael's not stupid, but he can't use one.

Title: Re: Hakko 808 Desoldering Station
Post by: FreshDA9 on May 28, 2010, 10:25:36 PM

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv227%2Fbluec4%2F2w385kn.jpg&hash=2cbdc91fb133796a80b77a01ddf408ebd01feb06)

 

Title: Re: Hakko 808 Desoldering Station
Post by: onlyflash944 on May 28, 2010, 10:33:36 PM

those last two posts made me lol