:::RHMT::: Real Home Made Turbo

General Category => Fabrication => Topic started by: weirtech on May 28, 2010, 04:40:22 PM

Title: who can guess what this is for?
Post by: weirtech on May 28, 2010, 04:40:22 PM: (https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fweirtech.ca%2Fgallery%2Falbums%2Fuserpics%2F10001%2FDSC01036.JPG&hash=a9712110f1a64d15a1028de3dc059c955bd95e9d)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fweirtech.ca%2Fgallery%2Falbums%2Fuserpics%2F10001%2FDSC01037.JPG&hash=6a08f092bb7b898b5e789009fdb7eda9b431d277)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fweirtech.ca%2Fgallery%2Falbums%2Fuserpics%2F10001%2FDSC01038.JPG&hash=3e7565ca078a64c545834fc2a42bb52242a41e7a)
Title: Re: who can guess what this is for?
Post by: Passenger on May 28, 2010, 04:46:39 PM: A blower flange and a 6 cylinder plenum of sorts?
Title: Re: who can guess what this is for?
Post by: bigdaddyvtec on May 28, 2010, 04:56:27 PM: Quote from: Passenger on May 28, 2010, 04:46:39 PM
A blower flange and a 6 cylinder plenum of sorts?

winner
Title: Re: who can guess what this is for?
Post by: danz on May 28, 2010, 06:44:20 PM: VR6?
Title: Re: who can guess what this is for?
Post by: ryan89crx on May 28, 2010, 07:13:46 PM: It's dead sexy that's for sure
Title: Re: who can guess what this is for?
Post by: snm95ls on May 28, 2010, 09:23:14 PM: The blower is M90 from a GM supercharged 3800. Dunno what make the engine the adapter is for.
Title: Re: who can guess what this is for?
Post by: 1991civicsi on May 28, 2010, 10:13:08 PM: VQ?
Title: Re: who can guess what this is for?
Post by: onlyflash944 on May 28, 2010, 10:32:01 PM: parts for a rwd crx?
Title: Re: who can guess what this is for?
Post by: Passenger on May 29, 2010, 02:00:44 AM: This is not difficult enough, someone guess what this is:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi94.photobucket.com%2Falbums%2Fl83%2F935racer%2FP1010046.jpg&hash=52cf91f5620f374488ba14a23854b51c4d8532cb)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi94.photobucket.com%2Falbums%2Fl83%2F935racer%2FP1010042.jpg&hash=e8e8c7080b5a50e2218d1a5d0cbc9b0b110030b3)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi94.photobucket.com%2Falbums%2Fl83%2F935racer%2FP1010043.jpg&hash=406ba8c82642aa0a721d0a56c01c8182bca26c01)
Title: Re: who can guess what this is for?
Post by: Corey on May 29, 2010, 04:57:10 AM: aaron its a plenum adapter for a J series motor to an eaton blower.

passenger.. a hint maybe?
Title: Re: who can guess what this is for?
Post by: weirtech on May 29, 2010, 07:48:07 AM: dave was right from the get go, but corey and snm95ls filled in the blanks.

as for what dave's is, i have no clue, some weird fairing stay or something?
Title: Re: who can guess what this is for?
Post by: HiProfile on May 29, 2010, 11:35:32 AM: Definately j(unk)32 adapter. :D https://www.corsportusa.com/store/catalog/images/p2r-111.jpg (https://www.corsportusa.com/store/catalog/images/p2r-111.jpg) Please tell us it will use an aftermarket blower case.

Quote from: Passenger on May 29, 2010, 02:00:44 AM
This is not difficult enough, someone guess what this is:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi94.photobucket.com%2Falbums%2Fl83%2F935racer%2FP1010046.jpg&hash=52cf91f5620f374488ba14a23854b51c4d8532cb)

God that's simple. 5-stage nitrous for a stock D15B2 manifold, with integrated cheese cutter.

My only serious guess is volvo or audi fab, assuming you're posting a car item to a car site. Not many things need 5 holes for stuff. It has a lot of work into it, whatever it's for.
Title: Re: who can guess what this is for?
Post by: narfdanarf on May 29, 2010, 12:11:43 PM: kinda looks like a upper control arm, but it's obviously not.
Title: Re: who can guess what this is for?
Post by: Passenger on May 29, 2010, 12:35:33 PM: Alright I'm not being fair, its not an automotive part.
Think about sitting back and unpleasant feelings in your mouth :?:
Title: Re: who can guess what this is for?
Post by: bigwig on May 29, 2010, 01:08:29 PM: Quote from: Passenger on May 29, 2010, 12:35:33 PM
Alright I'm not being fair, its not an automotive part.
Think about sitting back and unpleasant feelings in your mouth :?:

ban for gay porn!
Title: Re: who can guess what this is for?
Post by: highroller54 on May 29, 2010, 01:14:38 PM: Quote from: Corey on May 29, 2010, 04:57:10 AM
aaron its a plenum adapter for a J series motor to an eaton blower.

is its for that ek with the J series that was in Honda Tuning? I remember you posting about building him one so I didn't "guess" what they are for.
Title: Re: who can guess what this is for?
Post by: ryan89crx on May 29, 2010, 01:21:11 PM: Quote from: Passenger on May 29, 2010, 12:35:33 PM
Alright I'm not being fair, its not an automotive part.
Think about sitting back and unpleasant feelings in your mouth :?:
Passing out at Hotrex's house?
Title: Re: who can guess what this is for?
Post by: SloS13 on May 29, 2010, 02:26:58 PM: Quote from: ryan89crx on May 29, 2010, 01:21:11 PM
Quote from: Passenger on May 29, 2010, 12:35:33 PM
Alright I'm not being fair, its not an automotive part.
Think about sitting back and unpleasant feelings in your mouth :?:
Passing out at Hotrex's house?
BHWAHAHAHA
Title: Re: who can guess what this is for?
Post by: turbob16hatch on May 29, 2010, 03:34:36 PM: Quote from: Passenger on May 29, 2010, 12:35:33 PM
Alright I'm not being fair, its not an automotive part.
Think about sitting back and unpleasant feelings in your mouth :?:

Air distribution block for the dentist tools? Maybe it attaches to the stem of the overhead light. No idea. thats pretty obscure. haha
Title: Re: who can guess what this is for?
Post by: 1991civicsi on May 29, 2010, 06:06:47 PM: Kirby vacuum cleaner parts
Title: Re: who can guess what this is for?
Post by: dvst8r on May 29, 2010, 07:55:34 PM: I am going to go with a part of a _____ chair...

But I have an unfair advantage as I had beers at Dave's shop last night.
Title: Re: who can guess what this is for?
Post by: highroller54 on May 29, 2010, 08:44:06 PM: Barber chair?
Title: Re: who can guess what this is for?
Post by: Passenger on May 29, 2010, 09:20:24 PM: Quote from: Passenger on May 29, 2010, 12:35:33 PM
Think about sitting back and unpleasant feelings in your mouth :?:

Quote from: highroller54 on May 29, 2010, 08:44:06 PM
Barber chair?

:?: You do some weird shit at the barbers :?:
Title: Re: who can guess what this is for?
Post by: Hotrodlincoln on May 29, 2010, 09:31:19 PM: ..
Title: Re: who can guess what this is for?
Post by: highroller54 on May 29, 2010, 10:26:01 PM: Quote from: Passenger on May 29, 2010, 09:20:24 PM
Quote from: Passenger on May 29, 2010, 12:35:33 PM
Think about sitting back and unpleasant feelings in your mouth :?:

Quote from: highroller54 on May 29, 2010, 08:44:06 PM
Barber chair?

:?: You do some weird shit at the barbers :?:

LOL, I need to start reading :mexi:
Title: Re: who can guess what this is for?
Post by: SgtB on May 30, 2010, 04:07:54 PM: Air manifold for a dentists chair with a hanger for the tools. Looks very nice. Has a very organic look to it. Either that or a tattoo artist who uses lots of guns.
Title: Re: who can guess what this is for?
Post by: Passenger on May 30, 2010, 04:46:41 PM: Quote from: SgtB on May 30, 2010, 04:07:54 PM
Air manifold for a dentists chair with a hanger for the tools. Looks very nice. Has a very organic look to it. Either that or a tattoo artist who uses lots of guns.

Yep. It'll be in Finland by the end of the week for some sort of dental show.
Title: Re: who can guess what this is for?
Post by: SDRAWKCAB on May 30, 2010, 06:40:44 PM: Quote from: Passenger on May 29, 2010, 09:20:24 PM
Quote from: Passenger on May 29, 2010, 12:35:33 PM
Think about sitting back and unpleasant feelings in your mouth :?:

Quote from: highroller54 on May 29, 2010, 08:44:06 PM
Barber chair?

:?: You do some weird shit at the barbers :?:

Did you know the toothbrush was invented in Kentucky??
.
.
.
.
.
.
.
.
.

yeah, from any other state it would have been called the TEETHbrush

Da dump ttss
Title: Re: who can guess what this is for?
Post by: weirtech on June 17, 2010, 11:49:12 AM: (https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fweirtech.ca%2Fgallery%2Falbums%2Fuserpics%2F10001%2FDSC01066.JPG&hash=dc77b1b8181ee9c836ad02f92bcc4771dd44dbff)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fweirtech.ca%2Fgallery%2Falbums%2Fuserpics%2F10001%2FDSC01068.JPG&hash=63196e0a0b7394073575ed3f182215c174713915)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fweirtech.ca%2Fgallery%2Falbums%2Fuserpics%2F10001%2FDSC01070.JPG&hash=e7006f8840e2976107acc34ec9069d34661525e3)

adjustable tensioner bracket:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fweirtech.ca%2Fgallery%2Falbums%2Fuserpics%2F10001%2FDSC01071.JPG&hash=ad3da939f274d97616b386025952531552b7f072)

intake adapter:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fweirtech.ca%2Fgallery%2Falbums%2Fuserpics%2F10001%2FDSC01073.JPG&hash=b83f51f7946fd036bfe7435e9b8ee73c68cd040b)
Title: Re: who can guess what this is for?
Post by: jabberwock on June 17, 2010, 12:02:57 PM: Deeetaaaaiiiilssss
Title: Re: who can guess what this is for?
Post by: weirtech on June 17, 2010, 12:04:46 PM: i'm not sure about details on the setup with regards to tuning, etc... all i know is that it is going in a civic hatch.
Title: Re: who can guess what this is for?
Post by: jabberwock on June 17, 2010, 12:11:26 PM: :o
Title: Re: who can guess what this is for?
Post by: N1 Andy on June 28, 2010, 10:57:08 AM: holy fuck, that hood is REALLY not gonna close now.
Title: Re: who can guess what this is for?
Post by: 92CXyD on June 28, 2010, 06:11:40 PM: Quote from: N1 Andy on June 28, 2010, 10:57:08 AM
holy fuck, that hood is REALLY not gonna close now.

With the j-series you have to cut the hood anyways.

Curious how much for the adapter in the first post?

I may have a customer for you if we can figure out the fuel management out. ;D
Title: Re: who can guess what this is for?
Post by: weirtech on June 29, 2010, 09:51:02 AM: $750, two half adapter, includes hardware. you will still need to make the tb adapter and a pulley tensioner.
Title: Re: who can guess what this is for?
Post by: 92CXyD on June 29, 2010, 10:42:36 AM: Quote from: weirtech on June 29, 2010, 09:51:02 AM
$750, two half adapter, includes hardware. you will still need to make the tb adapter and a pulley tensioner.

Cool I'll pass this along to my buddy.
Title: Re: who can guess what this is for?
Post by: highroller54 on July 03, 2010, 12:19:41 PM: Quote from: N1 Andy on June 28, 2010, 10:57:08 AM
holy fuck, that hood is REALLY not gonna close now.

I dont think thats going to be a problem, its going on this

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ffarm4.static.flickr.com%2F3500%2F3708603034_ee0754e0a4.jpg&hash=182dceaf40fb45c81db97824a25bdf025112e3ef)
Title: Re: who can guess what this is for?
Post by: weirtech on July 12, 2010, 11:21:38 AM: (https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi909.photobucket.com%2Falbums%2Fac297%2Fak0831%2FImport%2520Expo%2FIMG_1124.jpg&hash=8b19788f7393acb440f1331f10f1a2eb943a6ca4)
Title: Re: who can guess what this is for?
Post by: bigdaddyvtec on July 12, 2010, 11:35:36 AM: My penis got a bit hard for just a second
Title: Re: who can guess what this is for?
Post by: onlyflash944 on July 12, 2010, 03:30:39 PM: how does it look with the hood on?
Title: Re: who can guess what this is for?
Post by: 92CXyD on July 12, 2010, 03:32:07 PM: Quote from: onlyflash944 on July 12, 2010, 03:30:39 PM
how does it look with the hood on?

LOL

if it has a hood it would not be much of a hood. :?: ;D
Title: Re: who can guess what this is for?
Post by: bigdaddyvtec on July 12, 2010, 03:55:24 PM: God I bet that thing is a fucking BLAST to drive, if hes running any kind of man boost level.
Title: Re: who can guess what this is for?
Post by: onlyflash944 on July 12, 2010, 03:58:25 PM: Quote from: bigdaddyvtec on July 12, 2010, 03:55:24 PM
God I bet that thing is a fucking BLAST to drive, if hes running any kind of man boost level.

probably, hope they do something to the front end. i wonder how much weight they added
Title: Re: who can guess what this is for?
Post by: LS1pwNzJ00 on July 12, 2010, 09:45:50 PM: Does look pretty cool, too bad those superchargers are really only good for 350ish MAX.
Title: Re: who can guess what this is for?
Post by: Gold DA9 on July 13, 2010, 01:08:26 AM: Hasport did come out with mounts that allowed the hood to close, but then ground clearance was lost.

But with this M90 all is lost.
Title: Re: who can guess what this is for?
Post by: weirtech on July 13, 2010, 09:13:53 AM: btw, i also did the brake upgrade:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ffarm5.static.flickr.com%2F4099%2F4787344583_6d61a9559b_b.jpg&hash=cec0e90f01d54e5e573547c49c8d8947c454d201)
Title: Re: who can guess what this is for?
Post by: SDRAWKCAB on July 13, 2010, 01:19:55 PM: Shit is baller.
I think we found a new front page just from fab goodness.
Title: Re: who can guess what this is for?
Post by: onlyflash944 on July 13, 2010, 01:28:15 PM: i'd use stock hood, with a big hood cowl so that way it would cover the most stuff it could.

is this a DD?
Title: Re: who can guess what this is for?
Post by: weirtech on July 14, 2010, 08:48:55 AM: i think it is more of a show car, but today he is driving it down to tenn for some show down there.
Title: Re: who can guess what this is for?
Post by: onlyflash944 on July 16, 2010, 01:39:15 AM: well at least he is driving it and it isn't a trailer queen
Title: Re: who can guess what this is for?
Post by: weirtech on July 17, 2010, 03:43:05 PM: hood on:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ffarm5.static.flickr.com%2F4116%2F4800744458_7dcc65f435_b.jpg&hash=5206538518d4f6f1d3c69ee1ffecf21c0a57e5b3)
Title: Re: who can guess what this is for?
Post by: jabberwock on July 17, 2010, 11:11:51 PM: That hood needs a bulge about the size of the one in my panties right now.
Title: Re: who can guess what this is for?
Post by: turbob16hatch on July 17, 2010, 11:54:21 PM: damn!!!! :o
Title: Re: who can guess what this is for?
Post by: jarebear667 on July 18, 2010, 10:10:24 AM: that car was in an inssue of honda tuning a few months ago im sure of it.
Title: Re: who can guess what this is for?
Post by: highroller54 on July 18, 2010, 10:16:27 AM: Quote from: jarebear667 on July 18, 2010, 10:10:24 AM
that car was in an inssue of honda tuning a few months ago im sure of it.

yes it was, it used to have a red engine bay.
Title: Re: who can guess what this is for?
Post by: jarebear667 on July 18, 2010, 10:27:56 AM: they must have put the other mounts in it now the the superchager is the only thing hangin out, that catshit color vw makes me sick
Title: Re: who can guess what this is for?
Post by: Joseph Davis on July 19, 2010, 09:33:28 PM: A dude I know is at Import Alliance, seems Aaron's boy drove all the way down to Nashville, TN, in the wee beastie. My friend is sending me pics.

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Ffarm5.static.flickr.com%2F4141%2F4802707399_e215a9e32c_b.jpg&hash=46ecd11134b05ee2b662169a0c621b784ebc6ba8)