:::RHMT::: Real Home Made Turbo
General Category => Hybrid/Tech => Topic started by: jdmhatchracer94 on June 16, 2010, 07:19:30 PM
-
at the dyno day JD and i were takin intake valves for the ls I believe it was the prelude b21a1 motor was said to be larger but same length? I looked up on napa website and the b21a1 valves are:
head diameter: 32.995mm
lenght: 104.394 mm
B18b:
Head diameter: 31.09
lenght: 105.537
thats all I can find does anyone know which valves are the right one?
-
Jd is the only one Im sure who has dove into this on this board. Make sure you do bowl work to match the valves on the head!
-
I am gonna have a shop to everything just need to remember which ones
-
its not cost effective if you are not the one doing it because you will need larger seats installed, I am planning on giving it a try but it has been put on the back burner, but the b21a1 is what i have written down to work and is what i plan on using
-
its not cost effective if you are not the one doing it because you will need larger seats installed,
Eight seats at $5/per and install per seat is ~$3.50. Oh noes, not $70 after tax Especially since you had to pay nothing for some B20A/B21A1 valves. TOO MUCH :'( :'( :'(
-
where the hell are you getting those prices 5.00 dollars a seats seams possible but 3.50 to cut the head for larger seats, heat the head and install the seats and cut the seat angles say a minimum of 3, maybe in china that cost 3.50 You still need to enlargen the bowls and by that time you could have just had a b16 head, but hey if you could find me a shop that would do it for your price it would be bad ass
-
If they don't have a flow bench leave that bowl alone
p
-
If they don't have a flow bench leave that bowl alone
p
If you don't have a clue, don't comment?
-
okay so got on majestic's site to order the seats but they dont show by engine code shows a prelude 2.0 and a 2.05 I assume it is the 2.05 but can anyone confirm?
-
measure the stock ls seat's od and id, add 2mm, see if those dimensions match the one listed
-
doesn't list any. seriously you think I wouldn't have done that.
-
then why didnt you try to look up a seat with those dimensions
-
This thread makes me sad.
-
it makes baby jesus cry
-
What are you building?I just bought a P8R head for $75.
-
What are you building?I just bought a P8R head for $75.
Who is this nigger? Intro! NOW!
-
no shit your intro sux so you should send me the p8r head to make up for your lack of intro
-
What are you building?I just bought a P8R head for $75.
whoever sold it doesnt know the value of them. I have slanged p8r heads on ebay for 250+shipping
150 would be a fair deal for a p8r head
-
I have a P8R head sitting around.. no use for it..
-
I have a P8R head sitting around.. no use for it..
You are a n00b, we have no use for you.
-
I have a P8R head sitting around.. no use for it..
Then give it to me... ill even come pick it up...
-
damn didnt know people were still posting in this
-
I say sell motor buy dohc zc.
-
I have a P8R head sitting around.. no use for it..
You are a n00b, we have no use for you.
I was a member of the previous hmt site for many years. So really I am not that n00b.. hell I was invited to this site by buk.
-
I have a P8R head sitting around.. no use for it..
You are a n00b, we have no use for you.
I was a member of the previous hmt site for many years. So really I am not that n00b.. hell I was invited to this site by buk.
Really, we have no use for you.
-
I have a P8R head sitting around.. no use for it..
You are a n00b, we have no use for you.
I was a member of the previous hmt site for many years. So really I am not that n00b.. hell I was invited to this site by buk.
Really, we have no use for you.
-
if I could find a complete dohc zc for decent price around here I would for my hatch
-
I have a P8R head sitting around.. no use for it..
Seriously fucking final fantasy name? Get out more.