:::RHMT::: Real Home Made Turbo
General Category => Engine Management => Topic started by: ifly87 on September 02, 2010, 04:53:36 AM
-
For crome/cromepro? One of my buddies just finished his turbo setup, I chipped his ecu for him but cannot find a good working f22 bin. The bin from xeno's depository doesnt work, its all fucked up. Any help would be great, thanks.
-
We don't pass out base maps here. Its a dirty habit akin to not washing your feet.
-
We don't pass out base maps here. Its a dirty habit akin to not washing your feet.
or wiping your ass
-
We don't pass out base maps here. Its a dirty habit akin to not washing your feet.
Wrong, I will.
Have a couple from my f22b1 setup. I know of at least a few that had good luck with it that I sent it to
DSM 450s, .48/.50 t304e 15psi made like 260 on it. Ran idled and all the rest perfectly. Have another one for 880s and a 3 bar i made 300WHP; same motor...
All stock motor. LMK
-
We don't pass out base maps here. Its a dirty habit akin to not washing your feet.
Wrong, I will.
Have a couple from my f22b1 setup. I know of at least a few that had good luck with it that I sent it to
DSM 450s, .48/.50 t304e 15psi made like 260 on it. Ran idled and all the rest perfectly. Have another one for 880s and a 3 bar i made 300WHP; same motor...
All stock motor. LMK
I'll agree. His basemap did everything for me and more. A little rich at idle and a few kinks but nothin' the average person can't handle.