:::RHMT::: Real Home Made Turbo
General Category => General Discussion => Topic started by: jay on September 11, 2010, 01:32:21 AM
-
it comes with a G54B and a 5 speed tranny...
will the 4g63t bolt up to the 5 speed tranny?
anyone know anything about g54b's?
would i be able to find someone to trade a 4g63t for my g54b?
-
how many kg's of explosives can you cram into this conquest? also, how is your sister doing after your assault of her after leaving the house without her burkha?
-
Only the wide-block 4g motors bolt to the g54b trans. Good luck finding one.
The bellhousing from a Mazda b2600 will bolt to a narrowblock 4g63, and mate to the conquest trans.
http://www.projectzerog.com/ (http://www.projectzerog.com/)
G54b are garbage boat anchors.
-
Only the wide-block 4g motors bolt to the g54b trans. Good luck finding one.
The bellhousing from a Mazda b2600 will bolt to a narrowblock 4g63, and mate to the conquest trans.
http://www.projectzerog.com/ (http://www.projectzerog.com/)
G54b are garbage boat anchors.
thanks!
what do wide block 4g motors come in?
fuck.. have you ever come across a b2600 bellhousing? lol
ive only seen b2200's :(
-
fuck... car-parts.com lists only one in canada for 100 bucks but no us shipping :(
-
ha. found a place in nc that has the whole trans for 100.... lol
-
1987
Transmission
Mazda Pickup Not Rotary B2600 2.6,5SP,FLR,2WD
-
1987
Transmission
Mazda Pickup Not Rotary B2600 2.6,5SP,FLR,2WD
sounds like jd and robb get a visit from jay!!!
-
Illl be there on lonf adya noodles and I will tourch tbha tpiece of shit allah alhbar m,uhammdod bim abod
-
ok this kid has an extra trans for me.. i want to pick it up but how do i confirm its the right trans?
what markings should i look for?'
this is a pic of a supposid starion tranny...
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fimg819.imageshack.us%2Fimg819%2F4639%2Fstartranny.jpg&hash=82f6d7264b85a64d7ec05654728c760b2aebf8d2)
-
http://www.projectzerog.com/transmissions.shtml (http://www.projectzerog.com/transmissions.shtml)
Looks like the starion trans.
And looking at that page, you'd need the b2600 bellhousing AND an rx7 trans.
-
http://www.projectzerog.com/transmissions.shtml (http://www.projectzerog.com/transmissions.shtml)
Looks like the starion trans.
And looking at that page, you'd need the b2600 bellhousing AND an rx7 trans.
This is correct. Sorry I was drunk when I posted that.
-
http://www.projectzerog.com/transmissions.shtml (http://www.projectzerog.com/transmissions.shtml)
Looks like the starion trans.
And looking at that page, you'd need the b2600 bellhousing AND an rx7 trans.
This is correct. Sorry I was drunk when I posted that.
FUCK... good thing i didnt buy the trans :(
i caught that and figured robb never fucks up :/
so what cars do the wideblock 4g63t's come in?
-
i caught that and figured robb never fucks up :/
LOL I most definitely fuck up sometimes.
The easiest wide block to find would be a 4g64 from a mighty max, and drop a 63 head on it. Been done to death, all the info is on the site I posted at the top.
Wide-block 4g63 do exist, but they are uber-rare, ive never seen one IRL.
-
i caught that and figured robb never fucks up :/
LOL I most definitely fuck up sometimes.
The easiest wide block to find would be a 4g64 from a mighty max, and drop a 63 head on it. Been done to death, all the info is on the site I posted at the top.
Wide-block 4g63 do exist, but they are uber-rare, ive never seen one IRL.
bleh... i dont think they would allow a 4g64 to the dsm shootout lol
are those rx7 transmissions any good? with the b2600 bellhousing?
-
The rx7 trans holds plenty, but if your gonna drag race it, just source a TH350/400 and use one of Bill's adapter plates. They are dirt cheap.
-
conquests are cool too bad they are such pieces of shit
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fsphotos.ak.fbcdn.net%2Fhphotos-ak-snc1%2Fhs248.snc1%2F9524_100991756590003_100000375370536_23438_555321_n.jpg&hash=e7fa175837680d3670de4ece624af08f4f9af4f7)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fsphotos.ak.fbcdn.net%2Fhphotos-ak-snc1%2Fhs248.snc1%2F9524_100991759923336_100000375370536_23439_656082_n.jpg&hash=a332f4c4d2440b6e463393ce8318fc8b7b9a4bf5)
-
conquests are cool too bad they are such pieces of shit
Disagree. Nothing wrong with it that an LSx cant fix.
-
im fucking confused... so does the b2600 bellhousing swap/rx7 trans work with wideblock or narrowblock 4g63t's?
cant i just use the b2600 trans?
fuck my life
-
conquests are cool too bad they are such pieces of shit
Disagree. Nothing wrong with it that an LSx cant fix.
i guess if you replace all the electronics and the engine/trans
-
the interior layout is kinda gay, unless you love 80's styling.
-
conquests are cool too bad they are such pieces of shit
Can't beleave i agree, but i do. I would love to have one, but i think there's to much shit wrong to make it worth the "cool factor".
-
im fucking confused... so does the b2600 bellhousing swap/rx7 trans work with wideblock or narrowblock 4g63t's?
cant i just use the b2600 trans?
fuck my life
You can just use the b2600 trans, it is almost as strong as the rx7 but the ratios are shit.
-
im fucking confused... so does the b2600 bellhousing swap/rx7 trans work with wideblock or narrowblock 4g63t's?
cant i just use the b2600 trans?
fuck my life
You can just use the b2600 trans, it is almost as strong as the rx7 but the ratios are shit.
so does the b2600 bellhousing fit a wideblock or narrowblock 4g63?
-
conquests are cool too bad they are such pieces of shit
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fsphotos.ak.fbcdn.net%2Fhphotos-ak-snc1%2Fhs248.snc1%2F9524_100991756590003_100000375370536_23438_555321_n.jpg&hash=e7fa175837680d3670de4ece624af08f4f9af4f7)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fsphotos.ak.fbcdn.net%2Fhphotos-ak-snc1%2Fhs248.snc1%2F9524_100991759923336_100000375370536_23439_656082_n.jpg&hash=a332f4c4d2440b6e463393ce8318fc8b7b9a4bf5)
Pretty much the same thing as a Daytona
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fdodge-parts.uneedapart.com%2Fimages%2Fdodge-daytona-parts.jpg&hash=f423579f536e8e0ec25c1e1e569836c53e4ca953)
Didn't know there was 2 models
-
daytona is fwd
-
Pretty much the same thing as a Daytona
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fdodge-parts.uneedapart.com%2Fimages%2Fdodge-daytona-parts.jpg&hash=f423579f536e8e0ec25c1e1e569836c53e4ca953)
Didn't know there was 2 models
Completly different animal, and you apparently don't have any experience with them.
CANAPHAIL.
-
Pretty much the same thing as a Daytona
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fdodge-parts.uneedapart.com%2Fimages%2Fdodge-daytona-parts.jpg&hash=f423579f536e8e0ec25c1e1e569836c53e4ca953)
Didn't know there was 2 models
Completly different animal, and you apparently don't have any experience with them.
CANAPHAIL.
I don't touch to Amerifail car, sorry :-*
-
Daytona > Conquest
-
340 CID Conquest.
That was before LSx ruled the world.
-
get it.
-
why does it say 4g63 then g63b in parenthesis?
is the 4g63 and the g63b the same?
http://www.projectzerog.com/archives/ZeroGversion2/transmissions.shtml (http://www.projectzerog.com/archives/ZeroGversion2/transmissions.shtml)
under D50 Transmissions
so i can run a d50 transmission on a narrow block 4g63?
-
I think it's because they're rwd versions, or they're using the G54B code to dumb it down for starion people. Google G54B, and you'll find it's a 4G54 motor.
-
I have a feeling this thread will follow the same path as the welding thread
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Frix0r.nl%2Fimagemacros%2Fsucks.gif&hash=10f1fe540e278e8927cd3e1c16d47375c4cf88bd)
-
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Frix0r.nl%2Fimagemacros%2Fsucks.gif&hash=10f1fe540e278e8927cd3e1c16d47375c4cf88bd)
LOL
-
I have a feeling this thread will follow the same path as the welding thread
Be super entertaining?
-
Be an entertaining failure for a while.
I got bored with the welding thread about 2/3 of the way through, and then it sparked my interest right at the end again.
-
Be an entertaining failure for a while.
I got bored with the welding thread about 2/3 of the way through, and then it sparked my interest right at the end again.
lol this thread would be alot more entertaining if you knew what i want the swap for :?:
im just trying to figure out the cheapest easiest way to get a rwd 4g63 swap and it has to be a 4g63
-
are you dumb? the jspec starions came with 4g motors.
they bolt right the fuck up to the tranny.
-
Be an entertaining failure for a while.
I got bored with the welding thread about 2/3 of the way through, and then it sparked my interest right at the end again.
lol this thread would be alot more entertaining if you knew what i want the swap for :?:
im just trying to figure out the cheapest easiest way to get a rwd 4g63 swap and it has to be a 4g63
Are you building a self propelled, self powered welding trailer for a mobile manifold fabrication company?
-
are you dumb? the jspec starions came with 4g motors.
they bolt right the fuck up to the tranny.
Yes, kain. The wide-block 4g63 do bolt up to that trans. See my previous post about how they are more rare than hen's teeth, such that ive never seen one IRL before.
-
Be an entertaining failure for a while.
I got bored with the welding thread about 2/3 of the way through, and then it sparked my interest right at the end again.
In for a failure thread. Havent seen a thread as great as his welding thread in a while!!!
Most people learned not to tape a tripped breaker into the not tripped state, and then not put the fire out with water