:::RHMT::: Real Home Made Turbo
General Category => Engine Management => Topic started by: clwtwizted on October 08, 2010, 04:19:14 PM
-
I purchased a 3bar map sensor on ebay. Im trying to figure what the fuck it is before I put it on the car. Has any one ever used one of these? Im using crome and I see all the different maps to chose from and I dont know which one it is or what specs to use in the custom section. Please help.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=280562289017&viewitem=&sspagename=STRK%3AMEWNX%3AIT (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=280562289017&viewitem=&sspagename=STRK%3AMEWNX%3AIT)
What it looks like on the inside. Piece o shit phone.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi821.photobucket.com%2Falbums%2Fzz135%2Fclwtwizted1%2F1008001620.jpg&hash=d49c0e0d0f3d6e99eae126b410724adddd7a59b9)
-
I guess it is time for you to get out the Mityvac and watch the voltage as you change the pressure on the sensor...
-
It's either 0-4.9 volt GM calibration 3 bar, or a 0.5-4.5 volt Kavlico/clone calibration 3.5 bar. Should be pretty simple by monitoring atmospheric pressure at KOEO, and at idle.
-
Omnipower/Xenocron clone using a motorla type.
You should of made your own for $15 in supplies.
On Crome use Xenocrons 3.0 bar map. ;D
-
Oh yah, BTW, I got some of those $35/per Aub knockoff GM sensors. Works perfect.
-
Omnipower/Xenocron clone using a motorla type.
You should of made your own for $15 in supplies.
On Crome use Xenocrons 3.0 bar map. ;D
I used the xenocron 3 bar. I did some street tuning today. I got a good start on it, More fine tuning in the moring.