:::RHMT::: Real Home Made Turbo
General Category => Engine Management => Topic started by: walter on October 31, 2011, 08:27:26 PM
-
Hi guys, ive have problems this weeks trying to get hulog works properly, ok, suddenly hulog didnt works any more, tried to find problem , not luck, tried another ecu, upload same gold basemap and worked great, my mistake was to leave laptop plugged with ostrich and hulog all day until next day, of course laptop was low battery , and i charged battery , uploaded again map but this time i get solid CEL, everything was right except when i tried it again after to leave laptop plugged to ecu all day, not sure if this will fried ecu, im thinking samething happened with the first ecu i got problems..talked with Dave from moates and he doesnt know good what should be problem, told me replace C14 (same thing i was thinking about), leaving laptop until it dies could cause to damage ecu?
Thanks.
P.S Im looking for 1 or 2 OBD1 ecus!
-
Yes, I agree completely.
-
Yes, I agree completely.
there is a explanation about leaving laptop and C14? laptop take out or fried C14 or what exactly happens?
-
C14 can cause limp home mode.
Ostrich battery can be dying, causing it to lose it's program.
Ground loop with laptop overnight can cause Ostrich battery to go bad.
Your english is out of practice because you don't hang out here much anymore. FUCK YOU
-
C14 can cause limp home mode.
Ostrich battery can be dying, causing it to lose it's program.
Ground loop with laptop overnight can cause Ostrich battery to go bad.
Your english is out of practice because you don't hang out here much anymore. FUCK YOU
LOL, i know, my english right now is out..most important is fuckers understand what i means.
Thanks dude.