:::RHMT::: Real Home Made Turbo

General Category => Engine Management => Topic started by: PhilStubbs on November 06, 2011, 10:31:58 PM

Title: looking for good clear engine wiring harness diagram
Post by: PhilStubbs on November 06, 2011, 10:31:58 PM

anyone know of one for an EG? everything i can find online is blurry and useless.

Title: Re: looking for good clear engine wiring harness diagram
Post by: HiProfile on November 07, 2011, 01:25:51 AM

Well the 88mb 92-95 helms PDF manual floating around has one at the end. It's more a schematic than anything, but shows everything from the battery to the rear license plate lights. It also has wire colors IIRC.

Since this is rhmt I can't link to pirated material. O0 http://www.hondahookup.com/manuals/ (http://www.hondahookup.com/manuals/) but you need to make an account.

Title: Re: looking for good clear engine wiring harness diagram
Post by: crazy_ivan on November 07, 2011, 07:16:13 AM

The diagram and fuzzy ass pinouts in the 88mb 92-95 helms PDF are pree decent.
There were all I used to redo my harness.
 
You can also check out hondatech*info if you don't have any luck finding it elsewhere.

Title: Re: looking for good clear engine wiring harness diagram
Post by: PhilStubbs on November 07, 2011, 07:42:20 AM

I googled for probably an hour last night and everything I found was so bad that I could make out maybe 50% of the ecu pins and just a few wire colors.

Title: Re: looking for good clear engine wiring harness diagram
Post by: jabberwock on November 07, 2011, 07:37:54 PM

ecu pinout + multimeter

Title: Re: looking for good clear engine wiring harness diagram
Post by: PhilStubbs on November 07, 2011, 07:40:26 PM

yea, i started out that way. it was just real time consuming. i was hoping for something a little easier. its along story, but im attaching an ecu right to the firewall plugs.

also, so far i havent noticed it in any pinouts, which pin gives the ecu 12v+ to power it?

Title: Re: looking for good clear engine wiring harness diagram
Post by: ratcityrex on November 07, 2011, 07:51:55 PM

http://www.ff-squad.com/technet/ (http://www.ff-squad.com/technet/)

Title: Re: looking for good clear engine wiring harness diagram
Post by: PhilStubbs on November 07, 2011, 08:06:13 PM

yea, i have been using that and a multi-meter.

Title: Re: looking for good clear engine wiring harness diagram
Post by: DasPoop on November 07, 2011, 09:03:55 PM

Quote from: SecksyPeePee on November 07, 2011, 07:40:26 PM

also, so far i havent noticed it in any pinouts, which pin gives the ecu 12v+ to power it?

pretty sure its a25 and b1 they will be yellow and black and if you cut the ecu plugs back far enough i believe they come together to 1 feed.

Title: Re: looking for good clear engine wiring harness diagram
Post by: Joseph Davis on November 09, 2011, 12:21:35 AM

You haven't memorized OBD1 yet?   ::)