:::RHMT::: Real Home Made Turbo

General Category => Hybrid/Tech => Topic started by: 1slow91hf on April 15, 2009, 12:23:15 PM

Title: Y7 valve spring ?
Post by: 1slow91hf on April 15, 2009, 12:23:15 PM

im working on the motor for my DD and was wanting to do a valve spring upgrade for high rpm
ive found a lil bit of info saying the Z6 and Y8 springs will work in the Y7 head but nothing beyond that and that thread was on HT  :?:

and for flaming issues
the DD motor is
Y7
P29 pistons
ARP rod bolts
delta regrind cam "dont know which im going to run"
"unknown springs/retainers"
OBD1 swap with P06 ecu running crome
stock injectors with ADJ FPR for now then throwing in a set of 310cc

Title: Re: Y7 valve spring ?
Post by: ApexSilver06MR on April 15, 2009, 12:37:37 PM

i would use beefy a6 springs

Title: Re: Y7 valve spring ?
Post by: mycarslow on April 15, 2009, 01:51:46 PM

im also looking into this for my y7

Title: Re: Y7 valve spring ?
Post by: 1slow91hf on April 15, 2009, 02:39:58 PM

i did find out that FJT has them listed as fitting the Z6-Y7-Y8
http://fjdistributors.com/product_info.php?cPath=47_49_59&products_id=175 (http://fjdistributors.com/product_info.php?cPath=47_49_59&products_id=175)
 :noel:  :yes: