:::RHMT::: Real Home Made Turbo
General Category => Engine Management => Topic started by: fe3tcourier on February 20, 2012, 06:37:56 PM
-
The kid with FreeEMS engine number 10 could do with some data on his venom 720cc low z injectors. If anyone knows someone nearby who can help test them for a dead time curve and flow rates, that'd be great! Cheers :-)
http://forum.diyefi.org/viewtopic.php?f=3&t=1563&p=24036#p24036 (http://forum.diyefi.org/viewtopic.php?f=3&t=1563&p=24036#p24036)
Fred.
-
The kid with FreeEMS engine number 10 could do with some data on his venom 720cc low z injectors. If anyone knows someone nearby who can help test them for a dead time curve and flow rates, that'd be great! Cheers :-)
http://forum.diyefi.org/viewtopic.php?f=3&t=1563&p=24036#p24036 (http://forum.diyefi.org/viewtopic.php?f=3&t=1563&p=24036#p24036)
Fred.
I'd check with PFI in fort Collins and see if they have any connections, or since they venom inj.
OR Contact theidelone (Curtis) he may have some good leads for him down there. :noel:
Would this help?
http://users.erols.com/srweiss/tableifc.htm (http://users.erols.com/srweiss/tableifc.htm)
http://www.witchhunter.com/injectordata1.php4 (http://www.witchhunter.com/injectordata1.php4)
I use this a bit:
http://injector-rehab.com/shop/lag.html (http://injector-rehab.com/shop/lag.html)
:noel:
Just saw the pictures dude is from Carbon County area, my home town is the seat of it Rawlins.
(https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/429215_3371720931372_1219721191_5361112_602146061_n.jpg)
-
If all goes well I will be able to test deadtime at different voltages soon. It won't be perfect with a scope & all, but fairly close with the dynamic flow bench I'm making.
I presume he's using a resistor box?