:::RHMT::: Real Home Made Turbo
General Category => Forced Induction => Topic started by: hatchbone on May 06, 2012, 07:37:05 PM
-
so i purchased a ap1 s2000 three weeks back and decided that i was gonna go after the stock short block record for hp for s2000 in my new drag project,the current record was 759hp tuned by fullblown motor sports out of mn on there dynojet 424, so me and fullblown decided we would give it a shot on my car to see if we could better that so here is a couple pics and dyno vids of the car, and agian thanks to lj at fullblown cause with out him i prob would have never got these numbers out of this thing, and to do it all in two weeks start to finish is quit a accomplishment in it self, enjoy
Engine
Stock f22c
Ferrea Springs/retainers (We knew stock springs and retainers were the only thing that could spoil the party)
FBM H11 Headstuds
Turbo
FBM Stage 2 manifold Twin scroll
FBM 800hp Intercooler
FBM Intercooler piping and Downpipe/dumptube
Precision 6766 JB
Precision 46mm Wastegates
Tial 50mm BOV
Fuel
FIC 2150s
FBM XXL Fuel Rail
FBM Dual Pump Hanger
FBM FB340 pumps
FBM Fuel Regulator
FBM -10 Fuel Filter
Drivetrain
FBM Supra V160 Conversion
FBM 8.8 Rear Diff kit
FBM/DSS 5.9 Driveshaft/Axles
FBM Delrin Bushings
FBM Spec Clutchmasters Twin Disc
Misc
FBM Catchcan
FBM Radiator / Hoses
FBM Billet Radiator Brackets
FBM Spark Plug Cover
Haltech PNP ECU
Racepak Dash
TUNED on E85 @ 30-31 Psi.
This won't be no dyno queen. We are going to test this at the track shortly :)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMG_0949.jpg&hash=429988f7becdcf560eb94ecafe82602c9f84ca6d)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F522232_379864262064232_100001219856048_1119063_58177498_n.jpg&hash=d1c009ad895e1073873a1b9c7993f5f988b09865)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F318235_234342286666335_157554547678443_321664_374062409_n.jpg&hash=b57207d5c68ffee4395aaf4f0bb7cfd71990e48f)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2F7146762139_683b662849_o.jpg&hash=ba70fdd086ccb7c3f556021c461cdc73565c9802)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi124.photobucket.com%2Falbums%2Fp16%2Ffullblown2k%2Fjakes2k.jpg&hash=716a85230f636fb70db86c5b91d65f52eccdc9b4)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi415.photobucket.com%2Falbums%2Fpp236%2Fhatchbone%2FIMAG0759.jpg&hash=6dc6555ba0faf197c417474ac74f23fa8fc0a07b)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi124.photobucket.com%2Falbums%2Fp16%2Ffullblown2k%2F336754e4.jpg&hash=7a989acb9ca28d088a31a3dddfeec9f35d9dd20d)
Ballistics Jake :: Record breaking WHP :: 800.06whp! (http://www.youtube.com/watch?v=cxOLCybSvIE#ws)
lolz-lag aka anti lag (http://www.youtube.com/watch?v=rB1Rwp7VpvA#ws)
-
Fucking sick O0
-
and uninformed idiots on here laughed when i said you could make 500+ hp on a stock block :-*
-
Fuck anti lag is so loud its making the back window of the white car move! :o
-
i could have moved your OG post? i almost did anyway lol.
-
im-fucking-pressive!
-
Thanks foir the updates on the dyno son... So sick.
Looks great, exceot the faggot hood dumps, the picc wiht the fireballs in it is ILLLLLLLLLLLLLLLLLLLLLLLLLLL
Cant wait to see giggly videos of wheelies. You should let mode drive it so He can say hes actually driven something fast, since he cant build it himself ;O)
WORD!
-
i could have moved your OG post? i almost did anyway lol.
you could merge them if you like
-
Wow, I was thinking you'd go built head/etc. If it's all stock besides springs/retainers, that is just nuts.
I'd put some elbows on those dumps, last thing you want is the window weld/top catching on fire at >150mph.
-
Built head stock port stock cams and,h11 head studs is all
-
Fuck I want one of those turbos... ANd its A JB? Lights up like a cross in the south on a friday night.....
CEA wheels right?
-
Jb billet wheel
-
Built head stock port stock cams and,h11 head studs is all
IMO stock port, stock cams, and stock intake is a full stock top-end. Springs/retainers/studs are just for safety. Well done sir.
-
So were do I get a rhmt sticker for this slut
-
So were do I get a rhmt sticker for this slut
I have a friend working on some since no one has been selling them in the last year.
-
Let me know ill rep one
-
Unfuckingbelievable :evil:
This should motivate Weir to get his crx finished...
-
Weir needs a man size turbo :O)
-
and uninformed idiots on here laughed when i said you could make 500+ hp on a stock block :-*
Thjey laughed because "it's all in the tune" is what "faggots say" when they "can't afford" forged internals.
WHo's laughing now?!
Car's fully sick. Is it streetable or too much? I'm scrolling down and see f22 and figured you made rwd accord but hell, s2k's are legit too. Yes, i scrolled over the "AP1" part. It happens.
-
So were do I get a rhmt sticker for this slut
I have a vinyl cutter, if someone has a good picture of the decal, i can live trace and convert it, or if someone has the vector file that can send it to me, i can make a shit ton of them for a super cheap price....
-
So were do I get a rhmt sticker for this slut
I have a vinyl cutter, if someone has a good picture of the decal, i can live trace and convert it, or if someone has the vector file that can send it to me, i can make a shit ton of them for a super cheap price....
I have a jpeg of it, maybe you can convert it.
-
So were do I get a rhmt sticker for this slut
I have a vinyl cutter, if someone has a good picture of the decal, i can live trace and convert it, or if someone has the vector file that can send it to me, i can make a shit ton of them for a super cheap price....
I have a jpeg of it, maybe you can convert it.
send it, i think i can trace it in FlexiSign and cut it, the better the quality of the pic, the easier it will be to convert. Also, I'm gonna need to know sizes, like length and height.
-
So were do I get a rhmt sticker for this slut
I have a vinyl cutter, if someone has a good picture of the decal, i can live trace and convert it, or if someone has the vector file that can send it to me, i can make a shit ton of them for a super cheap price....
I have a jpeg of it, maybe you can convert it.
send it, i think i can trace it in FlexiSign and cut it, the better the quality of the pic, the easier it will be to convert. Also, I'm gonna need to know sizes, like length and height.
pm me your email
-
My email ?,
-
My email ?,
No I sent a jpeg I had to bouncinofftherevlimiter, he is going to make some!
-
My email ?,
No I sent a jpeg I had to bouncinofftherevlimiter, he is going to make some!
I have yet to receive said email...
-
read and wathched the vids earlier today, insane! Showed some friends at the dealer where i work. ofcorse they were in disbelief.
haters gonna hate! :D
-
Congratulations, that is impressive!
-
Hate comes from all over when you build some thing that fuck stomps all others,still waiting on word on these rhmt stickers
-
Hate comes from all over when you build some thing that fuck stomps all others,still waiting on word on these rhmt stickers
FUCK STOMP.
Trademark that shit son ;)
-
Hate comes from all over when you build some thing that fuck stomps all others,still waiting on word on these rhmt stickers
Still havnt received email or template in the mail....
-
i need stickers...
this S2000 is still badass (no others are btw)
-
Hate comes from all over when you build some thing that fuck stomps all others,still waiting on word on these rhmt stickers
FUCK STOMP.
Trademark that shit son ;)
I did lol
-
No one has the rhmt file ???
-
S2000 9 Second Wheelie 9.5@147 RSP S2K 1/4 Mile Drag Pass 9.548@147.23 REAL STREET PERFORMANCE (http://www.youtube.com/watch?v=w5zhwl_9n0Y#ws)
Do work!
-
No one has the rhmt file ???
No but if you promise to send me some stickers back, I can send you some of my unused stickers. :noel:
I'll take a picture at lunch and send it to you. :noel:
-
No one has the rhmt file ???
No but if you promise to send me some stickers back, I can send you some of my unused stickers. :noel:
I'll take a picture at lunch and send it to you. :noel:
If I can get a good decent picture, i can open it in my software and convert it to vector file. who did the originals?
also will need measurements.
if you want to mail them, ill get them back to you when i was done with them, just need one...
the hardest part is going to be making the "real" look the same, i might be able to save the image in the upper left of my screen, cut the HMT out of it and convert it... I'm not super fluent in this software stuff still....
-
S2000 9 Second Wheelie 9.5@147 RSP S2K 1/4 Mile Drag Pass 9.548@147.23 REAL STREET PERFORMANCE (http://www.youtube.com/watch?v=w5zhwl_9n0Y#ws)
Do work!
same exact drive line as me but I make 100 morehp thought lol need to get the suspension dailed and it should atleast go low 9's
-
No one has the rhmt file ???
No but if you promise to send me some stickers back, I can send you some of my unused stickers. :noel:
I'll take a picture at lunch and send it to you. :noel:
If I can get a good decent picture, i can open it in my software and convert it to vector file. who did the originals?
also will need measurements.
if you want to mail them, ill get them back to you when i was done with them, just need one...
the hardest part is going to be making the "real" look the same, i might be able to save the image in the upper left of my screen, cut the HMT out of it and convert it... I'm not super fluent in this software stuff still....
I have versions made by Imburne with the " real" red where you make it look like a stamp on the rest of the sticker to look like it was approved.
Also when I take the pictures I'll have a scale/ruler in it.
If you can fin Levi's (UI) pictures of his car he has the same stickers in his rear windows of his coupe. :noel:
-
That thing is fucking sweet!
-
No one has the rhmt file ???
No but if you promise to send me some stickers back, I can send you some of my unused stickers. :noel:
I'll take a picture at lunch and send it to you. :noel:
If I can get a good decent picture, i can open it in my software and convert it to vector file. who did the originals?
also will need measurements.
if you want to mail them, ill get them back to you when i was done with them, just need one...
the hardest part is going to be making the "real" look the same, i might be able to save the image in the upper left of my screen, cut the HMT out of it and convert it... I'm not super fluent in this software stuff still....
I have versions made by Imburne with the " real" red where you make it look like a stamp on the rest of the sticker to look like it was approved.
Also when I take the pictures I'll have a scale/ruler in it.
If you can fin Levi's (UI) pictures of his car he has the same stickers in his rear windows of his coupe. :noel:
Ok sounds good, Does anyone know if Imburne is still around? Id like to see if he can send me the vector file to use with my cutter...
-
No one has the rhmt file ???
No but if you promise to send me some stickers back, I can send you some of my unused stickers. :noel:
I'll take a picture at lunch and send it to you. :noel:
If I can get a good decent picture, i can open it in my software and convert it to vector file. who did the originals?
also will need measurements.
if you want to mail them, ill get them back to you when i was done with them, just need one...
the hardest part is going to be making the "real" look the same, i might be able to save the image in the upper left of my screen, cut the HMT out of it and convert it... I'm not super fluent in this software stuff still....
I have versions made by Imburne with the " real" red where you make it look like a stamp on the rest of the sticker to look like it was approved.
Also when I take the pictures I'll have a scale/ruler in it.
If you can fin Levi's (UI) pictures of his car he has the same stickers in his rear windows of his coupe. :noel:
Ok sounds good, Does anyone know if Imburne is still around? Id like to see if he can send me the vector file to use with my cutter...
He is just send him a pm, I'll text him to check his PMs. :noel:
-
No one has the rhmt file ???
No but if you promise to send me some stickers back, I can send you some of my unused stickers. :noel:
I'll take a picture at lunch and send it to you. :noel:
If I can get a good decent picture, i can open it in my software and convert it to vector file. who did the originals?
also will need measurements.
if you want to mail them, ill get them back to you when i was done with them, just need one...
the hardest part is going to be making the "real" look the same, i might be able to save the image in the upper left of my screen, cut the HMT out of it and convert it... I'm not super fluent in this software stuff still....
I have versions made by Imburne with the " real" red where you make it look like a stamp on the rest of the sticker to look like it was approved.
Also when I take the pictures I'll have a scale/ruler in it.
If you can fin Levi's (UI) pictures of his car he has the same stickers in his rear windows of his coupe. :noel:
Ok sounds good, Does anyone know if Imburne is still around? Id like to see if he can send me the vector file to use with my cutter...
He is just send him a pm, I'll text him to check his PMs. :noel:
Could not find the sticker at lunch in the black hole known as my garage.
But I did find some pictures of what it looks like on UI's car.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi653.photobucket.com%2Falbums%2Fuu254%2F92CXyD%2FIMG346.jpg%3Ft%3D1336904490&hash=d12748c8fb6b9c3d934238e827c792e63282dd67)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi154.photobucket.com%2Falbums%2Fs248%2FUrban_Indian%2FDynamat%2F56ea9c01.jpg&hash=195c2fb72e2ef03ea4ed00569871a1c423710d25)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi154.photobucket.com%2Falbums%2Fs248%2FUrban_Indian%2FDynamat%2F81550807.jpg&hash=d8afddef9434cac21f2cfdbb49ccc38f2b0f44f6)
and pict compared to some other known sized stickers :noel:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi154.photobucket.com%2Falbums%2Fs248%2FUrban_Indian%2FDynamat%2F5627b8bd.jpg&hash=50468386329e28b1ec92f1d9acaf2b06eac83a83)
-
someone had sent me black ones of both for the HT article. They're on my (old) coldside charge pipe (on a shelf in my garage), and the pathfinder LOL
-
Why not just real hmt ? That way ya ain't reppin that other fail of a site
-
Why not just real hmt ? That way ya ain't reppin that other fail of a site
You mean this:
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi653.photobucket.com%2Falbums%2Fuu254%2F92CXyD%2FNose%2520work%2520on%2520my%2520ride%2FIMG202.jpg%3Ft%3D1331902964&hash=dc4471f0e479dd1f272b6b19d4baad051b3fc312)
So people know what coming at them and who is the lead dog after I pass them. :noel:
-
Just like the top left,logo on the page copy that to a t