:::RHMT::: Real Home Made Turbo
General Category => General Discussion => Topic started by: krazy4 on June 10, 2012, 11:03:47 PM
-
Im gathering parts for my next build.
Want to do an F22 turbo EG.
Here is what I have so far:
F22A6 (Gonna run the stock motor until it blows since it was free, then put some H22 rods and 4g63 stroker pistons in it.)
LS B-series tranny (Free)
HX52 turbo (kinda big, but I got if for practically free)
Gonna do the ghetto F2B setup with no plate.
I have all the fabrication stuff under control but I need suggestions on nog cheap fuel parts.
What injectors, fuel pump, and ecu program would you guys use for 400whp on E85?
-
pump: rewired walbro 255hp (good to like 450-500 on E85)
injectors: HiProfile has the hookup on some ~950s (good to like 450-500 on E85)
management: ask whoever is gonna tune it.
sounds like a good setup... make a build thread! 8)
-
pump: rewired walbro 255hp (good to like 450-500 on E85)
injectors: HiProfile has the hookup on some ~950s (good to like 450-500 on E85)
management: ask whoever is gonna tune it.
sounds like a good setup... make a build thread! 8)
+1, full detail w/ lots of pictures and explanations would be kool. :noel: O0
-
hx52 is perfect size. thats why somone should buy my tits one :noel:
hury up and boost it nigger
-
Thanks for the help nogs. No point to start a build thread, dont even have the damn car yet. lol
This is gonna be a long time in the making. Trying to come up on lots of parts for free or :Jew: cheap because im one poor ass nigger.
Car should haul ass though when its done. I'm gonna cut the fuck outta the car. It will be light.
-
hx52 is perfect size. thats why somone should buy my tits one :noel:
hury up and boost it nigger
I agree fully, that is the turbo my car really needs, the 35 is just too small, esp with a T3 housing...
put H head on, and good bottom end parts and crank the fucking boost up!
Oh BTW, i have a set of Eagle H22 rods if you are looking for some...
-
Yeah hopefully the 52 isn't too laggy. It'll hit like a freight train that's for sure.
This turbo is really awesome though. 67mm and it has a billet wheel. Pretty cool shit.
I'm gonna pass on the eagle rods. I'm trying to get some oczc rods from Tom.
I might just end up running stock F22's though. They're disposable enough. lol
-
Yeah hopefully the 52 isn't too laggy. It'll hit like a freight train that's for sure.
This turbo is really awesome though. 67mm and it has a billet wheel. Pretty cool shit.
I'm gonna pass on the eagle rods. I'm trying to get some oczc rods from Tom.
I might just end up running stock F22's though. They're disposable enough. lol
It shouldn't be too laggy, my 16cm hx52 is full boost, (18lb) at around 35-3800... i would guess the 52 would be lit at around 40-4200 on my car... they light pretty quick and make awesome power.
-
I'm gonna pass on the eagle rods. I'm trying to get some oczc rods from Tom.
lol
-
I'm gonna pass on the eagle rods. I'm trying to get some oczc rods from Tom.
lol
lol, seems pretty hard to get.
He said he was machining more, so hopefully that's true.
-
I'm gonna pass on the eagle rods. I'm trying to get some oczc rods from Tom.
lol
lol, seems pretty hard to get.
He said he was machining more, so hopefully that's true.
When you're as in demand as Tom is, its hard to make time.
Especially when it means taking a break from a high dollar build to turn out another batch for basically no profit.
It's worth the wait trust me.
-
Oh, I'm definitely waiting. The price is too good not too. lol :Jew: