:::RHMT::: Real Home Made Turbo

General Category => Fabrication => Topic started by: mycarslow on April 19, 2009, 07:38:36 PM

Title: traction bars on a 96-00 civic
Post by: mycarslow on April 19, 2009, 07:38:36 PM

whos made there own traction bars... im looking into making a set but was want to see what others have made

Title: Re: traction bars on a 96-00 civic
Post by: CSaddict on April 20, 2009, 11:00:12 AM

Contact Aaron Weir @ www.Weirtech.ca (http://) He has a great kit for traction bars. All you need to supply is rod ends, tube and links.

Title: Re: traction bars on a 96-00 civic
Post by: mycarslow on April 20, 2009, 01:07:07 PM

thanks for the reply

Title: Re: traction bars on a 96-00 civic
Post by: onlyflash944 on April 20, 2009, 01:16:23 PM

while we are on this subject, anyone have the link for the madd cheap heim joints?  lost all my favorites the last hd failure i was fourtnate enough to have

Title: Re: traction bars on a 96-00 civic
Post by: turbob16hatch on April 20, 2009, 01:31:14 PM

haha cheap heims would kick ass, last time i bought them i paid $90 for 4 moly heims.

Title: Re: traction bars on a 96-00 civic
Post by: mycarslow on April 20, 2009, 01:44:53 PM

i looked at a kew kits online for some ideals what do you all think are better blot in or weld in ..
im open minded on both set up but would like to know the pros and cons of each

Title: Re: traction bars on a 96-00 civic
Post by: CSaddict on April 20, 2009, 04:22:28 PM

www.speedwaymotors.com (http://) is where I got my rod ends.

Title: Re: traction bars on a 96-00 civic
Post by: onlyflash944 on April 20, 2009, 04:57:13 PM

yep, thats the one








i said joint on 4/20   O0

Title: Re: traction bars on a 96-00 civic
Post by: ratcityrex on April 20, 2009, 07:14:04 PM

I got my swedge tubes from them too. I think they were around $12 each and one end was reverse thread too.  :D

Title: Re: traction bars on a 96-00 civic
Post by: mycarslow on April 22, 2009, 01:48:29 PM

what kind of lines am i looking for for the bars that tie into the lower control arms like a stright bar or like 45 or does it really mater?

Title: Re: traction bars on a 96-00 civic
Post by: jdmhatchracer94 on April 23, 2009, 03:51:18 PM

I built mine for my 99 coupe for dirt only thing that cost was the joints I went through grainger. (company account so I reallly didn't even pay for them). I'll see if I got any pics when I get home

Title: Re: traction bars on a 96-00 civic
Post by: danz on April 23, 2009, 07:29:06 PM

http://www.realhomemadeturbo.com/forum/index.php?topic=137.0 (http://www.realhomemadeturbo.com/forum/index.php?topic=137.0)