:::RHMT::: Real Home Made Turbo

General Category => General Discussion => Topic started by: turbostd on April 27, 2009, 11:25:41 AM

Title: project take 2 and make one
Post by: turbostd on April 27, 2009, 11:25:41 AM

So now that it is nice out I got an itch to go riding again. Last time I had my 200x out last year I went through more oil than gas. I have a 200s sitting here with a fresh top end but a broken crank so I decided to take the 2 and make one good one. I pulled both motors and have them torn down. I was originally just going to use the rings from the 200s and use the 200x piston and jug since its higher compression but I come to find out the x piston is .25 over so im just going to use the s jug head and piston on the x bottom.

(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi280.photobucket.com%2Falbums%2Fkk177%2Fturbostd%2F3wheeler%2FIMAG0708.jpg&hash=99181a52ea4ae7b7a0f7a91201fd227fd256c9cf)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi280.photobucket.com%2Falbums%2Fkk177%2Fturbostd%2F3wheeler%2FIMAG0709.jpg&hash=fb1f58f5cbeaf9ed97330dd8695a9af92b9f22a9)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi280.photobucket.com%2Falbums%2Fkk177%2Fturbostd%2F3wheeler%2FIMAG0710.jpg&hash=d4a73db3efeb830b06f734c6874729c757d59c9c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi280.photobucket.com%2Falbums%2Fkk177%2Fturbostd%2F3wheeler%2FIMAG0711.jpg&hash=5c836afa873487978f0e7498539fcf50ebaf7682)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi280.photobucket.com%2Falbums%2Fkk177%2Fturbostd%2F3wheeler%2FIMAG0712.jpg&hash=b06dc83033d29e76af2230160c0ca0b98138eda5)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi280.photobucket.com%2Falbums%2Fkk177%2Fturbostd%2F3wheeler%2FIMAG0713.jpg&hash=b1737ecf2a3778c7656952db09bb7ff9bb7c1b16)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi280.photobucket.com%2Falbums%2Fkk177%2Fturbostd%2F3wheeler%2FIMAG0714.jpg&hash=3dd25cf70a2b81152118c5c8ca2098d8d9fdb0b7)

Title: Re: project take 2 and make one
Post by: Sinister on April 27, 2009, 12:34:15 PM

Get it running, then take it off of some sweet jumps