:::RHMT::: Real Home Made Turbo

General Category => Hybrid/Tech => Topic started by: walter on November 09, 2012, 07:25:38 PM

Title: any basemap plz?
Post by: walter on November 09, 2012, 07:25:38 PM

D16 12:1 , not sure if you have some screenshoots of timing maps around there , lmk

Thanks!

Title: Re: any basemap plz?
Post by: jabberwock on November 10, 2012, 01:43:58 PM

Vtec? Cam(s)?

Title: Re: any basemap plz?
Post by: walter on November 10, 2012, 08:15:22 PM

sorry , Z6 w/ 59300 zex and p29 pistons.

Title: Re: any basemap plz?
Post by: JaredKaragen on November 10, 2012, 09:40:24 PM

Generally you won't see above 20-22* of timing in the 10psi range; other than that you should build and tune a regular basemap to get going

Injectors and can make it basically a crapshoot wether it will run at first or not.

Title: Re: any basemap plz?
Post by: walter on November 10, 2012, 10:35:14 PM

engine will runs NA only. not boosted. thanks for your reply!

Title: Re: any basemap plz?
Post by: Foowee on November 15, 2012, 04:16:55 AM

obd-0/1?

Title: Re: any basemap plz?
Post by: walter on November 17, 2012, 10:14:11 AM

It's EG D16z6 with crome gold.i will try to post some screenshoots of timing map this week. anyway if someone has a tuned map just for reference i'd appreciate it a lot.

thanks!

Title: Re: any basemap plz?
Post by: walter on November 20, 2012, 06:43:46 PM

i will post a screenshoot of low cam timing map tonight, sometimes it knock and sometimes it doesnt in small areas, i think problem could be in spark plugs i will try with 7 heat range..i have to say too i had to retarded about 12-13 degrees... :-\