:::RHMT::: Real Home Made Turbo

General Category => Forced Induction => Topic started by: yamaha6611 on April 28, 2013, 02:38:29 PM

Title: quick question.
Post by: yamaha6611 on April 28, 2013, 02:38:29 PM

garrett GT3571 on b18c5?

ar. 50 cold

1.18 hot

hp goal- 350.


thanks

Title: Re: quick question.
Post by: ratcityrex on April 28, 2013, 04:37:16 PM

Quick answer........ Lag

Title: Re: quick question.
Post by: PhilStubbs on April 28, 2013, 05:37:40 PM

Yea, .68 or GTFO

If that was my goal I'd go hx35 though.

Title: Re: quick question.
Post by: boosted 00 black si on April 29, 2013, 08:26:29 PM

Agreed ditch that gtblah and get a holslut :noel:

Title: Re: quick question.
Post by: Joseph Davis on April 29, 2013, 09:05:34 PM

HX35 is about as laggy as a properly sized GT35.  Do not want.  Get a cheap 57 or 60 trim T3/T04E with a big turbine wheel and. 63/.82 hotside.  Spool a lot faster and give a better powerband for a pussy 350whp setup.

Title: Re: quick question.
Post by: jabberwock on April 29, 2013, 09:19:59 PM

Twin scroll that shit

Title: Re: quick question.
Post by: PhilStubbs on April 30, 2013, 08:10:17 AM

Where do the HY35's run out of steam? Those spool like nobody's business, just worried 300 might be its max

Title: Re: quick question.
Post by: Joseph Davis on April 30, 2013, 08:36:08 AM

I'm reasonably sure I maxed DSharp's HY35 F22B combo at 370-380 uncorrected.  Good looking powerband.

Title: Re: quick question.
Post by: PhilStubbs on April 30, 2013, 10:18:53 AM

I tuned a b16 with an hy35 at 10psi a while back. It was just a street tune, but that was the most stout 10psi tune I have ever done. Quick spool. I'm looking forward to seeing what it actually out down.