:::RHMT::: Real Home Made Turbo

General Category => Hybrid/Tech => Topic started by: papercuts on December 03, 2013, 09:13:51 AM

Title: A series parts
Post by: papercuts on December 03, 2013, 09:13:51 AM

I cant remember were i found it a long time ago. Hut arnt some b series internals able to be used in the a series blocks. I remember a b series type r intake will bolt up bit forget on the internals.

Title: Re: A series parts
Post by: 92CXyD on December 03, 2013, 10:19:38 AM

http://www.realhomemadeturbo.com/forum/index.php/topic,651.msg191014.html#msg191014 (http://www.realhomemadeturbo.com/forum/index.php/topic,651.msg191014.html#msg191014)  reply #167

My favorite build car there at the '10 Dyno day, 86-89 Accord w/ A20a3, K-series pistons, B18 h-beams rods, Skunkworks CTR/ITR intake and MS2. The kid is 17yrs. old and he did all of it himself.

Flat_black's  B20a5 very similar to the A20a3
http://www.realhomemadeturbo.com/forum/index.php/topic,22500.msg221000.html#msg221000 (http://www.realhomemadeturbo.com/forum/index.php/topic,22500.msg221000.html#msg221000)


accordepicenter's thread
http://www.realhomemadeturbo.com/forum/index.php/topic,16496.msg198433.html#msg198433 (http://www.realhomemadeturbo.com/forum/index.php/topic,16496.msg198433.html#msg198433)
His build thread
http://www.realhomemadeturbo.com/forum/index.php/topic,15594.msg186216.html#msg186216 (http://www.realhomemadeturbo.com/forum/index.php/topic,15594.msg186216.html#msg186216)

Title: Re: A series parts
Post by: HiProfile on December 08, 2013, 01:49:15 AM

If you can get lengths, widths, and diameters of all the components & journals, the world will be yours. I've seen many instances where a component from one motor brand will fit in another. Vitaras are one example, but more unusual things like H22 rods in SR20's.