:::RHMT::: Real Home Made Turbo
General Category => Fabrication => Topic started by: AstroVannin on May 09, 2009, 10:33:08 PM
-
Just a couple quick pics of the manifold for Sir-Dragsalot II
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi384.photobucket.com%2Falbums%2Foo286%2FAstroVannin%2Fsony_camera_stuff_079.jpg&hash=09c1871d46f32c916091d93a94b4397278866f6c)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi384.photobucket.com%2Falbums%2Foo286%2FAstroVannin%2Fsony_camera_stuff_080.jpg&hash=95a3fae60c8cecfe1ac6c004cffa1ad172ac84b8)
-
Damn, that shit is beasting.
-
awesome!!
-
rofl
true HMT right there
-
was this motor pulled from the ocean ? :-\
-
looks like the squarefold molested the nog log and had a bastard child
-
OH NOES
ive dream about such shit last week :?:
NOW IAM SCARED
-
Squarefold v2.01
-
best manifold evar?
-
Fuck Yeah!!!!!! :yes:
-
Popping your hood has now become.. priceless 8)
-
was this motor pulled from the ocean ? :-\
Its been blown up and sitting behind the shop for a minute now :yes:
mock up purposes only
-
best manifold evar?
I cant take credit for this awesomeness. (unfortunatly)
Its my friend Rob's ..... I said I would post some pics for him.
Pics of the rest of the build to follow.
-
whats even scarier, i built that in about 2 hours on the vodka.
-
bad ass.
-
awesome classic rHMT right there
-
Gota love the turbine housing welded right to the manifold. O0
-
RHMT Approved! :yes:
-
Gota love the turbine housing welded right to the manifold. O0
not welded to the manifold looks bolted on to be.
-
its both. :-X
-
its both. :-X
No...its just bolted.
-
that looks like absolute shit. good job
-
Thats some shit right there, fucking awesome. All he needs now is the FUCK YOU dump pipe
-
excellent idea, the downpipe wil in fact be emblazoned with fuck you. thanks :noel:
-
due to hard economic times, the box manifold will soon be replacing the log manifold on the market
hes just one step ahead of the game
-
Tite
-
weld a 14b on it too.
compound FTW!
-
Lol, thats def. RHMT shit right there. :somb:
-
i was so dissipointed when i saw the side pic and saw the runners. i was hoping for a simple box with holes in it lol
-
i was so dissipointed when i saw the side pic and saw the runners. i was hoping for a simple box with holes in it lol
Shit..... that would be AWESOME.
At least the "runners" are pipe elbows welded to the stock... cut off... flanges.
Thats GOTTA count for somthing.
-
to be honest it was just going to come out of the side of the engine but i discovered that i had some clearance issues, so it had to be a top mount square fold. but some more news, i found a first gen 2.5 engine, the first year they put the injected 2.5 in the s truck. from this i will build the killer motor and boost the fuck out of it. im going to punch it out as far as i can physically and go from there. arp studs top and bottom, steel marine timing gears, copper head gasket, balanced everything. should be good for 300hp plus.
-
300whp out of a shitty gm motor.in an even shittier truck man... thats gonna be killer.... :somb:
-
300whp out of a shitty gm motor.in an even shittier truck man... thats gonna be killer.... :somb:
Didnt you have some kind of boosted S-10 at some point?
I thought I remembered somthing liek that fron the old site, but I cant recall anything else about it.
-
shitty is the is the way to roll. only fags drop baffed out 305's in an s truck.
-
to be honest it was just going to come out of the side of the engine but i discovered that i had some clearance issues, so it had to be a top mount square fold. but some more news, i found a first gen 2.5 engine, the first year they put the injected 2.5 in the s truck. from this i will build the killer motor and boost the fuck out of it. im going to punch it out as far as i can physically and go from there. arp studs top and bottom, steel marine timing gears, copper head gasket, balanced everything. should be good for 300hp plus.
I think you can stuff that thing with mercruser 3.0 bottom end parts and make it a 3 liter.
-
ok, there has been a disruption in the force, i have aquired a caddy with a northstar v-8
i am thinking of turning that motor in the right direction and putting in the suck ten.
any thoughts or ideas concerning this? im pretty sure the northstar has the same bell housing as the 2.5. i think the northstar makes like 280 hp. i think i will put the snail on that
-
i think i will put the snail on that
what tuning options are there for that platform?
-
pound all the compressed air to it that you can and pray it holds together. i did some reading and that engine does in fact accept the same bellhousing as my s truck. the cad motor makes 300hp stock. i cant wait to get started
-
;D Hell yes!
-
ok, there has been a disruption in the force, i have aquired a caddy with a northstar v-8
i am thinking of turning that motor in the right direction and putting in the suck ten.
any thoughts or ideas concerning this? im pretty sure the northstar has the same bell housing as the 2.5. i think the northstar makes like 280 hp. i think i will put the snail on that
Too much thinking, just do it! :yes:
-
ok hersw a kind of update to the suck ten, completed the intake manifold adapter, just waiting on dustin to make the wiring harness. northstar deal went south, to complicated to bother with. i will have some more pictures soon and hopefully in two weeks i will be boosting till i bust it
-
That is the most awesome mani. ever :yes:lol
-
haha that manifold is sick
-
lol nice manifold
-
speechless ;D
-
Its funny how you spent more wire to write down GANGSTA than to weld the entire manifold :noel:
-
So this manifold was built in May, wtf ever happened to the rest of the build???
-
So this manifold was built in May, wtf ever happened to the rest of the build???
the block split in two just from knowing the manifold was bolted on it
its a SBC, not a Ford motor
-
So this manifold was built in May, wtf ever happened to the rest of the build???
Kinda stalled for a minute or 2
Ive still gotta make the plug and play affair for the AEM F/IC ... which is just me making the time for it.