:::RHMT::: Real Home Made Turbo

General Category => Forced Induction => Topic started by: efsohcFTW on February 08, 2015, 05:35:35 PM

Title: Vitara Pistons & skunk2 rods ( wrist wont go threw due to raised area)
Post by: efsohcFTW on February 08, 2015, 05:35:35 PM

So im DOING my first vitara build. Just got my block back from machine shop getting bore & honed to 75.mm, Notched, & Line bored. Woke up today with intensions of assembly everything. Than i find out wrist pin wont go thru piston and rod due to raised area inside piston. Its putting everything in a bind! Any past experiences & solutions would be greatly appreciated! Thanks in advance.

Title: Re: Vitara Pistons & skunk2 rods ( wrist wont go threw due to raised area)
Post by: efsohcFTW on February 08, 2015, 06:07:12 PM

this raised area

Title: Re: Vitara Pistons & skunk2 rods ( wrist wont go threw due to raised area)
Post by: jdmhatchracer94 on February 08, 2015, 06:37:16 PM

Fuck you read how to do a intro post then might get help.

Did you really get your block bored to 75mm?

Title: Re: Vitara Pistons & skunk2 rods ( wrist wont go threw due to raised area)
Post by: ratcityrex on February 08, 2015, 06:43:22 PM

Your retarded. All this Is found if you type in your question into this thing that searches the Internet for answers.  It's called google....lol now follow the rules here. You need a intro post.

here is how something like that is done

http://www.realhomemadeturbo.com/forum/index.php/topic,14535.0.html (http://www.realhomemadeturbo.com/forum/index.php/topic,14535.0.html)

or something like this too works

http://www.realhomemadeturbo.com/forum/index.php/topic,25.0.html (http://www.realhomemadeturbo.com/forum/index.php/topic,25.0.html)

Title: Re: Vitara Pistons & skunk2 rods ( wrist wont go threw due to raised area)
Post by: efsohcFTW on February 08, 2015, 07:24:56 PM

75.5mm my bad. Sorry i didnt put porn in my intro

Title: Re: Vitara Pistons & skunk2 rods ( wrist wont go threw due to raised area)
Post by: highroller54 on February 08, 2015, 07:35:24 PM

Quote from: efsohcFTW on February 08, 2015, 07:24:56 PM

i didnt put porn in my intro

I didn't put the info you need to build your motor in my response, sorry.

Title: Re: Vitara Pistons & skunk2 rods ( wrist wont go threw due to raised area)
Post by: jdmhatchracer94 on February 08, 2015, 07:39:40 PM

Douche

Title: Re: Vitara Pistons & skunk2 rods ( wrist wont go threw due to raised area)
Post by: crxvtec91 on February 12, 2015, 05:40:05 PM

Rhmt self regulating hhahahahahah

Title: Re: Vitara Pistons & skunk2 rods ( wrist wont go threw due to raised area)
Post by: ApexSilver06MR on March 01, 2015, 12:58:19 AM

Nice signature fgt