:::RHMT::: Real Home Made Turbo
General Category => Hybrid/Tech => Topic started by: walter on November 24, 2015, 06:47:00 PM
-
everything i found many cutted wires. was a hard work to get everything good, ok, finally today i deciced to start engine up , everything is good, I adapted oem engine harness to the new engine, used a good chipped ecu working, made a basemap , disabled Vtec sensos, o2 sensor, VSS sensor too because i used a cable vss. everything looks good, start it up really good, but the problem is i got solid cel, the ecu i used is mine and it works good but anyway i tried with other ecu and samething happens, even stock ecu i used lol , samething happens, i dont know what im missing, iat, tps, map, engine coolant sensor ,etc works in datalogging (crome PRO), i dont wire 5 O2 sensor (but it's disabled in crome features) and VTEC pressure and soneloid (dissabled too) yet.
Main relay sounds good and works ok to me. any input should be appreciate it a lot!!
Thanks.
-
Hi! problem was cluster, customer installed VT version cluster, was really weird problem, also he used a ebay wiring harness, replaced it with a good one too.
-
Have my transmissions swapped and everything bolted up wcu changed and everything but the speedometer isnt working. Does anyone know the wiring to make this work or have a diagram that tells you what wires go where? Any help would be appreciated thanks
dude you really should make new threads for your specific issues with all the details... unless you are walter how would we know how to begin to help you. Im gonna tell you we are a very small group of knowledgeable friends and even though its possible for new people to be let in we are very cautious and try to filter out the people that are idiots, i dont want to say you are an idiot but you are very close to meeting the wednesday hammer.